Product / Surface Resistivity /
Applications
/ Features
AG-800
Silver Conductive Ink
/ <0.015/ /
  • Flex circuits
  • Membrane switches
  • Additive circuits
  • EMI/RFI applications
  • Thermal targets
/
  • Good conductivity
  • High speed screen or pad printing
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance
  • Crease resistant

AG-500
Silver Conductive Ink
/ 0.02/ /
  • Used for EL panel bus bars on ITO
  • Touch screen bus bars
  • Difficult substrates
  • Flex circuits
  • Membrane switches
  • EMI/RFI shielding
/
  • Screen printable
  • Wets out well and has better adhesion on ITO substrates
  • High conductivity
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance

AG-755
Silver Conductive Ink
/ <0.008/ /
  • Flex circuits
  • Membrane switches
  • Additive circuits
/
  • For fine line printing
  • Screen printable
  • Highest conductivity
  • Higher viscocity, minimal slumping
  • Excellent adhesion to metals
  • Can be thinned for spray or dipping

AG-510

Silver Conductive Ink
/ <0.020 / /
  • Additive circuits
  • Printed heaters
  • PTF circuits
  • Defibrillator pads
  • EKG/EEG electrodes
  • Blood glucose sensors
  • EMI/RFI applications
  • EL panels
  • Membrane switches
/
  • Screen or pad printable
  • Fast drying
  • Highly conductive
  • Adheres to difficult substrates such as ITO or other metal oxides

AG-594
Silver Conductive Ink / <0.018 / /
  • Flex circuits
  • RFID & cell phone antennas
  • EEG/EKG/blood glucose disposable sensors
  • Additive circuits
  • EMI/RFI applications
/
  • High speed gravure or flexo printing
  • For extremely thin line printing
  • Excellent edge definition
  • Excellent adhesion to most metal
  • surfaces as well as polyester, polyimide
  • & polycarbonate films
  • Can be thinned

AGCL-675/675C
Silver/ Silver Chloride Inks / <0.035 / /
  • Defibrillator pads
  • EKG/EEG electrodes
/
  • Smooth or coarse surface finish
  • Screen or pad printable
  • Adjustable for gravure & flexographic printing
  • Blendable for specific resistance values

AGCL-823
Silver/Silver Chloride Ink / <0.020 / /
  • Defibrillator pads
  • EKG/EEG electrodes
/
  • One part epoxy adhesive ink
  • Crosslinked system
  • Screen or pad printable
  • Long working time, quick cure
  • Used for electrodes with aggressive gels

C-200
Carbon Resistive Ink / 50/ /
  • Membrane switches
  • Overprint for silver conductive traces
  • Flex circuits
  • Additive circuits
/
  • Vinyl based thermoplastic
  • Screen printable
  • Excellent adhesion to polyester & polyimide substrates
  • Not recommended on ITO
  • Can be blended with AG-800 for specific resistance values
  • Can be used as base electrode for EL panels

C-774
Carbon Ink / 30/ /
  • Membrane switches
  • Medical sensors
  • Heaters
  • Resistance pads
  • Overprint for silver conductive traces printed on polycarbonate substrate
/
  • Screen printable
  • For use on polyester, polyimide and polycarbonate substrates
  • Excellent adhesion to most metal surfaces
  • Fast dry time in low temperature oven
  • Rheology can be adjusted

EP-600
Two-Part Silver Epoxy / <1.0 x 10-3cm
volume resistivity /
  • Component or wire attachment
  • Filling via holes or spaces
/
  • Low temperature curing
  • Dot Dispensable
  • Fast cure
  • Suitable for flexible substrates

EP-900
Two-part Silver
Stencil Epoxy / <1.0 x 10-3cm
volume resistivity /
  • Component attachment & termination on hybrid circuits, membrane keypads & other assemblies
/
  • Two-part electrically conductive epoxy
  • For stencil printing processes
  • Low cure temperature
  • Excellent bond strength, temperature resistance and toughness
  • 6 month shelf life
  • Available in pre-measured CC-paks, bulk or syringes

EP-1100
One-part Silver
Conductive Epoxy / <5.0 x 10-4cm
volume resistivity /
  • Component attachment & termination on hybrid circuits, membrane keypads & other assemblies
/
  • One part epoxy
  • 30-day shelf life
  • Screen or stencil printing

