GL3J 23 / SVQ 3 Jewellery and Silverware Manufacturing at SCQF level 6
To attain the qualification candidates must complete XUnits in total. This comprises:
All Candidates must complete all 7 mandatory units from group A. Candidates undertaking Pathway A must complete all 3 mandatory units from Group B and 2 optional unit from Group C. Candidates undertaking Pathway B must complete the 2 mandatory units from Group D and 2 optional units from Group E

Please note the table below shows the SSC identification codes listed alongside the corresponding SQA Unit codes. It is important that the SQA Unit codes are used in all your recording documentation and when your results are communicated to SQA.

Group A —Mandatory Units for all candidates
SQA code / SSCcode / Title / SCQF level / SCQF credits
H9V4 04 / J3.1 / Contribute to the Maintenance and Preparation of the Jewellery or Silversmithing Workshop Environment / 6 / 3
H9V5 04 / J3.2 / Produce Jewellery, Silverware or Engraving from Detailed Drawings and Specifications / 6 / 6
H9V6 04 / J3.3 / Mark out and Measure Materials for Jewellery Manufacture or Silversmithing / 6 / 10
H9V7 04 / J3.4 / Demonstrate and Apply an Understanding of Metallurgy to your Jewellery or Silversmithing Work / 7 / 9
H9V8 04 / J3.5 / Saw and Pierce Jewellery or Silverware Components / 6 / 11
H9V9 04 / J3.13 / Use Mechanical Methods of Joining Jewellery or Silverware / 7 / 8
H9VA 04 / J3.22 / Keep up-to-date with the Jewellery Industry, Allied Trades and Related Technologies / 6 / 6
Group B — Jewellery Manufacturing— Mandatory Units
SQA code / SSCcode / Title / SCQF level / SCQF credits
H9VC 04 / J3.6 / Form Jewellery Components / 6 / 12
H9VD 04 / J3.9 / Join Jewellery Components by Soldering / 7 / 9
H9VE 04 / J3.14 / Polish and Finish Jewellery or Silverwork to a Commercial Standard / 7 / 19
Group C— Jewellery Manufacturing - Optional Units — candidates must take two Units
H9VF 04 / J3.7 / Produce Rubber Moulds for Lost Wax Casting / 6 / 9
H9VG 04 / J3.8 / Produce Components by Wax Casting / 6 / 11
H9VH 04 / J3.12 / Join Silverware Components by Soldering / 6 / 6
H9VJ 04 / J3.15 / Produce CAD/CAM Jewellery or Silverware Designs and Prototypes / 7 / 23
H9VK 04 / J3.16 / Produce Engraved Surfaces / 6 / 21
H9VL 04 / J3.18 / Produce Enamelled Surfaces / 7 / 26
H9VM 04 / J3.19 / Produce Tools or Jigs for use in the Manufacturing Process of Jewellery or Silversmithing / 5 / 8
H9VN 04 / J3.20 / Set Gemstones by Hand / 6 / 8
H9VP 04 / J3.21 / Carry out Electro-deposition on Jewellery or Silverware Components / 6 / 9
Group D—Silverware Manufacturing — Mandatory Units
H9VR 04 / J3.10 / Form Silverware Components / 6 / 15
H9VH 04 / J3.12 / Join Silverware Components by Soldering / 6 / 6
Group E — Silverware Manufacturing — Optional Units — candidates must take two Units
SQA code / SSCcode / Title / SCQF level / SCQF credits
H9VF 04 / J3.7 / Produce Rubber Moulds for Lost Wax Casting / 6 / 9
H9VG 04 / J3.8 / Produce Components by Wax Casting / 6 / 11
H9VD 04 / J3.9 / Join Jewellery Components by Soldering / 7 / 9
H9VT 04 / J3.11 / Produce Spun Silverware Components / 6 / 13
H9VE 04 / J3.14 / Polish and Finish Jewellery or Silverwork to a Commercial Standard / 7 / 19
H9VJ 04 / J3.15 / Produce CAD/CAM Jewellery or Silverware Designs and Prototypes / 7 / 23
H9VK 04 / J3.16 / Produce Engraved Surfaces / 6 / 21
H9VV 04 / J3.17 / Produce Chased Items / 7 / 14
H9VL 04 / J3.18 / Produce Enamelled Surfaces / 7 / 26
H9VM 04 / J3.19 / Produce Tools or Jigs for use in the Manufacturing Process of Jewellery or Silversmithing / 5 / 8
H9VN 04 / J3.20 / Set Gemstones by Hand / 6 / 8
H9VP 04 / J3.21 / Carry out Electro-deposition on Jewellery or Silverware Components / 6 / 9

GL3J 23 SVQ 3 Jewellery and Silverware Manufacturing at SCQF level 61