Phone and Voice Mail Training Notes

Phone model: 5330

Repairs, changes, questions?

800-849-8266


VOLUME UP or DOWN:

Provides volume control for the ringer, handset and hands free speakers.

SPEAKER :

Enables and disables hands free mode.

MUTE :

Allows you to temporarily turn your phone’s handset or hands free speaker microphone off during a call. You will still be able to hear the caller but they will not be able to hear you.

FIXED FUNCTION KEYS

CANCEL :

Ends a call when pressed during the call, and, when you are programming the phone. Eliminates any input and returns to the previous menu level.

REDIAL :

Calls the last external number dialed. Pressing your redial key will automatically activate your speakerphone.

HOLD :

Places the current call on hold.

TRANSFER/CONFERENCE:

Initiates a call transfer or establishes a three-party conference call.

MESSAGE :

Flashes to notify you of messages waiting in your voice mailbox. Provides access to your voice mailbox.

DIALPAD:

Use to dial. The keypad on your system is “hot”. This means you do not have to lift your handset before beginning to dial. Once you begin to dial a number, your speakerphone will automatically be activated. You may then lift your handset for a private conversation.

CALL HANDLING

MAKING A CALL:

Dial 9 + the telephone number using the dial pad.

OR

Dial the extension number or use PHONEBOOK.

ANSWERING A CALL:

Lift your handset or press SPEAKER

HOLD:

To place a call on hold, press HOLD with the caller on the line. To retrieve a call from hold, press the flashing line key.

TRANSFER:
With the caller on the line, press TRANS/CONF and dial the extension number of the third party. The caller is now placed on a temporary hold allowing you the option to announce the call to your co-worker before sending the call. Hang-up to complete the transfer.

NOTE: If your co-worker does not answer and you wish to return to the caller, press your CANCEL key .

CONFERENCE:

With the caller on the line, press TRANS/CONF .

Dial 9 + the telephone number of the next party or the extension number of the next party. Wait for an answer and press TRANS/CONF . The conference call has now been established. You may repeat this process for up to 8 party’s total.

PARKING A CALL:

With the caller on line, press the PARK key.

The display will show the 2-digit parking slot, please make a note of this number, then hang up.

PICKING UP A PARKED CALL:

To pick the call up from any extension, lift the handset

Press PARK RETRIEVE.

Enter the 2-digit directory number where the call is parked.

You are now connected to the caller.

HOT DESK:

Press HotDesk. “NO USER LOGGED IN” appears in the display.

Press Login. “ENTER YOUR EXT#” is displayed.

Dial your Extension number and press OK. “Enter your PIN” appears.

Enter your PIN (this will be your vmail passcode) and press OK.

PROGRAMMABLE/SOFT KEYS

PHONEBOOK:

Press PHONEBOOK on your display. Enter the last name of the desired party and press “Lookup.” You now have the option to call the desired party.

VOICEMAIL:

Press the MESSAGE key to access voicemail from your desk. Enter your password.

SETTING UP YOUR MAILBOX FOR THE FIRST TIME

LOGIN PROCEDURE:

From Your Desk:

Press the MESSAGE key

You will hear your mailbox number

Enter temporary passcode: 1111

From Outside of the Office:

Call the main number (or your DID)

Once you hear the main greeting press *

Enter your mailbox number followed by *

Enter temporary passcode: 1111

THE TUTORIAL WILL BEGIN AT THIS POINT

First - Create a Passcode

Press 8 to enter User Options

Press 7 to Enter your Passcode

Enter a new pass code for your mailbox (4-10 digits)

You will hear your new passcode

Second - Record a Greeting

Press 8 to enter User Options

Press 4 to Record a Greeting

Record the Greeting and the press #

Press 7 to Review Your Recording

Press 9 to Save or Press 3 to Discard and Record again

Third - Record your Name

Press 8 to enter User Options

Press 6 to Record a Name

Record the Greeting and the press #

Press 7 to Review Your Recording

Press 9 to Save or Press 3 to Discard and Record again

YOU HAVE COMPLETED THE TUTORIAL. THE MAIN MENU FOLLOWS