EP-452
Two-part Thermally Conductive Adhesive/Potting Compound / 1 X 1013-cm
volume resistivity /
  • Potting thermocouples, thermistors and assemblies
  • Attaching components or assemblies to heat sinks
/
  • Two part component epoxy adhesive
  • High thermal conductivity
  • Electrically insulating
  • High temperature and solvent resistant

Sil-Con
Two-part Potting
Compound / <.06 -cm
volume resistivity /
  • Gasket sealing for EMI/RFI shielding
  • Flexible conductive interconnect between surfaces on touch screens & EL panels
/
  • Very flexible & strong two-part component
  • 100% solids
  • Electrically conductive
  • Temperature & solvent resistant
  • Easy removal for component repair or replacement

EP-837
Clear Epoxy Staking Adhesive / 1 X 1014-cm
volume resistivity /
  • Staking or anchoring
components or wires
  • Encapsulating components
/
  • Screen or pad printable
  • Low viscosity, 100% solids
  • Non-conductive
  • Dot dispensable
  • Available in clear or green color
  • Low temperature, fast curing

HTC-300

Hi-Temp Carbon Filled Ink

/ 100 / /
  • PTF circuits
  • Printed heater circuits
  • Printed rheostats
  • Flex circuits
  • Additive circuits
/
  • Used for higher temperatures
  • Tough, durable surface finish
  • Screen printable

HTC-350
Hi-Temp Carbon Filled Ink / 100/ /
  • PTF circuits
  • Printed Heater Circuits
  • Printed Rheostats
  • Flex circuits
  • Additive circuits
/
  • Crosslinked thermoset for even more solvent resistance and higher temperature stability than HTC-300
  • Tough, durable surface finish
  • Screen printable, especially for fine line/fine pitch
  • Excellent adhesion to polyester & polyimide surfaces
  • Can be blended with silver filled ink for specific resistance values
  • Additional baking time required

PTC-614
Carbon Heater Ink
/ <10K / /
  • Printed heater circuits
/
  • Screen or pad printable
  • Self regulating ink for heater
applications
RO-593
Radio Opaque Ink
/ 1014/ /
  • Visual reference for X-ray or
NMR /
  • Fast drying
  • Screen, gravure, flexographic
or pad printable
UV-3010
UV Encapsulant &
Conformal Coating / 1014/ /
  • Component encapsulation
  • Wire or component staking
/
  • Screen or pad printable
  • UV curable, 100% solids
  • Dot dispensable
  • Moisture resistant
  • Suitable for flexible substrates

UV-772
Fluorescing Ink/Coating / 2.9 x 1013/ /
  • Makers visible under UV light
/
  • Electrically insulating layer
  • Fluoresces under UV light to determine completeness of coverage

UV-1006S
Ultraviolet Curable Dielectric / 1014/ /
  • Printed insulation layers for
circuits
  • Busbar protection on EL & touch
screens /
  • UV curable, 100% solids
  • Touch, durable epoxy
  • Adheres to difficult substrates
such as ITO or other metal oxides
  • Screen or pad printable

UV-2530
Ultraviolet Curable Matte Dielectric / 1014/ /
  • PTF circuits
  • Printed insulation layers for
circuits /
  • Screen or pad printable
  • General purpose, matte finish
insulating material
  • UV curable, 100% solids
  • Available in clear, blue or green
colors
UV-2531
Ultraviolet Curable Glossy Dielectric / 5.0 x 1015/ /
  • PTF circuits
  • Flexible circuit substrates
  • Printed insulation layers for circuits
  • Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches
/
  • Glossy finish
  • Screen or pad printable
  • 100% solids
  • Available in clear, blue or green colors
  • Low odor

UV-2534
Ultraviolet Curable Glossy Dielectric / 5.0 x 1015/ /
  • Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches
  • Overprint layer for carbon/graphite shielding layers
/
  • Glossy finish
  • For difficult substrates, such as printed carbon inks
  • 100% solids
  • Screen printable
  • Moisture resistant
  • Available in clear, blue or green colors

WB-101
Water Based Silver Conductive Ink / <0.025/ /
  • RFID tags
  • Cell phone antennas
  • Medical EEG/EKG sensors
  • EMI/RFI shielding
/
  • Water based silver filled conductive ink
  • Gravure or rotary printable
  • Can be used to spray or coat
  • Low viscosity
  • High solids
  • Excellent for very thin film traces
  • Thermoplastic
  • Can crosslink for harder surface & stronger durability
  • Excellent adhesion to most substrates

