Publications at the Faculty of Engineering
1. Dr. Kasim M. Al-Aubidy, "Design and implementation of a PC-based events recorder", Engineering and Technology Magazine, Vol.12, No.11, Nov. 1993.
2. Dr. Kasim M. Al-Aubidy, "Design and evaluation of a fuzzy logic rule-based controller". 11th Inter. Conf. On Applied Informatics, Paper No.(204-066), France 1993.
3. Kasim M. Al-Aubidy, "Computer control and flexible manufacturing systems" . Union of Arab Scientific Research Councils Syp. on Robotics, 4-6 May, Baghdad 1993.
4. Dr. Kasim M. Al-Aubidy, "Application of fuzzy logic algorithm for control of industrial plants". 11th Iraqi Engineering Conf. , 22-25 Nov. , Baghdad 1994.
5. Dr. Kasim M. Al-Aubidy, "Design and implementation of a PC-based tesseral addressing system". 11th Iraqi Engineering Conf. , 22-25 Nov. , Baghdad 1994.
6. Dr. Kasim M. Al-Aubidy, "Real-time control of DC drives using fuzzy algorithms". Engineering and Technology Magazine, Vol. 13, No.9, Sept. 1994.
7. Dr. Kasim M. Al-Aubidy, "Real-time Microcomputer Control of Sensorless AC Machines". 1st Iraqi Technological Conf. , Baghdad 1995.
8. Dr. Kasim M. Al-Aubidy, "Load angle measurement of sensorless AC machines". CATAEE'95 Conf. Philadelphia University, Jordan 1995.
9. Dr. Kasim M. Al-Aubidy, "Self-organizing fuzzy logic controller; design & implementation". CATAEE'95 Conf. Philadelphia University, Jordan 1995.
10. Dr. Kasim M. Al-Aubidy, "Use of fuzzy logic for implementing rule-based control of a flexible link manipulator". Robotics and automation symposium, Baghdad 1995.
11. Dr. Kasim M. Al-Aubidy, "Trajectory planning and tracking of a robot manipulator". Robotics and automation symposium, Baghdad 1995.
12. Dr. Kasim M. Al-Aubidy, "Fuzzy logic control of a distillation column". 2nd Iraqi Technological Conf., May 1996.
13. Dr. Kasim M. Al-Aubidy, "Real-time tuning of PID controllers using fuzzy logic algorithms". Accepted to be published in Engineering and Technology Magazine.
14. Dr. Kasim M. Al-Aubidy, "Expert workstation as an instructional tool using fuzzy logic". 2nd Iraqi Technological Conf., May 1996.
15. Dr. Kasim M. Al-Aubidy, "Design and performance of on-line fuzzy tuning algorithm for conventional PID controllers", JTEA'96 Conference, Tunis, Paper No. 70, Nov. 96.
16. Dr. Kasim M. Al-Aubidy, "Decision-making in expert education system using fuzzy logic". Computer research magazine, No.1, 1996.
17. Dr. Kasim M. Al-Aubidy, "Advisory expert system for post graduate students". Computer research magazine, No.2, 1996.
18. Dr. Kasim M. Al-Aubidy, "Distillation column control using fuzzy logic". The 1st Algerian congress of process control, Algiers, Oct. 1996.
19. Dr. Kasim M. Al-Aubidy, "Computer control of a distillation column using fuzzy logic decouplers". The 9th Intr. Conf. on Computer Theory and Applications, Egypt, Sept. 1996.
20. Dr. Kasim M. Al-Aubidy, "Fuzzy advisory system for student registration in the technical institutes". College of Engineering Conference, Al-Mystansirya University, Baghdad, April 1997.
21. Dr. Kasim M. Al-Aubidy, "Decision-making in intelligent distributed computer systems". The 1st Baghdad Conf. For Electr. Eng., Baghdad 1997.
22. Dr. Kasim M. Al-Aubidy, "Student modeling in expert education systems using fuzzy logic". The 2nd Conf. of Computer Technology & Applications, Union of Arab Scientific Research Councils, Baghdad 1997.
23. Dr. Kasim M. Al-Aubidy, "Fuzzy logic & computer aided instruction systems". Optimum Applications of Computer Technology Symp. Tripoli, 1998.
24. Dr. Kasim M. Al-Aubidy, "A fuzzy expert tool for educational system design". Software Eng. Education Symposium (SEES'98), 18-20 November 1998, Poland.
25. Dr. Kasim M. Al-Aubidy, "An expert advisor for course selection in universities and higher institutes". Engineering Conf.'98, Libya 1998.
26. Dr. Kasim M. Al-Aubidy, "Fuzzy logic and industrial computer control systems". Eng. Conf.'98, Libya 1998.
27. Dr. Kasim M. Al-Aubidy, "A Virtual reality based educational module for knowledge learning & skills training", 1st Arab Conference for Software Industry & development, Amman 11-13 July 1999.
