Full Paper-Template for Proceedings

Full paper-template for Proceedings

Please read the following instructions carefully.

Submission Deadline for the full paper: 15th August 2017

Please send your paper abstract to

Typing Instructions:

The data file is sized in the German DIN A4 format (21 cm wide x 29.7 cm long). Please check your page setting and ensure that you will always use the German DIN A4 format. Please use Arial 12 pt for font type and size. The title of the abstract should be written in Arial 15 pt bold. Please use 1.5 line spacing for continuous text and justify the text, i.e. align the text to both the left and the right margins (e.g. the text of this document is justified). We recommend using this pattern to produce your paper for Printing Future Days 2017 conference proceedings. Margins, lettertype and line spacing are already preformatted. The paper should not exceed 2200 words (including all words) or 6 pages! Please submit your abstract as PDF and .doc/.docx.

Papers must be written in English. Once your contribution is submitted, changes, corrections or rewording will not be possible. The papers should be copy-edited carefully before submission.

Title (Arial, 15 pt, bold)

Author´s name and surname1*, Co-Author´s name and surname2, ... (Arial, 10 pt)

1University/Company, Department, City, Country (Arial, 10 pt, italic)

2University/Company, Department, City, Country (Arial, 10 pt, italic)

*Corresponding author:

Keywords: maximum 4 keywords (Arial, 10 pt)

Abstract (Arial, 12 pt, bold)

At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore. Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor nvidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. Lorem ipsum dolor sit amet [1]. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat.

1. Section (Introduction)

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor nvidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet [2].

Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi. Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat [3].

2. Section (Experimental Setup or Materials and Methods)

2.1 Subsection (Arial, 11pt, bold)

Nam liber tempor cum soluta nobis eleifend option congue nihil imperdiet doming id quod mazim placerat facer possim assum. Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat. Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis Fig. 1.

Fig. 1 (Arial, 10 pt, bold): Gravure printing press molestie consequat, vel illum dolore eu feugiat nulla facilisis molestie consequat, vel illum dolore eu feugiat nulla facilisis (Arial, 10 pt, 1.0 line spacing)

2.2 Subsection

At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, At accusam aliquyam diam diam dolore dolores duo eirmod eos erat, et nonumy sed tempor et et invidunt justo labore Stet clita ea et gubergren, kasd magna no rebum.

3. Section (Results and Discussion)

3.1 Subsection (Method 1)

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua.

Table 1: (Arial, 10 pt, bold) Parameters and Speed (Arial, 10 pt)

Parameter 1 / Parameter 2 / Parameter 3
Speed 1 / 23 (Arial, 10 pt) / 75 / 90
Speed 2 / 12 / 55 / 67

Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi.

3.2 Subsection (Method 2)

At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, At accusam aliquyam diam diam dolore dolores duo eirmod eos erat, et nonumy sed tempor et et invidunt justo labore Stet clita ea et gubergren, kasd magna no rebum. sanctus sea sed takimata ut vero voluptua. est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat Fig. 2.

Fig: 2: Particle area coverage as function of contact angle

Consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua.

4. Headline 4 (Conclusions and Summary)

Acknowledgement

An acknowledgement (for funding sources etc.) may be placed at the end of the article.

References

[1] F. M. Firstauthor, F. M. Secondauthor, and F. M. Thirdauthor: “Title of the journal contribution”, Journal Name, volume (issue), pagefrom{-pagethrough} (year).

[2] S.-H. Yu, K.-S. Lee, and S.-J. Yook “Film flow around fast rotating roller”, International Journal of Heat and Fluid Flow 30 (4), 9876-9887 (2009).

[3] F. M. Firstauthor, F. M. Secondauthor, and F. M. Thirdauthor: “Title of the Book” {, # Edition} (City: Publisher, year), page or chapter.

[4] R. Ulichney: “Digital Halftoning” (Cambridge MA, USA: MIT Press, 1987), page 111.

[5] {F. M. Contributorname: “Title of the contribution”, in} F. M. Firsteditor, F. M. Secondeditor, and F. M. Thirdeditor (eds.): “Title of the Edited Book” {, # Edition} (City: Publisher, year), page or chapter.

[6] H. Kipphan (ed.): “Handbook of Print Media”, 1st edition (Berlin: Springer, 2004), chapter 1.

[7] F. M. Firstauthor, F. M. Secondauthor, and F. M. Thirdauthor: “Title of the conference contribution”, Proceedings of <name of conference> <year/issue of conference> (organizing body: city, country and year), page or contribution number.

[8] S. Jahn, A. Jakob, I. Reinhold, R. R. Baumann: “Structuring of flexible substrates by the use of an aqueous solution based silver ink”, Proceedings of Digital Fabrication 2008 (IS&T: Pittsburgh PA, USA, 2008), pages 457-460.

[9] F. M. Firstauthor or Hosting body: Title, name of the homepage, URL <url> (last request: <date of last access to the homepage>)

[10] D. Roisum: “Name That Defect 04 – Slip Pimple and what you can imagine on that”, URL http://www.webhandlingblog.com/blog/2009/08/name-that-defect-04.html (last request: 2009-08-12).