Medical Products (above)(s:/website stuff/product chart)

Silver Inks
Product / Surface
Resistivity / Applications / Features
AG-800 / <0.015 / /
  • Flex circuits
  • Membrane switches
  • Additive circuits
  • EMI/RFI applications
  • Thermal targets
/
  • Good conductivity
  • High speed screen or pad printing
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance
  • Crease resistant

AG-500 / 0.02/ /
  • Used for EL panel bus bars on ITO
  • Touch screen bus bars
  • Difficult substrates
  • Flex circuits
  • Membrane switches
  • EMI/RFI shielding
/
  • Screen printable
  • Wets out well and has better adhesion on ITO substrates
  • High conductivity
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance

AG-510 / 0.015/ /
  • Membrane switches
  • Additive circuits
  • Printed Heaters
  • PTF Circuits
  • Defibrillator pads
  • EKG/EEG Electrodes
  • Blood glucose sensors
  • EMI/RFI applications
  • EL panels
/
  • Polyester binder
  • Screen or pad printable
  • Fast drying
  • High conductivity
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance

AG-755 / <0.008/ /
  • Flex circuits
  • Membrane switches
  • Additive circuits
/
  • For fine line printing
  • Screen printable
  • Highest conductivity
  • Higher viscocity, minimal slumping
  • Excellent adhesion to metals
  • Can be thinned for spray or dipping

AG-530 / 0.01/ /
  • Touch Screen Bus Bars
  • Used for EL panels in ITO
  • Additive circuits
/
  • Extremely flexible
  • Can blend with carbon to customize resistance
  • Excellent adhesion to polyester, polyimide, ITO, most textiles & porous substrates

AG-594 / <0.018/ /
  • Flex circuits
  • RFID & cell phone antennas
  • EEG/EKG/blood glucose disposable sensors
  • Additive circuits
  • EMI/RFI applications
/
  • High speed gravure or flexo printing
  • For extremely thin line printing
  • Excellent edge definition
  • Excellent adhesion to most metal surfaces as well as polyester, polyimide & polycarbonate films
  • Can be thinned

AG-610 / 0.050/ /
  • Circuit traces or jumper repair
  • High speed dip coating
/
  • Apply by syringe
  • Fast drying @ room or moderate temp
  • Thin for spray or dipping

WB-101 / <0.025/ /
  • RFID tags
  • Cell phone antennas
  • Medical EEG/EKG sensors
  • EMI/RFI shielding
/
  • Water based silver filled conductive ink
  • Gravure or rotary printable
  • Can be used to spray or coat
  • Low viscosity
  • High solids
  • Excellent for very thin film traces
  • Thermoplastic
  • Can crosslink for harder surface & stronger durability
  • Excellent adhesion to most substrates

Carbon Inks
Product / Surface
Resistivity / Applications / Features
C-200 / 50/ /
  • Membrane switches
  • Overprint for silver conductive traces
  • Flex circuits
  • Additive circuits
/
  • Vinyl based thermoplastic
  • Screen printable
  • Excellent adhesion to polyester & polyimide substrates
  • Not recommended on ITO
  • Can be blended with AG-800 for specific resistance values
  • Can be used as base electrode for EL panels

HTC-300 / 100/ /
  • PTF circuits
  • Printed Heater Circuits
  • Printed Rheostats
  • Flex circuits
  • Additive circuits
/
  • Thermoplastic
  • Used for higher temperatures
  • Tough, durable surface finish
  • Screen printable, especially for fine line/fine pitch
  • Excellent adhesion to polyester & polyimide surfaces
  • Can be blended with silver filled ink for specific resistance values

HTC-350 / 100/ /
  • PTF circuits
  • Printed Heater Circuits
  • Printed Rheostats
  • Flex circuits
  • Additive circuits
/
  • Crosslinked thermoset for even more solvent resistance and higher temperature stability than HTC-300
  • Tough, durable surface finish
  • Screen printable, especially for fine line/fine pitch
  • Excellent adhesion to polyester & polyimide surfaces
  • Can be blended with silver filled ink for specific resistance values
  • Additional baking time required

PTC-614 / <10/ /
  • Self -regulating printed heater circuits
/
  • Positive Thermal Coefficient Inks are self-regulating & powered with low DC voltage
  • Operate in temperature range of 60-70 degrees C without feedback loop
  • Screen printable
  • Print treated polyester or polyimide substrates
  • AG-800 or AG-510 silver ink recommended for bus bar

