Course Management Training Workbook

Course Management training workbook

UUN: EUCTRN44

Password:

These exercises will show you how to create a structure (where none already exist) for a course in SMART.

Course Structures are not applicable to courses that are Pass/Fail.

Step 1 – Access SMART

Using the login details on the front page, log into the TEST version of SMART. There should be a browser window at the EASE login screen on the PC in front of you.

Click the Login to SMART button.

The SMART homepage should appear. If not, consult the trainer.

The dropdown at the very top (currently at “Home”) can be used to navigate to the different SMART modules. Alternatively, on the Homepage you can click the appropriate button on the left-hand side.

For this workbookwe will be using the test courses available in SMART.

SMART gives each user 2 Test courses to experiment with. They are named ‘T1_[your uun]’, i.e. ‘T1_jsmith’.
Look at the course list dropdown at the top right of the screen; it should show T1_euctrn40(TEST-1-euctrn40).

This located in the top right hand corner of the SMART screen in the course drop down menu.

Make sure T1_EUCTRN….. is selected from the drop down menu.

EXERCISE 1 – Create a Coursework and an Exam component - Page 5-17

The module we will be using is Course Management.
Either using the button on the Homepage, or the option in the dropdown, select Course management. The SMART screen will update. It will now look like this:

If your screen looks different, consult the trainer.

Note that Main Structure is default in our drop down menu and is the only selection to be used from this drop down menu.
Each coursemay consist ofeitheraCoursework component, anExam component, orboth.
Each of these may have 10sub-components(i.e. exam questions or essays). Each sub-component may have 10 of its ownsub-components.

We will nowcreate a Coursework component.

On the line that says “This course structure has no coursework component”,

click the blue Click here to add onelink.

A blank component will now appear

The mark scheme is currently incomplete: we will edit it in a moment.
We will now create an Exam component.
On the line that says “This course structure has no exam component”,
click the blue Click here to add one link.

A blank component will now appear:

Edit marking scheme and add sub-components.

We can use the dropdowns on the right to create further sub-components or set up the mark scheme. These look like this:

On the Coursework component,
go into the dropdown and select Edit marking scheme.

The below coursework information will appear:

We will leave the top dropdown as it is as marks will be recorded for this course
For this course, we will also leave the 2 bottom dropdowns (to record submission and attendance) as they are (i.e. this course will not store submission or attendance data).

Let us now specify what percentage the Coursework counts for in relation to the whole course structure.

In the box after “count for”, replace the default value of 0 with 50.

This will nowmake the Coursework count for 50% of the overall course.

Tick the confirm action box
press the Edit marking scheme button.

The screen should now look like this:

Now we will edit the marking scheme for the Exam.

On the Exam component,

go into the dropdown
selectEdit marking scheme.

As with the Coursework option, we will leave all the dropdowns as they are.
We will also leave the “marked out of” box.
Enter 50 in the box after “count for”.

Tick the confirm action box
press the Edit marking scheme button.

The screen will now look like this:

Now we will create sub-components for the Coursework

On the Courseworkcomponent,
go into the dropdown and select Add a sub-component.

The Coursework component will now look like this:

In the acronym box, type E1S1.
In the full name box, type Essay 1 semester 1.

Tick the confirm action box
press the Add this component button.

Beside ESSAY 1 SEMESTER 1 select Edit Marking Scheme from drop down menu.

In the box after “are marked out of”, type 35.
In the box after “count for”, type 50.

Tick the confirm action box
press the Edit Marking Scheme button.

From the Coursework component select Add sub-component from the drop down menu.

In the acronym box, type E1S2.
In the full name box, type Essay 1 semester2.

Now beside ESSAY 1 SEMESTER 2 select Edit Marking Scheme from drop down menu.

In the box after “are marked out of”, type 35.
In the box after “count for”, type 50.

Tick the confirm action box
press the Edit Marking Schemebutton.

On the Coursework component,
go into the dropdown and select Edit marking scheme.

From the drop down menu select all
Depending on the worth of the sub-components you will have the option to select “All” or the best of

Tick the confirm action box
press the EDIt Marking Scheme button.

Example if you have 10 sub components worth 20% each you can select best 5 of 10

5 x 20% = 100%. Thus 100% of your Coursework component would be represented.

In this case, the coursework component will now look like this.

