Name of Institute: Galaxy Global Educational Trust's Group of Institutions, Dinarpur, Ambala

Name of Institute: Galaxy Global Educational Trust's Group of Institutions, Dinarpur, Ambala

Name of Teacher:Gaurav Chauhan Designation: Assistant Professor

Class: B.Tech3rdYear Sem:VI Subject:EMD

Deptt.: Electrical Engg. For the Session: 2017-2018

Month / Class / Topic/Chapters Covered / Academic Activity / Test/ Assignment
January(10-12) / 4 / GENERAL: General features , limitations of electrical machine design, specific loadings thermal designtypes of enclosures. ventilation, heat dissipation.
January(17-19) / 4 / Temperature rise, heating & cooling cycles, rating of machines, cooling media used, advantages of hydrogen cooling, effect of size and ventilation.
January(24-25) / 3 / DC MACHINES: Main parts ,Output equation, choice of specific loadings
February(1-2&7) / 4 / Choice of poles and speed, Design of core length, armature diameter, depth of armature core ,air gap length, cross section of armature conductors.
February(8-10) / Cultural & Sports
February(15-16) / 2 / Armature slots ,design of field systemfield poles, field coils, commutater.
February(21-23) / 4 / TRANSFORMERS: Main parts of transformer, Standard specifications, output equation, voltage per turn , optimum design, design of core , design of winding.
February(26-28) / Sessional-1st
March(1&7-8) / 4 / Simplified steps for transformer design, tank and Cooling tubes, Operating calculationscircuit parameters, magnetizing current, losses and efficiency, Temperature rise and regulations from design data.
March(9) / Technical Event
March(14-15) / 3 / SYNCHRONOUS MACHINES: Types of construction, types of synchronous alternators Specifications, output equation.Split phase, starting methods
March(16) / Guest Lecture
March(21-23) / 4 / Types & applications. Three Phase Synchronous Generators: Principle, construction, EMF equation,design of salient pole machines. Main dimensions, short circuit ratio
March(28-30) / 4 / Length of air gap, choice of armature slots, turns per phase, conductor section , design difference between turbo alternator & salient pole generators, direct & indirect cooling.
March(31) / Industrial Visit
April(4-6) / 4 / INDUCTION MOTORS:
Three Phase Induction Motor: Standard specifications, output equations, choice of specific loadings, main dimensions, conductor size and turns, no. of slots
April(11-12) / 3 / Slot design, stator core depth, rotor design, rotor bars& slots area, end rings . SINGLE PHASE INDUCTION MOTOR: output equations, specific loadings, main dimensions.Design of main and auxiliary winding, capacitor design, equivalent circuit parameters
April(13&18) / 3 / Torque, efficiency.COMPUTER AIDED DESIGN: Computerization of design procedures, development of computer programs & performance predictions, optimization techniques & their application to design problems.
April(19-21) / Session End / Sessional-2nd

Signature of Teacher
(With Date)