28. Dr. Kasim M. Al-Aubidy, "Design of a programmable bus for microprocessor-based systems", 3rd International Conference IEE-CATAEE99, Page (165-169), Amman 19-20 October 1999.
29. Dr. Kasim M. Al-Aubidy, "Neural network-based fuzzy identifier: design & evaluation", IEEE-ACIDCA'2000 Conf., Page (108-113), Vol. (IM), Tunisia 22-24 March 2000.
30. Dr. Kasim M. Al-Aubidy, "A hierarchical manufacturing route planner based on heuristic algorithm", IEEE-ACIDCA'2000 Conf., Page (214-220), Vol. (EIA), 22-24 March 2000.
31. Dr. Kasim M. Al-Aubidy, "Modeling an Interactive FMS scheduler Using Colored Petri Nets", IEEE/SCS 2nd Middle East Conf. On Simulation & Modeling, Page (54-61), 28-30/8/2000.
32. Dr. Kasim M. Al-Aubidy, "A Real-Time Hierarchical Controller for Robots in Flexible Manufacturing Systems", German Conf on Smart Systems & Devices SSD-2001, Tunisia March 2001.
33. Dr. Kasim M. Al-Aubidy, "Fuzzy logic & computer aided instruction systems". Optimum Applications of Computer Technology Symp. Tripoli, 1998.
34. Dr. Kasim M. Al-Aubidy, "A fuzzy expert tool for educational system design". Software Eng. Education Symposium (SEES'98), 18-20 November 1998, Poland.
35. Dr. Kasim M. Al-Aubidy, "An expert advisor for course selection in universities and higher institutes". Engineering Conf.'98, Libya 1998.
36. Dr. Kasim M. Al-Aubidy, "Fuzzy logic and industrial computer control systems". Eng. Conf.'98, Libya 1998.
37. Dr. Kasim M. Al-Aubidy, "A Virtual reality based educational module for knowledge learning & skills training", 1st Arab Conference for Software Industry & development, Amman 11-13 July 1999.
38. Dr. Kasim M. Al-Aubidy, "Design of a programmable bus for microprocessor-based systems", 3rd International Conference IEE-CATAEE99, Page (165-169), Amman 19-20 October 1999.
39. Dr. Kasim M. Al-Aubidy, "Neural network-based fuzzy identifier: design & evaluation", IEEE-ACIDCA'2000 Conf., Page (108-113), Vol. (IM), Tunisia 22-24 March 2000.
40. Dr. Kasim M. Al-Aubidy, "A hierarchical manufacturing route planner based on heuristic algorithm", IEEE-ACIDCA'2000 Conf., Page (214-220), Vol. (EIA), 22-24 March 2000.
41. Dr. Kasim M. Al-Aubidy, "Modeling an Interactive FMS scheduler Using Colored Petri Nets", IEEE/SCS 2nd Middle East Conf. On Simulation & Modeling, Page (54-61), 28-30/8/2000.
42. Dr. Kasim M. Al-Aubidy, "A Real-Time Hierarchical Controller for Robots in Flexible Manufacturing Systems", German Conf on Smart Systems & Devices SSD-2001, Tunisia March 2001.
43. Dr. I. Badran, "PH.D Thesis Detection and Measurements of Internal Discharges in High Voltage Bushings Under Direct – Voltage Conditions". University of London, Queen Mary College, London 1970
44. Dr. I. Badran, "Internal Discharges in Paper Insulation Under Direct- Voltage Conditions. International Symposium", High-Voltage Technology, Munich, Germany, March 1972.
45. Dr. I. Badran, "Oscillographic Records of Internal Discharges in Solid Insulation under Direct-Voltage Conditions". Bulletin of the Faculty of Engineering Vol. 2,University of Libya, Libya 1973.
46. Dr. I. Badran ,"On the Fundamentals of Environment Problems in Tropical Areas". Cyprus Civil Engineering and Architects Associations, Nekoosa, Feb. 1976.