Now we will create sub-components for the Exam.

On the Exam component,
go into the dropdown and select Add a sub-component.

The Exam component will now look like this:

In the acronym box, type Q1.
In the full name box, type Question 1.
Tick the confirm action box
press the Add this component button.

The screen will now look like this:

The marking scheme for Question 1 now needs to be set up.

In the row for the Q1 sub-component
go into the choose an option dropdown
selectEdit marking scheme.

SMART will now refresh with the option to update Question 1. See next page.

In the box after “are marked out of”, type 10.
In the box after “count for”, type 25.

Tick the confirm action box and press the Edit marking scheme button. The Exam component will now look like this:

The text “Accepting all marks from immediate end-level components “ in the EXAM sectionmeans that because we have created sub-components, there are no recordable marks from the top-level Exam component.

We will now add a second sub-component to the Exam.

On the Exam component
go into the dropdown
selectAdd a sub-component.

As before, the screen will show this box:

In the acronym box, type Q2.
In the full name box, type Question 2.
Tick the confirm action box
press the Add this component button.

We now need to set up the mark scheme for Question 2.

In the row for the Q2 sub-component
go into the choose an option dropdown
selectEdit marking scheme.

In the box after “are marked out of”, type 10.
In the box after “count for”, type 25.

Tick the confirm action box
press the Edit marking scheme button.

The screen will now look like this:

We now have 2 exam questions, each marked out of 10, and each making up 25% of the Exam Component.
We have an Exam and a Coursework component, each comprising 50% of the entire course.

When using SMART, if any of these combinations don’t add up to 100% for a particular level of component, a warning message will be displayed once test data has been run against it. This is done in the test structure tool which we will look at later in the class.

Now create a sub-component Question 3 and sub-component Question 4

On the Exam component
go into the dropdown
selectAdd a sub-component.

In the acronym box, type Q3.
In the full name box, type Question 3.
Tick the confirm action box
press the Add this component button.

In the row for the Q3 sub-component
go into the choose an option dropdown
selectEdit marking scheme.
In the box after “are marked out of”, type 10.
In the box after “count for”, type 25.
Tick the confirm action box
press the Edit marking scheme button.

Repeat for Question 4

On the Exam component

go into the dropdown
selectAdd a sub-component.

In the acronym box, type Q4.
In the full name box, type Question 4.
Tick the confirm action box
press the Add this component button.

In the row for the Q4 sub-component
go into the choose an option dropdown
selectEdit marking scheme.
In the box after “are marked out of”, type 10.
In the box after “count for”, type 25.
Tick the confirm action box
press the Edit marking scheme button.

On the Coursework component,

Beside the EXAM component
go into the dropdown and select Edit marking scheme.

We will now set the best of drop down menu to all

From the drop down menu select all

Tick the confirm action box
press the EDIT Marking Scheme button.

We have now added up our sub-components/Question in our EXAM to 100%

Well done! You have created a basic Course Structure.

End of Exercise 1.

Please stop here.

EXERCISE 2: Course Management- Page 18-19

Amend sub components and Edit marking scheme.

On the Coursework component Select Edit mark scheme from the drop down menu

Amend the counts for to 40

Tick the confirm action box
press the Edit marking scheme button.

On the EXAM component Select Edit mark scheme from the drop down menu

Amend the counts for to 60

Tick the confirm action box
press the Edit marking scheme button.

For each Exam sub-component/Question perform the following steps.

selectEdit marking schemefrom drop down menu.
In the box after “are marked out of”, type 10.
In the box after “count for”, type 50.
Tick the confirm action box
press the Edit marking scheme button.

Beside the EXAM component
go into the dropdown and select Edit marking scheme.

We will now set the best of drop down menu to all

From the drop down menu select BEST 2 of 4

Tick the confirm action box
press the EDIT Marking Scheme button.

Congratulations you have successfully amended the marking scheme for your course exam.

End of exercise 2.

Please stop here.

EXERCISE 3 - Edit component description – Page 20-23

If you wish to later editthe component acronymor nameyou entered,

Essay 1 semester 1click on the Edit component description from the item’s drop-down menu.

Enter the new acronym as EJ1
Enter Essay subcomponent name as Essay on Jon 1
tick confirm action
click Edit this component description

Move component Up/Down

This option is found in the drop-down menus to the right of each component.

