Addendum No.1

For the work of -CONSTRUCTION OF COMPOUND WALL WITH GATE AT LATE UTTAMRAO PATIL FOREST PARK FOR CHANDRAPUR RANGE SOCIAL FORESTRY DIVISION CHANDRAPUR ON COMPARTMENT NO. 402 AT CHANDRAPUR (FOR LENGTH 809 METER)

E-Tender No-71787

Name of Division -Public Works Division No 2, Chandrapur

Following Changes / Adding are made in above Tender Please Note.

  1. Security Deposit of the amount specified for the work shall be paid via online using NEFT / RTGS or payment gateway mode or in the shape of DD/BG/ FDR/TDR. DD/BG /FDR/TDR shall be drawn in the favour of Executive Engineer P.W.Dn No II Chandrapur and submit it in sealed envelope in the Office of the Executive Engineer, Public Works Division No.2, Chandrapur within 72 hours (excluding holidays) from the time when control transfer starts. Name of work and e-tender no. shall be written on the envelope.

SCHEDULE “B”

QUANTITY / S.N. / ITEM OF WORK / RATE / Unit / AMOUNT
In Figure / In words
941.09 / Cum / 1 / Excavation for foundation in earth, soil of all types, sand
, gravel and soft murum, including removing the
excavated material up to a distance of 50 m. beyond
the building area and stacking and spreading as
directed, dewatering, preparing the bed for the
foundation and necessary back filling, ramming,
watering including shoring and strutting etc.
complete.(Liftupto1.5ByMechanical Means m.)
a Lift upto 1.50 m
/ 131.05 / Rs. One hundred Thirty One and paise Five only. / One cubic metre / 123330.00
188.22 / Cum / b. Lift from 1.50m to 3.0m. / 245.35 / Rs. Two hundred Fourty Five and paise Thirty Five only. / One cubic metre / 46180.00
5.29 / Cum / 2 / Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m)
By Manual Means / 138.40 / Rs. One hundred Thirty eight and paise Fourty only. / One cubic metre / 733.00
94.11 / Cum / 3 / Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.
/ 1076.30 / Rs. One thousand seventy six and paise Thirty only. / One cubic metre / 101290.00
94.11 / Cum / 4 / Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand / 3637.65 / Rs. Three thousand six hundred thirty seven and paise Sixty five only. / One cubic metre / 342336.00
125.22 / Cum / 5 / Providing and laying Cast in situ/Ready Mix cement concreteM-25 of trap / granite /quartzite/ gneiss metal for R.C.C.work in foundations like raft, strip foundations, grillage
and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surfaceif special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automaticmicro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand / 5696.35 / Rs. Five thousand six hundred Ninety six and paise Thirty five only. / One cubic metre / 713297.00
62.09 / Cum / 6 / Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand / 8543.05 / Rs. Eight thousand five Hundred fourty three and paise five only. / One cubic metre / 530438.00
60.92 / Cum / 7 / Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawingsor as directed including centering, formwork, cover blockslaying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fullyautomatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand / 7619.30 / Rs. Seven thousand six Hundred Ninetyeen and paise Thirty only. / One cubic metre / 464199.00
19.76 / Cum / 8 / Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, plywood/steel formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand / 4711.80 / Rs.Four thousand seven hundred eleven and paise Eighty only. / One Cubic tonne / 93110.00
25.35 / M.T. / 9 / Providing and fixing in position mild steel/ H.Y.S.D.bar
reinforcement of various diameters for R.C.C. pile caps
,footings, foundations, slabs, beams and columns,
canopies, staircases, newels, chajjas,lintels, pardies,coping,
fins, arches etc. as per detailed design and drawing
and schedules including cutting,
bending,hooking the bars,binding with wires or tack welding and