47. Dr. I. Badran, "Some Aspects of Planning of Rural Electrification", Rural Electrification Conference, Baghdad 1975.
48. Dr. I.Badran , "Natural Day Light and Solar Maps". National Center for Architecture and Engineering Constancy,Baghdad 1976
49. Book: Dr. I.Badran, Problems of Science & Technology in the Arab World, Amman, 1978 and 1985
50. Book: Dr. I.Badran, Science, Technology & Development in the Arab world, Baghdad, 1984
51. Book: Dr. I.Badran, Encyclopedia of Scientists & Inventors, Beirut, 1987
52. Book: Dr. I.Badran, Handbook of Illumination Engineering, Baghdad, 1976
53. Book: Dr. I.Badran, General Recommendations for Illumination, Amman, 1978
54. Book: Dr. I.Badran, Problems of Development in the Arab World, Amman, 1988
55. Book: Dr. I.Badran, Energy in Jordan, Amman, 1988
56. Book: Dr. I.Badran, Nuclear Energy & The Chernobyl Incident, Amman, 1988
57. Book: Dr. I.Badran, Natural Resources, Energy & Water in Jordan, Amman, 1994
58. Book: Dr. I.Badran, Studies on the Arab Mind, Beirut, 1974
59. Book: Dr. I.Badran, History & Progress in the Arab world, Beirut, 1991
60. Book: Dr. I.Badran, On Culture, Thought & Progress, Amman, 1993
61. Book: Dr. I.Badran, Jordan and Moderationism, Amman 1988
62. Book: Dr. I.Badran, The Case No. 1387 (Theatrical Play), Damascus, 1974
63. Book: Dr. I.Badran, The Mirage (Theatrical Play), Baghdad, 1976
64. Book: Dr. I.Badran, Climate Data for Jordan, Jordan Electricity Authority, Amman 1987
65. Book: Dr. I.Badran, Safety Regulations for the Operation of High Medium & Low Voltage Networks, Jordan Electricity Authority, Amman 1987
66. Book: Dr. I.Badran, General Standards & Regulations for Non-Industrial Electrical Installations, Jordan Electricity Authority, Amman, 1987.
67. Book: Dr. I.Badran, Agriculture Agenda, university of jordan, 1990.
68. Book: Dr. I.Badran, Directory of Jordanian Exports, Ministry of Industry & Trade, Amman, 1991.
69. Book: Dr. I.Badran, A Guide Book to the Investor, Ministry of Industry & Trade, Amman, 1991.
70. Dr. Monaf Al-Din, "The Use of Canned Rotors in High Speed Permanent Magnet Machines"; Fifth International Conference on Electrical Machines and Drives; 1991.
71. Dr. Monaf Al-Din, "Use of Canned Rotors in High-Field Permanent Magnet Machines"; IEE Proce., Pt. B., Vol. 139, No. 5, 1992.
72. Dr. Monaf Al-Din, " Knowledge Based Automatic Mesh Generation for Finite Elements Method"; The Science and Technology Magazine, The University of Technology, Baghdad-Iraq, 1996.
73. Dr. Monaf Al-Din, " A New Method to Compute Eddy Current Losses by the Finite Elements Method"; IEEE Industrial Applications Annual Meeting, Paper Ref. 97301, New Orleans, 1997.
74. Dr. Monaf Al-Din , "The Use of Low Loss Low Permeability Materials in the Design of High Speed Permanent Magnet Motors"; 2nd Conf. On Computation Aspect and Their Applications in Electrical Engineering (CATAEE-97), Philadelphia University, Amman-Jordan.
75. Dr. Monaf Al-Din, "Computer Aided Analysis of High Speed Permanent Magnet Synchronous Motors"; 2nd Conf. On Computation Aspect and Their Applications in Electrical Engineering (CATAEE-97), Philadelphia University, Amman-Jordan.
76. Dr. Monaf Al-Din, " Numerical Evaluation of Electromagnetic Torque in Permanent Magnet Synchronous Motors", MEMS'2000 2nd Middle Eastern Symposium on SIM, Philadelphia University, Amman-Jordan.
77. Dr. Monaf Al-Din, " Speed Control of Induction Motor Using PWM Technique and Series Reactor", MEMS'2000 2nd Middle Eastern Symposium on SIM, Philadelphia University, Amman-Jordan. 2000.
78. Dr. Monaf Al-Din, "A Novel Fuzzy Like PI Controller", First International Industrial Engineering Conference, The University of Jordan, Amman-Jordan, 2001.
79. Nabil Kablan, "An Image Processing System Organization". Leningrad Electrical Engineering Institute. Journal, N324, St.Petersburg.Russia, 1983.
80. Nabil Kablan, "An Image Input Device and Image Primarily Processing". In book "Theory and Practice of Information System Construction", Journal of Sarative University, Sarative, Russia, 1982.
81. Nabil Kablan, "An image Processing Program" , Pack - System-79 In new programs Library, Moscow, Number (2) 07311-81,1982.
82. Dr. J. Al- Atrash, "Design of Low Voltage Distribution Networks using the Switched Winding Transformers " , Proceedings of Jordan International Power System Conference , Octobers 4-6/1993, PP 130-135 .
83. Dr. J. Al- Atrash, "Combining The Historical Data and load Flow Results to Calculate Energy losses in Distribution System " , Proceedings of computational aspects and their application electrical engineering . May 21-23/1995 ( CATAEE-95) ,PP1-16.
