Product name / Confidentiality level
FWT / For internal use only
Product version / Total 13 pages
Guide to Configuration of Huawei USB FWT Mac OS Driver
Prepared by / HopeCao (ID: 37496) / Date / 2008-3-18Reviewed by / Date
Approved by / Date
Authorized by / Date
Huawei Technologies Co., Ltd.
All rights reserved
(BY-WTX-T02 V3.20/ IPD-CMM V3.0 / for internal use only)
Revision Record
2005-12-22 / 1.0 / First draft completed / Cao Hepu (ID: 37496)
2006-3-27 / 1.5 / “Configure APN” Section Added / Zhang CongKuan
(ID: 60012361)
2006-3-30 / 2.0 / Update the attached driver package / Zhang CongKuan
(ID: 60012361)
2006-8-18 / 2.2 / Update the driver package to support INTEL MAC system / HopeCao
(ID: 37496)
2006-12-28 / 2.6 / Add EC321/EC325 INFO / HopeCao
(ID: 37496)
Table of Contents
1 Introduction 7
2 Installing Data Card Driver 7
3 Configuring Dialup Connection for Data Card 7
3.1 Insert the data card into the Computer. 7
3.2 Open “System Preference” 7
3.3 Click “Network” in “System Preference” 8
3.4 Input PPP parameters 8
3.5 Input Modem Parameters 9
Modem: Select “HUAWEI Mobile Connect – 3G Modem” in the popup box 9
3.6 Login Dial Up Network 10
List of Tables
Table 1 Abbreviations and acronyms 6
List of Figures
Figure 1 Open System Preference 7
Figure 2 System Preference 8
Figure 3 Network – Page “PPP “ 9
Figure 4 Input Modem Parameters 10
Figure 5 Login Dial Up Network 11
Figure 6 Network Status - Idle 11
Figure 7 Network Status - connected 12
Guide to Configuration of Huawei USB FWT Mac OS Driver
Key words: driver, Mac OS, dialup connection
Abstract: This document introduces how to configure the HUAWEI USB FWT driver and its dialup connection in a Mac OS.
Acronyms and abbreviations:
Abbreviations / Full spelling /Table 1 Abbreviations and acronyms
1 Introduction
This document instructs how to install HUAWEI USB FWT driver in a Mac OS environment and how to configure the dialup connection for the data card.
The Mac OS referred to in this document is 10.3.3 or later.
2 Installing Data Card Driver
Decompress the “MobileConnectDriver 2.9.9.zip” program packet in the appendix to obtain one installation packages “MobileConnectDriver 2.9.9 test.pkg”. Double click the package to install the driver and restart the system.
3 Configuring Dialup Connection for FWT
3.1 Connect FWT to the Computer.
3.2 Open “System Preference”
Figure 1 Open System Preference
Figure 2 System Preference
3.3 Click “Network” in “System Preference”
3.4 Input PPP parameters
Select the “Huawei Technologies” as the follow diagram:
Account Name: a name to identify the dial up network account.
Password: password to login the dial up network.
Telephone Number: must be *#777.
Figure 3 Network – Page “PPP “
3.5 Input Modem Parameters
Modem: Select “HUAWEI Mobile Connect – 3G Modem” in the popup box
Disable the item “Wait for dial tone before dialing
Dialing: Selct the Tone item
Sound: Select the Off item
Click “Apply Now” to apply the settings.
Figure 4 Input Modem Parameters
3.6 Login Dial Up Network
1 Click the button of “Dial Now”, and the “Network Status” dialog will appear.
2 Click “Connect” in the “Network Status” dialog, wait for a minute, then the dial up network will be connected.
Figure 5 Login Dial Up Network
Figure 6 Network Status - Idle
Figure 7 Network Status - connected
Attachment:
All rights reserved Page 7 of 13