PHX Series Outdoor Blank-out LED Backlit Signs

Technical Specifications

The PHX Series LED sign is designed with high-intensity, LED backlit illumination and a block letter-style message face. The sign message illuminates when turned on and blanks out or disappears when off. PHX Series LED signs are guaranteed readable in direct sunlight.

It is designed with a solid-state circuit board and constant current power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our built-in Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch sold separately. UL/cUL Listed for wet locations. Made in the USA.

Illumination / Backlit, high-intensity LEDs
LED Message Colors / Red, Amber, Green, Blue and White
Message / Standard Font: Swiss 721 Bold BT
Message blanks-out when off.
Stock messages or custom messages available
Electrical / Input voltage 120-277VAC or low volt 12-24VDC
UL/cUL Listed for wet locations
Cabinet Construction
Single Faced & Double Faced up to 14”H x 18”W / One-piece extruded aluminum frame with an ” thick dark grey diffused acrylic face panel
Cabinet Construction
Double Faced larger than 14”H x 18”W / Available but requires custom engineering
Cabinet Depth / Single Faced: 2¼”
Double Faced: 5½” deep for signs up to 14”H x 18”W
Cabinet Finish / Standard: Duranodic Bronze
Options: Custom paint colors or color match paint
Single Face Standard Cabinet Sizes / Standard sizes: 7”H x 7”W, 8”H x 11”W, 7”H x 18”W, 7”H x 34”W, 7”H x 42”W, 12”H x 12”W, 14”H x 18”W, 14”H x 34”W, 14”H x 34”W, 14”H x 42”W
Temperature and Humidity Ratings / The Cabinet and sign components shall operate in the following temperature and humidity conditions:
  • Operational & storage temperature range: -40°F to +165°F
  • Humidity range: 0% to 99% (non-condensing)

IP/NEMA Rating / IP55/NEMA 3RX
Control / Switch or external relay
Accessories/Options / Audible Alarm, Flashing
Warranty / 5 Years
Country of Origin / Manufactured and assembled in the USA
Mounting / Lift’N Shift sign back offers built in wall mounting (single faced signs only)
Additional mounting can purchased separately: Ceiling, post, recessed

PHX Series Customization Choices

Message Options / Choose a custom font style, character size, and combination of upper and lower case letters
Graphics / Graphic symbols such as DO NOT ENTER, handicap or pedestrian; shapes such as arrows or circles
Multi-lingual Messages / Sign messages can be a single language or multi-lingual.
Double-Faced Signs / The message can be the same on both sides or different.
Visual / Audible Upgrades /
  • Piezo audible alarm, slow or fast warble alarm.
  • Flashing: an entire message or just part of a message. Flash can be set to flash on and off, alternating or a border of chasing LEDs or flashing LEDs.

Customize the Cabinet / Custom choices include: visor, custom engineered mounting, custom paint finish or color matched finish.

4985 Pittsburgh Ave., Erie, PA 16509 -- Toll-free: 877-549-9900 -- March 2018