C-774 / 30/ /
  • Membrane switches
  • Medical sensors
  • Heaters
  • Resistance pads
  • Overprint for silver conductive traces printed on polycarbonate substrate
/
  • Screen printable
  • For use on polyester, polyimide and polycarbonate substrates
  • Excellent adhesion to most metal surfaces
  • Fast dry time in low temperature oven
  • Rheology can be adjusted

VRI Potentiometer Inks

Product / Surface
Resistivity / Applications / Features
VRI
Variable Resistance Carbon Ink / 1 – 100,000 / /
  • Rigid substrates such as FR-4, FR-3, ceramic, CEM-1, CEM-3 and other inorganic and organic material used for printed circuit assemblies
  • Potentiometers
  • Rheostats
  • Linear actuators
  • Wherever stable electrical resistance at higher temperatures is required.
/
  • Variable resistance carbon inks for blending to achieve specific resistance values
  • Electrically conductive
  • Screen printable
  • Outstanding abrasion resistance
  • Temperature resistant
  • Precise and stabile resistance over time

UV Curable Products
Product / Surface
Resistivity / Applications / Features
UV-2530 / 5.0 x 1015/ /
  • PTF circuits
  • Flexible circuit substrates
  • Printed insulation layers for circuits
  • Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches
/
  • Matte finish
  • Screen or pad printable
  • 100% solids
  • Available in clear, blue or green colors
  • Low odor

UV-2531 / 5.0 x 1015/ /
  • PTF circuits
  • Flexible circuit substrates
  • Printed insulation layers for circuits
  • Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches
/
  • Glossy finish
  • Screen or pad printable
  • 100% solids
  • Available in clear, blue or green colors
  • Low odor

UV-2534 / 5.0 x 1015/ /
  • Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches
  • Overprint layer for carbon/graphite shielding layers
/
  • Glossy finish
  • For difficult substrates, such as printed carbon inks
  • 100% solids
  • Screen printable
  • Moisture resistant
  • Available in clear, blue or green colors

UV-3010 / 3.8 x1014/ /
  • Component encapsulation
  • Printed circuit board protection
/
  • 100% solids
  • Dot dispensable
  • Moisture resistant
  • Suitable for flexible substrates
  • Can be sprayed or dipped

UV-1006S / 2.9 x1013/ /
  • Printed insulation layers for circuits
  • Touch screens
  • El panels
  • Flexible printed substrates
/
  • 100% solids
  • Adheres to difficult substrates such as ITO or other metal oxides
  • Screen or pad printable

UV-772 / 2.9 x 1013/ /
  • Makers visible under UV light
/
  • Electrically insulating layer
  • Fluoresces under UV light to determine completeness of coverage

(UV Phosphor binder- Not yet to be added)

Silver/Silver Chloride Inks/Epoxy

Product / Surface
Resistivity / Applications / Features
AGCL-675 / < 0.035/ /
  • EKG/EEG Electrodes
  • Defibrillator Pads
  • Biosensors
/
  • Screen printable ink
  • Smooth surface finish
  • Can be blended for different resistance values
  • Excellent adhesion & crease resistance to polyester, polyimide & other plastic substrates

AGCL-675C / < 0.025/ /
  • EKG/EEG Electrodes
  • Defibrillator Pads
  • Biosensors
/
  • Screen printable ink
  • Coarse surface finish
  • Can be blended for different resistance values
  • Excellent adhesion & crease resistance to polyester, polyimide & other plastic substrates

AGCL-823 / < 0.020/ /
  • EKG/EEG Electrodes
  • Defibrillator Pads
/
  • One-part electrically conductive thermoset epoxy
  • Screen printable
  • For use with especially aggressive gel materials
  • Excellent mechanical strength & toughness
  • High temperature and humidity resistance

Conductive Epoxies
Product / Volume
Resistivity / Applications / Features
EP-600 / <1.0 x 10-3cm /
  • Component or wire attachment
  • Filling via holes or spacers
/
  • Two-part electrically conductive epoxy
  • Dot dispensable
  • Low cure temperature
  • Fast curing
  • Suitable for flexible substrates
  • 6 month shelf life
  • Available in pre-measured CC-paks, bulk or syringes

