PURCHASE ENQUIRY NO. M335F005/1 07/07/2015
Dear sir,
------
Slno Item Description Quantity Unit
------
1. DC2D8510006C5A6 PR-Slno: 1 Value: 510 K Ohms iss-no:1
Dt.281210
RESISTOR SMD, 510 K Ohms, 5%, 1/8 W, 200 PPM,
SIZE 1206 12000 NO
Delivery:- Jul.2015- Full
S0182 SMEC, INC USA sts : *DCR
Type : RC73L2B514JT
2. DC2D8511004C4A3 PR-Slno: 2 Value: 5.11 K Ohms iss-no:1
Dt.230711
RESISTOR, 5.11K, 1%, 100 PPM, SMD 1/8W, SIZE :
0805 7000 NO
Delivery:- Jul.2015- Full
S0182 SMEC, INC USA sts : *DCR
Type : RC73A2D5111FT/F
3. DC2D8560003C4A6 PR-Slno: 4 Value: 560 Ohms iss-no:1
Dt.230711
RESISTOR, 560 Ohms, 5%S, 200 PPM, SMD 1/8W,
SIZE : 0805 10000 NO
Delivery:- Jul.2015- Full
S0182 SMEC, INC USA sts : *DCR
Type : RC73L2D561JT/F
4. DC2D8560004C4A6 PR-Slno: 5 Value: 5.60 K Ohms iss-no:1
Dt.230108
RESISTOR,SMD, 5.6K, 5%, 1/8W, 100PPM SIZE 0805 5000 NO
Delivery:- Jul.2015- Full
W0021 WALSIN TECHNOLOGY CO TAIWAN, R.O.C sts : *DCR
Type : WR08X562-JTR
------
Contd..
Page No. 2
ENQ NO. M335F005/1 07/07/2015
------
Slno Item Description Quantity Unit
------
5. DC2D8560006C4A3 PR-Slno: 6 Value: 560 K Ohms iss-no:1
Dt.230108
RESISTOR,SMD, 560K, 1%, 1/8W, 100PPM SIZE 0805 2500 NO
Delivery:- Jul.2015- Full
W0021 WALSIN TECHNOLOGY CO TAIWAN, R.O.C sts : *DCR
Type : WR08X5603FTR
6. DC2D8562004C4A6 PR-Slno: 7 Value: 5.62 K Ohms iss-no:317
Chip resistor, 5.62 K ohm, 1/8 w, 5%, 200 ppm, 0805
= Delivery:- Jul.2015- Full
Delivery:- Jul.2015- Full
S0182 SMEC, INC USA sts : *DCR
Type : RC73L2D5621JTF
7. DC2D8590004C4A3 PR-Slno: 8 Value: 5.90 K Ohms iss-no:1
Dt.120410
RESISTOR, SMD 5.9K, 1%, 1/8W, 100 PPM, SIZE 0805
2500 NO
Delivery:- Jul.2015- Full
S0182 SMEC, INC USA sts : *DCR
Type : RC73A2D5901FT/F
8. DC2D8620003C4A6 PR-Slno: 9 Value: 620 Ohms iss-no:1
Dt.230711
RESISTOR, 620 Ohms, 5%. 200 PPM, SMD 1/8W, SIZE
: 0805 10000 NO
Delivery:- Jul.2015- Full
S0182 SMEC, INC USA sts : *DCR
Type : RC73L2D621JT/F
------
1.PL SEND YOUR QUOTE WELL BEFORE THE DUE DATE.
2.PL SEND YOUR QUOTE IN A SEALED COVER SUPERSCRIBING TENDER NO.
3.OUR TERMS OF PAYMENT IS NORMAL 60 DAYS CREDIT.
Due Date:28/07/2015 CH. MATERIAL MANAGER-TDP
Chief Material Manager (TDP)
Ph. No. 080 28503968
Email :
NOTE : PLEASE INDICATE THE DUE DATE ON YOUR E-MAIL QUOTATION
SPL.NOTE:
------
PL QUOTE FOR OUR TENDER QTY ONLY ELSE YOUR QUOTATION WILL BE INVALID.
1. The terms and conditions for submission of Tenders (inland) refer
attached Annexure - 'I'
2. The terms and conditions for submission of Tenders, Please visit our Web-Site http:www.itiltd-india.com. For any clarification please feel free to contact us.
3. Only ITI approved sources need to submit their Quote. Other interested bidders may please contact our Vendor Development Section for Registration and Approval Procedures.
Contact No. 0091 – 080 - 28503698/28503629
After Vendor Registration only, the suppliers are eligible to quote. Till that time, their quotations are invalid.
4. Governing Law: Disputes if any, will be within jurisdiction of Bangalore, Karnataka, India.
5. Please indicate whether you fall under purview of MSMED Act.2006
and if so the certified copy of relevant Registration Certificate
as proof may be submitted along with the tender bid.
6. Incase such certificate is not produced at the time of bid you
will not be considered to be falling under this category.