supporting as required completed.
/ 48555.00 / Rs. Fourty eight thousand Five hundred Fifty five and paise Nilonly. / One matric tonne / 1230716.00
67.79 / Cum / 10 / Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. / 4974.80 / Rs. Four thousand Nine hundred seventy four and paise eighty only. / One cubic metre / 337227.00
254.20 / Cum / 11 / Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete / 5143.80 / Rs. Five thousand One hundred Fourty three and paise Eighty only. / One cubic metre / 1307570.00
7083.60 / Sqm / 12 / Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete / 439.75 / Rs. Four hundred Thirty nine and paise Seventy five only. / One square metre / 3115014.00
8097.27 / Sqm / 13 / Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. / 58.70 / Rs. Fifty Eight and paise Seventy only. / One square metre / 398989.00
21.40 / Sqm / 14 / Providing and fixing mild steel grill gate with angle iron frame 65 mm x 65 mm x 10 mm with iron bars at 150 mm C/C and diagonal flats as per the detailed drawing including hinges, pivot blocks locking arrangement welding, revetting with oil painting in three coats of approved colour shade. (Weight of gate 35 kg/Sq.m.) / 1501.45 / Rs. One thousand Five hundred One and paise Fourty Five only. / One Square metre / 32132.00
21.40 / Sqm / 15 / Providing and applying 2 coats of alluminium paint ofapproved make to new structural steel work in buildingsand workshops including scaffolding if necessary, cleaningand preparing the surface (excluding primer coat)etc. complete. / 77.60 / Rs. Seventy seven and paise sixty only. / One Square cubic metre / 1661.00
12.56 / Sqm / 16 / Providing expansion joints with 25 mm thick bituminous
pad as per detailed drowing
/ 695.15 / Rs. Six hundred Ninety Five and paise fifteen only. / One Square metre / 8730.00
2.16 / Sqm / 17 / Providing and fixing informatory sign boaed in square or
rectangular shape of any size made out 16 auge thick
mild steel sheet paint with one coat od zinc chromatic
stovering primer and g two coats green stove enamel paint on
and border/message symbols etc with cut out of Type
IV ( High intensity micro prismatic grade sheeting) Type
xi(Prismatic grade sheeting /3mm to 4 mm thick ACP
sheetting supported including M,S,angle frame of
of size 65mm x65mm x6mm 3.65m lonh properly cross
braced with angle iron of size 50mm x50 mm x5 mm duly
painted with alternate black and white bands of 25 cm
widht including G.I. fixtures etc and fixing the bord in
1;4;8 concrete block of size 60 cmx60 cm x75cm
including transportation etc complete
The nuy bolt of board with angle iron post/supporting
structure after fixing at site has to be written
certificate in orignal should be submitted to the Engineer
in chaarge by the contractor/supplier
/ 6949.45 / Rs. Six thousand Nine hundred fourty nine and paise Fourty five only. / One square metre / 15011.00
36.50 / Sqm / 18 / Providing sand faced plaster for external portion in cement mortar using Kharsalia / Kasaba or similar type of sand, in all positions including base coat of 15 mm. Thick in C.M. 1:4 using water proofing compound at 1 kg per cement bag, curing the same for not less than 3 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in C.M. 1:4 finishing the surface by taking out grains, making grooves and curing for fourteen days scaffolding etc. complete. / 537.50 / Rs. Five hundred thirty seven and paise fifty only. / One square metre / 19619.00
Total / 8957903.00
466.338 / Cum / 19 / Royalty Charges / 141.34 / Rs. One hundred Fouty
One and paise Thirty
Four only
/ One Cubic Metre / 65912.00
Total / 9023815.00

NAME OF WORK CONSTRUCTION OF COMPOUND WALL WITH GATE AT LATE UTTAMRAO PATIL FOREST PARK FOR CHANDRAPUR RANGE SOCIAL FORESTRY DIVISION CHANDRAPUR ON COMPARTMENT NO. 402 AT CHANDRAPUR (FOR LENGTH 809 METER)