It allows you to reorder the components within the course structure by moving them up or down the components list.

Any sub-components within a component are moved along with the component.

Select the drop down menu beside Question 3.

Select Move component up

NOTEthat if a component is at the top, then only “move component down” will appear in the list;

likewise if the component is at the bottom, then only “move component up” will appear.

“Moving” is purely aesthetic and is useful if components were created out of sequence, i.e. Practical 1, Practical 3, Practical 2.

Fig 34: Moving a component

tick the confirm action checkbox
click the move this component upbutton.

Delete component

This option can be found in the drop-down menus to the right of each component.

Question 4 select Delete component.
It will delete a component/sub-component.

However, care should be taken if students are enrolled on the course, because deleting a component will delete any sub-component of it too, and all related marks. If you select this option, a message will appear to that effect (fig 33).

If you select this option AND tick the check box AND click “Delete this component” when you did not want to delete it, it is too late. The deletion is final and SMART Support cannot help you.

Fig 33: delete a component: are you really sure you want to go ahead?

tick the confirm action checkbox

Click Delete this component to delete question 4.

You will be returned to main course structure screen.

Now select edit marking schemebeside EXAM
SelectBest of 3

Notice SMARThas automatically amended the marking scheme regarding the best of numbers, now best of 3 rather than best of 4.

Show/Hide all marking scheme

This dropdown option is at the top, right-hand side of the Main Structure menu (fig 37).

It lets you toggle between showing the full structure (with the total course is marked out of, how much of the course each component counts for, etc.) and just the basic components.

select “Hide all marking scheme” from down menu.
The layout will now look like below.

Please stop here.

EXERCISE 4 – Student records – Page 24-32

Student Records

There are two functions in this module:

View a detailed record for a single student
View and Generate printable lists of students

Detailed record for a single student

Use the navigation drop down menu and selectStudent records

Then select from the following drop down menuDetailed record for a single student.

The dropdown menu (fig 19) lets you enter your search criteria in 4 different ways.

SelectTypedMatriculation Numberfrom the drop down list.

Fig 19: ‘Detailed record for a single student’ dropdown

Searching by exam or matric number or surname, you will need to click Do search.
If you search using the matriculation number just enter the numerical part, not the leading “S”.
Enter in matric number 1005016
Click “Do search”

The student’s identification details - name, exam and matric numbers – appear at the top of the grey box.

To the right is a start a new search button.

Fig 21: Student data

At the top of the screen are the programme and year of programme.

There is also an option to email the student’s University email account: clicking it will open your default mail program to send a message to the student.

The enrolment data comes from the University’s central student record system, EUCLID, and is updated every night.

For current enrolments, you can edit the following data:

Status
Study method
Honours calculation
Groups (for practical’s and tutorials)
Add Notes

Click the blue edit button at the end of the top course.

That course will then open up, allowing you to make the changes (fig 22).

Fig 22: Course enrolment edit screen

Changes here are unnecessary at present. The process of saving is as before:

click the confirm action tick box and click Edit enrolment record.
Cancel will take you back to the course enrolment display screen.
The Notes field also displays in the Course Results module.

Editing data within individual student course enrolments is not recommended and unlikely to be needed.

The only occasions might be when a student retaking a course in further years is registered “E – exam only” and you need to change this to “CE – coursework and exams” in order to enter marks for components of the course already passed in a previous year. This edit within SMART is not transmitted to EUCLID.

Archived enrolments

Click the start new search button
From drop down menuselect Typed Matriculation Number
Enter matric number - 1005016
Click do search
Scrolled down to archived enrolments

(previous years), you can select whether or not a particular course counts towards the student’s Honours calculation, by clicking the blue edit button under Hons calc.

Simply clicking the button is enough to change the value from Yes to No or vice-versa.

It is not recommended that the edit facility in archived enrolments be used.

Information on searching options

If searching by surname, no wildcards are needed: typing “smi” (without the inverted commas) will return a list of all students for whom these letters appear in sequence.

If your search returned no results, a message will appear to that effect, with a Start a new search button.

If your search returned more than one result, you will see a message: Your search for a surname containing string nnn returned many results [where nnn is the surname or partial surname you entered].

There will be a dropdown box with a list of students whose surname contains the letters you typed (fig 20).

Searching by surname is not recommended as it will bring up a list of all students within the University with that surname.