SECTION 10 21 00 - Compartments and Cubicles

TOILET COMPARTMENTS

Display hidden notes to specifier. (Don't know how? Click Here)

** NOTE TO SPECIFIER ** ASI Global Partitions; powder coated steel, stainless steel, solid polymer, plastic laminate, and phenolic toilet compartments.
.
This section is based on the products of ASI Global Partitions, which is located at:
2171 Liberty Hill Rd.
Eastanollee, GA 30538
Tel: 706-827-2700
Fax: 706-827-2710
Email: request info ()
Web: asi-globalpartitions.com
[ Click Here ] for additional information.
Global Partitions manufactures a versatile line of toilet partitions. Numerous mounting styles are available to accomplish the design and functionality desired. Our engineers can assist in the layout and design of toilet partitions to meet ADA codes and special local requirements.
See our SpecWizard: Click Here

1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project. If more than one type of compartment is required, indicate which type is used where, either on the drawings or in the Schedule Article of this section.

1.1.1 Powder coated steel partitions.

1.1.2 Stainless steel partitions.

1.1.3 Solid polymer partitions.

1.1.4 Plastic laminate partitions.

1.1.5 Phenolic partitions.

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete sections below not relevant to this project; add others as required.

1.2.1 Section 05 50 00 - Metal Fabrications.

1.2.2 Section 06 11 16 - Mechanically Graded Lumber.

1.2.3 Section 10 28 00 - Toilet, Bath, and Laundry Accessories.

1.3 REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not required by the text of the edited section.

1.3.1 ASTM International: ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.

1.3.2 United States Green Building Council (USGBC): LEED Green Building Rating System.

1.4 SUBMITTALS

1.4.1 Submit under provisions of Section 01 30 00 - Administrative Requirements.

1.4.2 [ Product Data ]: Manufacturer's data sheets on each product to be used, including:

1.4.2.1 Literature indicating typical panel, pilaster, door, hardware and fastening.

1.4.2.2 Preparation instructions and recommendations.

1.4.2.3 Storage and handling requirements and recommendations.

1.4.2.4 Installation methods.

1.4.3 Shop Drawings:

1.4.3.1 Dimensioned plans indicating layout of toilet compartments.

1.4.3.2 Dimensioned elevations indicating heights of doors, pilasters, separation partitions, and other components; indicate locations and sizes of openings in compartment separation partitions for toilet and bath accessories to be installed in partitions; indicate floor and ceiling clearances.

1.4.3.3 Details indicating anchoring components (bolt layouts) and methods for project conditions; indicate components required for installation, but not supplied by toilet compartment manufacturer.

** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.

1.4.4 Selection Samples: For each finish product specified, one complete set of color selection guides representing manufacturer's full range of available colors, textures and patterns.

1.4.5 Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, texture and pattern.

**NOTE TO SPECIFIER.** Delete if LEED Certification not required.

1.4.6 LEED Green Building Rating System: Submit manufacturer's documentation of recycled content, in accordance with LEED credit calculations.

1.4.7 Manufacturer's Certificates: Certify products meet or exceed specified requirements.

1.5 DELIVERY, STORAGE, AND HANDLING

1.5.1 Deliver, store and handle materials and products in strict compliance with manufacturer's instructions and recommendations and industry standards.

1.5.2 Store products indoors in manufacturer's or fabricator's original containers and packaging, with labels clearly identifying product name and manufacturer. Protect from damage.

1.5.3 Lay cartons flat, with adequate support to ensure flatness and to prevent damage to pre-finished surfaces.

1.5.4 Do not store where ambient temperature exceeds 120 degrees F (49 degrees C).

1.6 PROJECT CONDITIONS

1.6.1 Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

1.6.2 Do not deliver materials or begin installation until building is enclosed, with complete protection from outside weather, and building temperature maintained at a minimum of 60 degrees F (15.6 degrees C).