S C H E D U L E - "C" (Civil)
Sr.No. / Item of work. / Reference to PWD Standard Specifications / Additional Specifications
1 / Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
/ Bd.A.1 Page No. 259 / -
2 / Exvation for foundation in hard murum including removing the excavated material upto distance of 50 meter beyound the building area and stacking or spreading as
directed preparing the bed for the foundation and necessary back filling ramming
watering including shoring and strutting etc.com
/ Bd.A.2 Page No. 259. / -
3 / Providing soling using 80mm. Size granite /quartzite/ gneiss/ trap metal in15cm.Layers
including hand packing filling voids with sand/grit, ramming, watering complete.
/ As directed by Engineer in charge.
4 / Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand / Bd. E. 1 Page No. 287
5 / Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand / Bd.F.3 Page No. 298 and B.7, Page No.38 / Concrete shall be M-25 grade of trap metal with form finish surface. Concrete vibrator having appropriate diameter needle shall invariably be used
6 / Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand / Bd.F.5 Page No. 300 and B-7,Page No 38.
7 / Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand / Bd.F.6 Page No. 300 and B.7, Page No.38
8 /
Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)
/ Bd.E. 3/Page No. 288/I.S. 456 (2000)
9 / Providing and fixing in position Mild Steel/HYSD bar reinforcement of variousdiameters
for R.C.C. pile caps, footings, foundations, slabs, beams, andcolumns, canopies, staircases,
newels, chajjas, lintels pardies, copings, fins,arches etc. As per detailed design and drawings and
schedules includingcutting, bending, hooking the bars, binding with wires or tack welding and
supporting as required complete.
/ Bd.F.17, Page No. 306 / Steel conforming to I.S. 1786 & IS 432 shal be used.
10 / Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. / As director by engineer in charge and BDG- 2 and 5
11 / Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete / As director by engineer incharge and BDG- 2 and 5 / As directed by Engineer- in-charge.
12 / Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete / Bd.L.4 Page No. 368
13 / Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. / Spec.No.: Bd.O.8/Page No.406
14 / Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kg/Smt. / Bd.F.11/Page Bd.W.6
15 / Providing and applying 2 coats of alluminium paint of approved make to new structural steel work in buildings and workshops including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat)etc. complete. / Bd.0.4 Page No. 405
16 / Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete. / BR.43 Page No. 138
17 / Providing and fixing informatory sign boaed in square or rectangular shape of any size made out 16 auge thick mild steel sheet paint with one coat od zinc chromatic stovering primer and
g two coats green stove enamel paint on front side and grey stove elamel on back side
and border/message symbols etc with cut out of Type IV ( High intensity micro prismatic grade sheeting) Type xi(Prismatic grade sheeting /3mm to 4 mm thick ACP sheetting supported
including M,S,angle frame of 35 mm x 35mm x3mm and two M.S.angle iron post
of size 65mm x65mm x6mm 3.65m lonh properly cross braced with angle iron of size 50mm x50 mm x5 mm duly painted with alternate black and white bands of 25 cm widht including G.I.
fixtures etc and fixing the bord in 1;4;8 concrete block of size 60 cmx60 cm x75cm including
transportation etc complete The nuy bolt of board with angle iron post/supporting structure after
fixing at site has to be written warranty of five years for Type iv/seven year for Type Xi from the manufacture& authorised distributor /convertor for satisfactory field retroreflectance of retroreflective sheeting performance durability & stipulated This
certificate in orignal should be submitted to the Engineer in chaarge by the contractor/supplier
18 / Providing sand faced plaster for external portion in cement mortar using Kharsalia / Kasaba or similar type of sand, in all positions including base coat of 15 mm. Thick in C.M. 1:4 using water proofing compound at 1 kg per cement bag, curing the same for not less than 3 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in C.M. 1:4 finishing the surface by taking out grains, making grooves and curing for fourteen days scaffolding etc. complete. / Bd.L.7 Page No. 369
19 / Royalty Charges
/ As directed by Engineer- in-charge

This Addendum is Part of Tender Documents.

Out Ward No. 6095 Dt. 19/12/2017

Executive Engineer Superintending Engineer

Public Works Division No 2 Public Works Circle,

Chandrapur Chandrapur