project specification

Date
Sales responsible
Project name/reference

Crane dimensions

Crane Type
/ Full gantry crane / Semi gantry crane
/ Single girder, low / Single girder, normal
Double girder
Crane span, m
Height of lift, m
Rope reeving / Standard / True vertical
Girder data
/ Height, mm / Width, mm / Weight, kg
Fixed leg data / Height, m / Weight, kg
Hinged leg data / Height, m / Weight, kg
Height of crane structure, mm
Height to upper rail, mm
Max. Dynamic Wheel Load, kN / Without Wind kN / With Wind kN
Runway / Type of rail / Length, mm
Crane service platform / Yes / No
Hoist service platform / One sided / Two sided
Crane lay out
/ Sketch included

Load and duty

Load, kg / Crane / Hoist 1 / Hoist 2
Duty classes / Crane / Hoist / Br Travel

SPEEDS

Value (m/min) / 2-speed / Inverter / Default
Hoist 1 hoisting
Hoist 2 hoisting
Trolley 1 travel / 20 ¤ 5
Trolley 1 travel / 20 ¤ 5
Crane travel / 32 ¤ 8

ELECTRICS

Main voltage, V / Control voltage, V / Frequency, Hz
Control device / Pendant / Remote control / Other:
Crane power supply / Flat cable / Rail / Cable reel

environment

Location
/ Indoor / Outdoor / Special:
Wind speed, m/s
/ Case I / Case III
Special environment / Temperature / Altitude, m

SPECIAL GANTRY COMPONENTS

Gantry type gear for EC20…EC50:
GES4G/GES5G / Yes / No
Gear cover for Gantry gear (***) / Yes / No
Gantry components for end carriages:
Gantry joint plates (C6/C7/C8/C9) / Yes / No
Guide rollers for EC20…EC50 (+) / Yes / No
Rail sweeps (++) / Yes / No
Safety wire (++) / Yes / No
Derailment catch (+++) / Yes / No
Mechanical storm locking device (++++) / Yes / No
Electrical storm locking device (++++) / Yes / No
PU coated rail wheels (*+) / Yes / No
ACS Anti Collision Sensor / Yes / No
Horn / Yes / No
Flashing beacon / Yes / No

(***) Recommended if Gantry type gears chosen, protects both gear and motor

(+) Needed for SemiGantry upper end, if no flanges on lower wheels

(++) For SemiGantry lower end and full Gantry both ends

(+++) For SemiGantry upper end, 2 pcs/end carriage

(++++) Holding force max 180 kN, recommended 1 pcs/end carriage

(*+) Wheel load highly limited, check wheel capacity

ADDITIONAL INFORMATION / SPECIAL FEATURES

Location of bridge panel / A
B
C
D
Location of bridge panel / A
B
C