EP-900 / <1.0 x 10-3cm /
  • Component attachment & termination on hybrid circuits, membrane keypads & other assemblies
/
  • Two-part electrically conductive epoxy
  • For stencil printing processes
  • Low cure temperature
  • Excellent bond strength, temperature resistance and toughness
  • 6 month shelf life
  • Available in pre-measured CC-paks, bulk or syringes

EP-1100 / <5.0 x 10-4cm /
  • Component attachment & termination on hybrid circuits, membrane keypads & other assemblies
/
  • One part epoxy
  • 30-day shelf life
  • Screen or stencil printing

Radio Opaque Ink
Product / Surface
Resistivity / Applications / Features
RO-593 / 2.9 x 1013/ /

Visual Reference for X-ray,

MRI & MMR /
  • Screen, gravure, flexographic or pad printable
  • Fast drying
  • Can apply by brush or syringe
  • Compatible with Parylene overcoats

Phosphor Binder Systems
Product / Surface
Resistivity / Applications / Features
PH-745 / 5.0 X 1015/ /
  • Mix with microencapsulated phosphor powder to produce pastes for EL panels
/
  • Clear binder to custom mix with commercially available phosphor powder as needed
  • Excellent flexibility, toughness & resistance to water & oxygen
  • Outstanding adhesion to ITO surfaces

Conductive Coatings
Product / Surface
Resistivity / Applications / Features
Antistat-268 / <10,000/ /
  • Coating for paper, cardboard, wood and most plastic substrates
  • Saturant for urethane foam
/
  • Water based antistatic coating or saturant
  • Can be dipped, roll coated or sprayed
  • Can be crosslinked for increased hardness & durability

C-808 / <50/ /
  • Coating for paper, cardboard, wood and most plastic substrates
  • Saturant for urethane foam
/
  • More conductive version of Antistat-268

WB-101 / <.025/ /
  • RFID
  • Cell phone antennas
  • Medical EEG& EKG
  • EMI/RFI shielding
/
  • Gravure or high speed processes
  • Suitable for spray or coating
  • Low viscosity, high solids silver ink
  • Electrically conductive
  • Can be cross linked

Potting Compounds
Product / Volume
Resistivity / Applications / Features
Sil-Con / <.06 -cm /
  • Gasket sealing for EMI/RFI shielding
  • Flexible conductive interconnect between surfaces on touch screens & EL panels
/
  • Very flexible & strong two-part component
  • 100% solids
  • Electrically conductive
  • Temperature & solvent resistant
  • Easy removal for component repair or replacement

EP-837 / 1 X 1014-cm /
  • Staking or anchoring components or wires
  • Encapsulating components
/
  • Low viscosity, 100% solids
  • Non-conductive
  • Dot dispensable
  • Available in clear or green color
  • Low temperature, fast curing

EP-452 / 1 X 1013-cm /
  • Potting thermocouples, thermistors and assemblies
  • Attaching components or assemblies to heat sinks
/
  • Two part component epoxy adhesive
  • High thermal conductivity
  • Electrically insulating
  • High temperature and solvent resistant

EP-799 / 1.0 X 1014-cm /
  • Potting components or assemblies
  • Protection against moisture
  • Protection against thermal or mechanical shock
/
  • Excellent moisture resistance
  • Excellent toughness and flexibility
  • Fast curing
  • Excellent mechanical properties and heat resistance

Dielectric Inks

Product / Volume
Resistivity / Applications / Features
BT-101 / >1 X 1014-cm /
  • Capacitance layer between
phosphor and back electrodes for EL lamps on polyester or ITO substrates /
  • High dielectric constant
  • Barium titanate based dielectric ink
  • Electrically insulating
  • Screen printable
  • Very moisture resistant
  • Can be crosslinked
  • Produces mirror smooth surface finish

Specialty Inks

Specialty 7(no data sheets, but one platinum pattern photo with generic description) COPY- emailed to Gary 2/10/10 see below

Specialty Inks & Coatings

New applications sometimes require something other than standard off-the-shelf materials. New and emerging technologies, harsh environmental conditions, mechanical and thermal stress, compatibility between materials and substrates, extreme temperaturecycling and unique manufacturing processes and conditions are all circumstances that may require specialty materials. Conductive Compounds, Inc.formulates customized inks and coatingsutilizing a wide variety of polymer binders and metal components such as gold, platinum, rhodium, nickeland tungsten.We take great pride inproviding our customers with products that are tailored to their unique requirements