1.7 WARRANTY

** NOTE TO SPECIFIER ** Delete warranty provisions for products not required.

1.7.1 Manufacturers Standard Warranty: Provide warranty for Powder Coated Steel Material against chipping, flaking, cracking, or discoloration for 3 years, assuming proper maintenance according to manufacturer's recommendations.

1.7.2 Manufacturers Standard Warranty: Provide warranty for Stainless Steel Material: Against corrosion or discoloration for 5 years, assuming proper maintenance according to manufacturer's recommendations.

1.7.3 Manufacturers Standard Warranty: Provide warranty for Solid polymer HDPE Material: Against breakage, corrosion, and delamination for 15 years.

1.7.4 Manufacturers Standard Warranty: Provide warranty for Plastic Laminate Material: Against discoloration or delamination for 2 years, assuming proper maintenance according to manufacturer's recommendations.

1.7.5 Manufacturers Standard Warranty: Provide warranty for Phenolic Material against delamination, breakage, or corrosion for 10 years, assuming proper maintenance according to manufacturer's recommendations.

1.8 COORDINATION

1.8.1 Coordinate Work with placement of support framing and anchors in walls and ceilings.

2 PRODUCTS

2.1 MANUFACTURERS

2.1.1 Acceptable Manufacturer: ASI Global Partitions, which is located at: 2171 Liberty Hill Rd.; Eastanollee, GA 30538; Tel: 706-827-2700; Fax: 706-827-2710; Email: request info (); Web: asi-globalpartitions.com

2.1.2 Substitutions: Not permitted.

2.1.3 Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

** NOTE TO SPECIFIER ** Select the configurations required from the following paragraphs and delete those paragraphs not required.

2.2 COMPARTMENTS AND SCREENS

** NOTE TO SPECIFIER ** The following paragraph is for powder coated steel, stainless steel, plastic laminate and phenolic systems only.

2.2.1 Toilet Compartments: Floor anchored/overhead braced.

2.2.1.1 Compartment Depth and Width: As scheduled and indicated on Drawings.

** NOTE TO SPECIFIER ** Delete door width not required.

2.2.1.2 Door Width: 24 inches (610 mm), minimum; at ADA accessible compartments 36 inches (915 mm) minimum.

2.2.1.3 Door Width: As scheduled and indicated on Drawings.

** NOTE TO SPECIFIER ** Delete height above floor not required.

2.2.1.4 Height Above Floor: 12 inches (305 mm).

2.2.1.5 Height Above Floor: 6 inches (152 mm) - Ultimate Privacy.

** NOTE TO SPECIFIER ** Delete door/panel heights not required.

2.2.1.6 Door/Panel Height: 58 inches (1473 mm).

2.2.1.7 Door/Panel Height: 64 inches (1625 mm) - Ultimate Privacy.

2.2.1.8 Door/Panel Height: 72 inches (1829 mm) - Ultimate Privacy.

2.2.1.9 Pilaster Height: 82 inches (2083 mm).

** NOTE TO SPECIFIER ** The following paragraph is for solid polymer systems only.

2.2.2 Toilet Compartments: Floor anchored/overhead braced solid polymer.

2.2.2.1 Compartment Depth and Width: As scheduled and indicated on Drawings.

** NOTE TO SPECIFIER ** Delete door width not required.

2.2.2.2 Door Width: 24 inches (610 mm), minimum; at ADA accessible compartments 36 inches (915 mm) minimum.

2.2.2.3 Door Width: As scheduled and indicated on Drawings.

** NOTE TO SPECIFIER ** Delete height above floor not required.

2.2.2.4 Height Above Floor: 14 inches (356 mm).

2.2.2.5 Height Above Floor: 6 inches (152 mm) - Ultimate Privacy.

** NOTE TO SPECIFIER ** Delete door/panel heights not required.

2.2.2.6 Door/Panel Height: 55 inches (1397 mm).

2.2.2.7 Door/Panel Height: 64 inches (1625 mm) - Ultimate Privacy.

2.2.2.8 Door/Panel Height: 72 inches (1829 mm) - Ultimate Privacy.

2.2.2.9 Pilaster Height: 82 inches (2083 mm).

** NOTE TO SPECIFIER ** The following paragraph is for powder coated steel, stainless steel, plastic laminate and phenolic systems only.

