New Holland Construction will launch new short radius excavator models at Bauma 2013
New Holland completes its new crawler excavator range with the introduction three short radius models, the E230C SR, E260C SR and E160C Blade Runner. Featuring New Holland’s Tier 4 interim CEGR technology and unique iNDr system, these quiet short radius models combine productivity with the ability to work in the tightest spaces, making them ideal for urban job sites and road construction work:
o More fuel savings and productivity with the high-efficiency hydraulics, up to 8% higher swing torque and new ECO working mode
o Ultra quiet operation with the unique iNDr cooling system: just 95dB(A) ambient noise and 65 dB(A) inside the cab
o More comfort and all round visibility with the new EVO cab
o Built-in reliability and durability with reinforced boom and easy serviceability
o Extreme versatility of the E160C BR with 6-way dozing capability
Big performance in a compact package
The new E230C SR and E260C SR run a 166 hp engine, up 9 hp from the B Series models they replace, while the E160C BR mounts a 99 hp engine. All three models meet Tier 4 interim emissions standards with New Holland’s Cooled Exhaust Gas Recirculation (CEGR) technology and a Diesel Particulate Filter (DPF).
The combination of highly advanced electronic technology and a sophisticated hydraulic system maximises the machines’ performance, adapting it to the task being performed. The upgraded Advanced Electronic Processor (A.E.P.) offers a new ECO working mode to optimise fuel consumption while maintaining the best performance. The new multifunction monitor puts the operator in full control of the machines’ efficiency, providing information of hourly fuel consumption and promoting fuel savings by indicating when the machine is working most efficiently. The new E260C SR delivers impressive swing torque, 8% higher compared to its predecessor.
The compact size and short radius design enable these machines to deliver their best productivity even in confined spaces. They are also easy to transport, with a positive impact on operating costs.
Ultra quiet operation for the urban jobsite and operator comfort
The three models feature New Holland’s revolutionary Integrated Noise and Dust Reduction (iNDr) cooling system, which minimises noise, optimises cooling and maximises particulate filtration. It manages efficiently the incoming and outgoing airflow, directing the extracted air up and away from the excavator, so that the machines run cleaner, quieter and more efficiently. The excellent filtration and efficient cooling mean that the engine performs better. In addition, ambient noise levels are dramatically reduced to just 95 dB(A.
EVO Comfort and safety
The ROPS and FOPS compliant EVO cab provides the operator with excellent all round visibility, improved with the full size right window and standard rear-view camera. The iNDr system combined with dampers and enhanced soundproofing result in only 65 DB(A) of internal noise – by far the best on the market.
Built-in reliability and durability
The three models feature reinforced booms for added durability. The E160C BR’s blade, the heavy-duty lift cylinders, thick boxed-frame beam supports and protected lines and grease fittings are fully integrated into the excavator’s design, providing extra protection and strength. The standard heavy-duty curved shoes maximise the E160C BR’s reliability and durability while providing excellent turning capability and weight distribution. Uptime is maximised by the easy serviceability provided by all main service points being accessible at ground level.
E160C Blade Runner: two machines in one
The E160C BR provides unequalled versatility by integrating excavator and dozer technologies into a single machine. In addition to powerful digging and fine grading capabilities, the new BLADE RUNNER offers a standard 6-way dozer blade and foldable, lockable blade wings that extend the clearing path beyond the width of the tracks. The blade has Power, Angle and Tilt (PAT) capabilities operated from the cab with a single lever. The blade can be angled 25 degrees left and right, dispersing earth and materials away from the machine’s path. It also tilts up on both sides for slope grading, culverts and ditches. The 445 mm maximum lift height provides ample clearance when loading for transport or hill climbing.
E230C SR Fact Box
Operating weight (Mono boom and blade): 23600 kg
Net flywheel power: 124 kW / 166 hp
Tier4 Interim emissions technology: CEGR + DPF
External guaranteed sound level: LwA 95 dB(A)
E260C SR Fact Box
Operating weight (2-Piece boom and blade): 26600 kg
Net flywheel power: 124 kW / 166 hp
Tier4 Interim emissions technology: CEGR + DPF
External guaranteed sound level: LwA 95 dB(A)
E160C Blade Runner Fact Box
Operating weight (Mono boom and 6-ways blade): 16200 kg
Net flywheel power: 74 kW / 99 hp
Tier4 Interim emissions technology: CEGR + DPF
External guaranteed sound level: LwA 95 dB(A)
Turin, 29 January 2013
Visiting our website, you will be able to download texts, high-resolution image files and videos related to this press release (jpg 300 dpi, CMYK): www.newholland-tools.com/press-kit
New Holland Construction is a global, full-line construction equipment brand, with a network of 800 dealers and more than 2,100 outlets in 100 countries. The company brings together the strength and resources of its worldwide commercial, industrial and finance organizations. Thanks to the experience of its foundation heritage brands, New Holland can proudly point to quality, technologically state-of-the-art products that are fully compliant with safety standards and environmental regulations. New Holland Construction is a brand of CNH Global N.V., a majority-owned subsidiary of Fiat Industrial S.p.A. (FI.MI). More information can be found on line at www.newholland.com.
Press Office
Released by:
TLC PR for ALARCON & HARRIS
Lynn Campbell
Tel: +44 151 227 4957
E-mail: