Jansen Brandschutz
Stacking door MATADOOR T30/EI30
- Exceptional dimensions through unlimited possibilities in height and width.
- Usable multifunctionally as permanent functional door.
- Convinces because of its attractive price-performance ratio.
- Installation of recess shutters in the lintel area and ceiling area possible.
Door leaf:
The door leaf consists of elements with variable heights. The separate elements are joined to a door leaf stack by a special linking system. The thickness of the elements is 32 mm. The door thickness depends on the number of elements. The surface is flush and consists of zinc-coated 0.75 mm thick steel sheets. The steel sheets and the fire protection filling are caulked all over.
Means of support:
As means of support (number dependent on door size) straps are employed. The drive shaft takes over the guidance of the straps.
Control & drive:
A specially coordinated drive and control system (microprocessor steered lock system) which has been approved by building control is employed. Application as permanent functional door can be avouched. Due to miscellaneous independently adjustable parameters in the control our door systems can be run like standard industrial doors (see supplementary equipment). Due to battery buffering the door will be held in its current position for at least four hours in case of a power outage. The control as well as all other safety devices continue to be active in case of fire. With floating contacts a scan of the operating state of the door is possible. The connection of a building fire detection system can be realized through existing interfaces.
Supplementary equipment:
Surface coating: Primer, colouring according to RAL, DB or NCS
Electrical options:Impulse control, time closing, miscellaneous monitoring of closing area
Control elements: Key-operated push button, pull switch, IR-/radar motion sensor, radio, induction loop, under-glass release button
Recess shutters: Vertical (180ohinged, up to a width of 1000 mm) and horizontal (90ohinged)
Safety equipment:Flash light, light barrier
Verified according to:
DIN EN 1634-1.