2.2.3 Toilet Compartments: Ceiling hung.

2.2.3.1 Compartment Depth and Width: As scheduled and indicated on Drawings.

** NOTE TO SPECIFIER ** Delete door width not required.

2.2.3.2 Door Width: 24 inches(610 mm), minimum; at ADA accessible compartments 36 inches (915 mm) minimum.

2.2.3.3 Door Width: As scheduled and indicated on Drawings.

** NOTE TO SPECIFIER ** Delete height above floor not required.

2.2.3.4 Height Above Floor: 12 inches (305 mm).

2.2.3.5 Height Above Floor: 6 inches (152 mm) - Ultimate Privacy.

** NOTE TO SPECIFIER ** Delete door/panel heights not required.

2.2.3.6 Door/Panel Height: 58 inches (1473 mm).

2.2.3.7 Door/Panel Height: 64 inches (1625 mm) - Ultimate Privacy.

2.2.3.8 Door/Panel Height: 72 inches (1829 mm) - Ultimate Privacy.

** NOTE TO SPECIFIER ** Delete pilaster height not required. Ceiling height not to exceed 108 inches for Powder Coated Enamel, Stainless Steel, Plastic Laminate and Phenolic. Phenolic pilasters over 84 inches require bracing.

2.2.3.9 Pilaster Height: As scheduled and indicated on Drawings.

2.2.3.10 Pilaster Height: ______inches.

** NOTE TO SPECIFIER ** The following paragraph is for solid polymer systems only.

2.2.4 Toilet Compartments: Ceiling hung, solid polymer.

2.2.4.1 Compartment Depth and Width: As scheduled and indicated on Drawings.

** NOTE TO SPECIFIER ** Delete door width not required.

2.2.4.2 Door Width: 24 inches (610 mm), minimum; at ADA accessible compartments 36 inches (915 mm) minimum.

2.2.4.3 Door Width: As scheduled and indicated on Drawings.

2.2.4.4 Height Above Floor: 14 inches (305 mm).

2.2.4.5 Door/Panel Height: 55 inches (1473 mm).

** NOTE TO SPECIFIER ** Delete pilaster height not required. Maximum height not to exceed 96 inches with bracing.

2.2.4.6 Pilaster Height: As scheduled and indicated on Drawings.

2.2.4.7 Pilaster Height: ______inches.

** NOTE TO SPECIFIER ** The following paragraph is for powder coated steel, stainless steel, plastic laminate and phenolic systems only.

2.2.5 Toilet Compartments: Floor anchored.

2.2.5.1 Compartment Depth and Width: As scheduled and indicated on Drawings.

** NOTE TO SPECIFIER ** Delete door width not required.

2.2.5.2 Door Width: 24 inches(610 mm), minimum; at ADA accessible compartments 36 inches (915 mm) minimum.

2.2.5.3 Door Width: As scheduled and indicated on Drawings.

** NOTE TO SPECIFIER ** Delete height above floor not required.

2.2.5.4 Height Above Floor: 12 inches (305 mm).

2.2.5.5 Height Above Floor: 6 inches (152 mm) - Ultimate Privacy.

** NOTE TO SPECIFIER ** Delete door/panel heights not required.

2.2.5.6 Door/Panel Height: 58 inches (1473 mm).

2.2.5.7 Door/Panel Height: 64 inches (1625 mm) - Ultimate Privacy.

2.2.5.8 Door/Panel Height: 72 inches (1829 mm) - Ultimate Privacy.

** NOTE TO SPECIFIER ** Delete pilaster heights not required.

2.2.5.9 Pilaster Height: 70 inches (1778 mm).

2.2.5.10 Pilaster Height: 72 inches (1829 mm) - Ultimate Privacy.

** NOTE TO SPECIFIER ** The following paragraph is for powder coated steel, stainless steel, plastic laminate and phenolic systems only.