84. Dr. J. Al- Atrash, New Approaches for a Better Evaluation of the Energy Losses in a Distribution System" , Al-Rafidan Engineering Journal, vol 7,No:1,1999, PP1-22.
85. Dr. J. Al- Atrash, "Design of 500KVA Thyristor Switched Transformers to Reduce Energy Losses" , Engineering and technology journal vol: 28, Number 2,2001, PP72-78.
86. Dr. J. Al- Atrash, "Use Of the Switchable Transformers in Distribution Power System", vol 20, Number 5,2001, PP315-336.
87. Manhal Sirat, "Application of artificial Neural Networks to fracture Analysis" , at the Aspo HRL, SE-Sweden :Facture Sets Classification (In Press: Int. J. Rock Mech. Min. Sci.),2001.
88. Manhal Sirat, "Stress Control of Hydraulic Conductivity in Fracture-Saturated Swedish Bedrock", (In Press: Engineering Geology, Special edition on geosciences and nuclear waste disposal), 2001.
89. Manhal Sirat, "Block Tilting" at the Aspo HRL, SE- Sweden; Structural and Neural Network analyses.
90. Manhal Sirat, "Applying artificial neural Networks to predict Quaternary pale climate in Arctic Ocean".
91. Manhal Sirat, "Neural Networks Analyses of Agri-chemical Vulnerability Assessment of Water from Rural Private Wells", within United States Of America.
92. Dr. Hussein Abdul Kadir, "Opimal performance of HMOS VLSI Circuits " ,Microelectronics No.6 Vol.13 Nov./Dec. 1982 .
93. Dr. Hussein Abdul Kadir, "Scaling down effect on the performances of VLSI HMOS circuits " Iraqi Conference on Engineering 16-19 Dec. 1985 Baghdad-IRAQ
94. Dr. Hussein Abdul Kadir, "Thermal analysis of VLSI HMOS circuits " Forth scientific conference ,Scientific Research Council ,23-28 Oct. 1986 .Baghdad-Iraq.
95. Dr. Hussein Abdul Kadir, "Computer Aided Layout design for integrated circuit fabrication " ,Symposium on industrial applications of micro and personal computers ,Scientific Research Council 16-18 Dec. 1986 ,Baghdad -Iraq
96. Dr. Hussein Abdul Kadir, "Logic level and performance variation of VLSI circuits as a function of βr ",Modeling, Simulation and Control ,A. AMSE Press Vol.12 No.3,1987 .
97. Dr. Hussein Abdul Kadir, "Effect of deposition conditions on the optical properties of CdS Thin Film " International AMSE conference on modeling and simulation ,Karlsruhe (west Germany ), Vol.2A 20-22 July 1987 .
98. Dr. Hussein Abdul Kadir, "Electrical properties variation of CdS thin film with deposition conditions and film thickness " ,First regional Symposium on Material Science in the Arab Status , 29-31 Dec. 1987 , Alexandria University , EGYPT
99. Dr. Hussein Abdul Kadir, "Substrate bias generator ,its importance and characteristics in VLSI circuits ", Modeling , Simulation and Control ,A, Vol. 15 ,No.4 , 1988
100. Dr. Hussein Abdul Kadir, "Uniformity and Thermal characterization of Al-CdS-Al structures at different temperatures " ,Fifth Scientific Conference ,Scientific Research Council , 7-11 oct.1989 Baghdad –Iraq.
101. Dr. Hussein Abdul Kadir, "Information storage capability of thin film devices ", Journal of Engineering and Technology , Vol.5 annex No.10 , 1991 ,University of Technology –Iraq.
102. Dr. Hussein Abdul Kadir, "Thin film RCG notch filter modeling " ,Mediterranean Electro-technical Conference Melecon ,91 IEEE ,22-24 May 1991 Yugoslavial.
103. Dr. Hussein Abdul Kadir, "CdS/pSi thin film devices ,their characteristics and applications " ,First Basrah electrical Engineering Symposium ,20-21 April 1992 ,Basrah –Iraq .
104. Dr. Hussein Abdul Kadir, "Thin film CdS diodes and their space charge injection behavior " , Journal of Engineering and Technology Vol.11 No.4 ,1992 ,University of Technology ,Iraq.
105. Dr. Hussein Abdul Kadir, "Conduction mechanism in double insulated layer fabricated on epitaxial GaAs " 11th Iraqi Engineering Conference ,Nov. 1993 , Baghdad –Iraq.
106. Dr. Hussein Abdul Kadir, "Electrical and optical characteristics of MIOS and MIMOS structures " ,Mu`tah Journal Vol.9 ,No.3 ,1994 ,p. 271-284 ,Mu`tah University –Jordan.