Arctic Chiller Group Training Programs

The Arctic Chiller Group is proud to provide a training course for technicians with the necessary skills to maintain and trouble-shoot the Arctic Chiller Systems. This 3-day course covers the latest in DanfossTurbocorcompressor technology, monitoring software, controllers, and Arctic Chiller systems.

COURSE DESCRIPTION

Maintenance Training – Service Providers

This course is for the service contractor who will maintain and troubleshoot the equipment.

Course Outline

  • Arctic Group Chillers
  • Key features of air-cooled chillers, water-cooled chillers, and compressors
  • Turbocor Compressor
  • Detailed schematic of major components
  • Methods of controlling the compressor
  • Troubleshooting and maintenance
  • Turbocor Software
  • Chiller Controls
  • Commissioning, general maintenance, warranty procedures
  • Factory tour at our head office in Brampton, ON

Compentencies Achieved

  • Turbocor compressors
  • TT300-TT500 components and troubleshooting
  • Turbocor monitoring software
  • Arctic Chiller controllers
  • Set up and adjustments
  • Sporlan expansion valves
  • Expansion valve controller set up and adjustments

This course is designed for the individual technician to carry out maintenance of the chiller systems outside of the warranty period, service, and troubleshoot the Arctic Chiller Group chiller systems. This certification is valid for a period of 2 years. A refresher course may be necessary to gain knowledge on new innovative designs and technology unless otherwise stated.

Duration

21 hours over 3 days (9:00 am to 4:00 pm)

Cost

$ 2,500.00 per person

Price includes:DanfossTurbocor software

Current manuals in electronic format and hard copy

DanfossTurbocor DC Power Test for the compressor

Pocket Guide for troubleshooting

Hotel stay – 3 nightspaid, breakfast included (Room & Tax only)

Lunch for 3 days

Dinner for 2 nights

Shuttle service to our Head Office in the morning

**Cost is based on a maximum-sized class of 10 participants only. Payment must be made in full at least 1week prior to the class start date.

Application forms are available below. Please complete and submit the online form as follows:

Mr. Justin

-or-

Rozi Rudar

-or-

Fax to the attention of Rozi Rudar at 905-789-9945

Scheduled Training Classes

The following dates have been tentatively scheduled for the technical training classes and are subject to change. Prior to booking flight reservations, please wait for your confirmation.

Arctic Cool Chillers Limited reserves the right to cancel or re-schedule classes as deemed necessary. All confirmed participants will be notified 2 weeks prior to course.

Date / Location / Availability
January 25th-27th / Brampton, ON / 10 spaces
February 22nd-24th / Brampton, ON / 10 spaces
March 29th- March 31st / Brampton, ON / 10 spaces
April 26th-28th / Brampton, ON / 10 spaces
May 24th-26th / Brampton, ON / 10 spaces
September 27th-29th / Brampton, ON / 10 spaces
October 25th-27th / Brampton, ON / 10 spaces
November 29th- Dec 1st / Brampton, ON / 10 spaces

Technical Training

Summary

The Arctic Chiller Technical Training course is designed to train technicians with the necessary skills to maintain and troubleshoot Arctic Chiller products. The 3-day course that starts at 9:00 am covers topics such as the DanfossTurbocor compressor technology, and Danfoss and Schneider controllers. Lunch will be served and training will resume thereafter, until approximately 4:00 pm.

Upon successful completion of this course, the certified technician will be authorized to maintain and troubleshoot the Arctic Cool Chiller systems. However, this course does not allow certified technicians to become certified trainers for the Arctic Cool Chiller systems or DanfossTurbocor systems. The certification will remain in effect for a period of 2 years upon successful completion of the training course. Arctic Chiller Group reserves the right to require additional courses or refresher training in order for the certification to remain valid.

Arctic Chiller Group reserves the right to enroll applicants for any training course and the right to reject applicants or refuse certification, at its sole discretion, if the pre-requisites are not met and to the satisfaction of administrators.

Location

Arctic Cool Chillers Limited

2100 Steeles Avenue East

Brampton, ON

L6T 1A7

Canada

Phone: 905-789-9988

Fax: 905-789-9945

Cost

$ 2,500.00 per person.

HST is extra where applicable.

Hotel stay(3 nights included – Room & Taxes only) in Brampton, ON. Breakfast is included for each day. Rooms will be booked by Rozi Rudar and confirmation numbers will be forwarded to each participant.

Lunch will be provided each day.

2 complimentary dinners will be provided.

Shuttle service will be provided in the morning from the hotel to our Head Office.

Airline tickets and taxi/car rental costs will be at the expense of the participant and should not be pre-booked until authorization is granted for participating in the training course.

Cancellation Policy

Arctic Chiller Group reserves the right to cancel a scheduled training course and re-schedule a training course if enrollment is insufficient a minimum of 2 weeks prior to the scheduled course date. Please confirm scheduling prior to making any travel arrangements.

Pre-requisites

  • Previous accreditation in HVAC/R or minimum field experience
  • Documented Education (1 of the following)

Engineering Degree

Associates Degree

Certificate

Trade Certificate

  • 5 years minimum experience with Centrifugal chillers
  • Adequate Computer Skills
  • Familiar with Microsoft Windows
  • Familiar with Microsoft Office
  • Ability to copy/paste files/folders
  • Ability to open, create, and save files
  • Ability to capture screen shots
  • Ability to download and install software
  • Familiar with basic multi-meter functions
  • Measuring resistance(Ω)
  • Measuring voltage (V)
  • Measuring amperage (A)
  • Measuring milli-amperage (mA)
  • Measuring continuity (…)
  • Measuring diodes
  • Measuring capacities
  • Laptop Computer
  • Windows XP/Vista 32 bit Operating System or Windows 7
  • Adobe Reader
  • Microsoft Word
  • Microsoft Excel
  • Portable wireless internet access
  • English Language
  • Spoken
  • Written

Preferences

  • Ability to read P&ID documents
  • Previous electrical training
  • Previous centrifugal chiller experience
  • Previous VFD experience
  • Previous controls experience

Course Outline

Day 1

  • Company Overview/Technology History
  • DTC Compressor
  • Compressor overview and key features
  • Discussion on centrifugal compressors
  • Compressor in-depth
  • Compressor operation

Day 2

  • Controller review
  • Controller set up
  • Controller trouble shooting
  • Software installation
  • Chiller component review
  • Field Server set up & operation

Day 3

  • DTC Service Monitoring Tool (SMT) installation
  • STC SMT overview
  • Compressor troubleshooting
  • Technical literature familiarization
  • Arctic Cool Chiller forms and procedures

Enrollment Form

Contractor
Company Name
Contact Name
Address
City
Province/State
Postal Code/Zip Code
Office Phone Number
Office Fax Number
Applicant
Name
Title
Cell No.
email
Course Pre-requisites per Applicant
Education
No. of years experience with centrifugal chillers
Computer Literate? / Yes No
Familiar with basic multi-meter functions? / Yes No
Do you have the laptop computer pre-requisites? / Yes No
Training dates preference
Purchase Order Number
Method of Payment
Office Use Only
Training Date Session
Pre-requisites confirmed
Confirmed to client via:
Payment received