2.2.6 Toilet Compartments: Floor and ceiling anchored.

2.2.6.1 Compartment Depth and Width: As scheduled and indicated on Drawings.

** NOTE TO SPECIFIER ** Delete door width not required.

2.2.6.2 Door Width: 24 inches (610 mm), minimum; at ADA accessible compartments 36 inches (915 mm) minimum.

2.2.6.3 Door Width: As scheduled and indicated on Drawings.

** NOTE TO SPECIFIER ** Delete height above floor not required.

2.2.6.4 Height Above Floor: 12 inches (305 mm).

2.2.6.5 Height Above Floor: 6 inches (152 mm) - Ultimate Privacy.

** NOTE TO SPECIFIER ** Delete door/panel heights not required.

2.2.6.6 Door/Panel Height: 58 inches (1473 mm).

2.2.6.7 Door/Panel Height: 64 inches (1625 mm) - Ultimate Privacy.

2.2.6.8 Door/Panel Height: 72 inches (1829 mm) - Ultimate Privacy.

** NOTE TO SPECIFIER ** Delete pilaster heights not required.

2.2.6.9 Pilaster Height: ______inches.

2.2.6.10 Pilaster Height: As scheduled and indicated on Drawings.

** NOTE TO SPECIFIER ** The following paragraph is for solid polymer systems only.

2.2.7 Toilet Compartments: Floor and ceiling anchored, solid polymer.

2.2.7.1 Compartment Depth and Width: As scheduled and indicated on Drawings.

** NOTE TO SPECIFIER ** Delete door width not required.

2.2.7.2 Door Width: 24 inches (610 mm), minimum; at ADA accessible compartments 36 inches (915 mm) minimum.

2.2.7.3 Door Width: As scheduled and indicated on Drawings.

** NOTE TO SPECIFIER ** Delete height above floor not required.

2.2.7.4 Height Above Floor: 12 inches (305 mm).

2.2.7.5 Height Above Floor: 6 inches (152 mm) - Ultimate Privacy.

** NOTE TO SPECIFIER ** Delete door/panel heights not required.

2.2.7.6 Door/Panel Height: 55 inches (1397 mm).

2.2.7.7 Door/Panel Height: 64 inches (1625 mm) - Ultimate Privacy.

2.2.7.8 Door/Panel Height: 72 inches (1829 mm) - Ultimate Privacy.

** NOTE TO SPECIFIER ** Delete pilaster heights not required.

2.2.7.9 Pilaster Height: ______inches.

2.2.7.10 Pilaster Height: As scheduled and indicated on Drawings.

2.2.8 Privacy and Urinal Screens: Post-to-ceiling.

2.2.8.1 Screen Panel Width: As scheduled and indicated on Drawings.

** NOTE TO SPECIFIER ** 58 inch height is available for solid polymer screens only. All other screen types available in 55 inch height. Delete screen panel height not required.

2.2.8.2 Screen Panel Height: 58 inches (1473 mm).

2.2.8.3 Screen Panel Height: 55 inches (1397 mm).

** NOTE TO SPECIFIER ** 12 inch height is available for solid polymer screens only. All other screen types available in 14 inch height. Delete height above floor not required.

2.2.8.4 Height Above Floor: 12 inches (305) mm.

2.2.8.5 Height Above Floor: 14 inches (356) mm.

2.2.8.6 Post: 1-3/4 inches (44 mm) square by 10 feet (3048 mm) long maximum.

2.2.8.7 Pilaster: 7 inches (177 mm) wide by 10 feet (3048 mm) long, maximum.

2.2.9 Privacy and Urinal Screens: Floor anchored.

2.2.9.1 Screen Panel Width: As scheduled and indicated on Drawings.

** NOTE TO SPECIFIER ** 58 inch height is available for solid polymer screens only. All other panel types available in 55 inch height. Delete screen panel height not required.