Satellite Information Editing Guide

Part No. / Part Name / Related Product
BP-T901P / DC ACU for i-Series/s6HD / i-Series/s6HD

Document Version: #20161219-V1_0

Approval:
Approved by / Signature / Date
Document Manager / Harry Lee / Product Management / Dec.19, 2016
Global Support / Alvin Choi/ Tech Support Management / Dec. 19, 2016
Revision History:
Version / Date / Summary of Changes / Author
1_0 / Dec.19, 2016 / Initial Creation / Harry Lee

1.Purpose

The purpose of this document is to provide the guide of editing satellite information by using an Antenna Control Unit of the i-Series/s6HD to end-users.

2.How to Edit Satellite information

1)Press SETUP during the antenna is tracking.

2)Press YES to enter SETUP mode.

3)Press NEXT twice to enter edit satellite info mode.

4)Press YES to edit satellite info.

5)Set theSatellite name to edit.

PRE – Shows previous satellite name

SELECT – Select the displayed satellite for editing

NEXT – Shows next satellite name

Press ENTER to move to next screen

6)Input the satellite name –Not recommended

+ increases the value / - decrease the value

Change the underscored digit using the +/- buttons.

Press INPUT to accept the value and move to next digit.

Press BACK to move to previous digit.

7)Press ENTER to move to next screen.

Press BACK to return previous screen.

8)Input the satellite – Not recommended

+ increases the value. – decreases the value

Change the underscored digit using the +/- buttons

Press INPUT to accept the value and move to next digit.

Press Back to move to previous digit.

9)Input the tracking frequency (MHz) and symbol rete (KHz) for vertical low band.

10)Input the network ID (NID) for vertical low band.

11)Input the tracking frequency (MHz) and symbol rate (KHz) for horizontal low band.

12)Input the network ID (NID) for horizontal low band.

13)Input the tracking frequency (MHz) and symbol rate (KHz) for vertical high band.

14)Input the network ID (NID) for vertical high band.

15)Input the tracking frequency (MHz) and symbol rate (KHz) for horizontal high band.

16)Input the network ID (NID) for horizontal high band.

17)Select the Verification Method* of tracking satellite

PREV – Shows previous method

SELECT – Set the displayed method

NEXT – Shows next method

18)Select the Voltage Supply Method* to LNB. (AUTO is recommended)

19)Select the DISEQC Method*. (AUTO is recommended)

20)Press YES to save the input information.

Press NO to cancel and return to main setup mode

Please contact your local TS team should you require any further information.

APAC / EMEA / AMERICAS
Headquarters/Innovation Center / Rotterdam Office / Irvine Office
Intellian Technologies, Inc.
18-7, Jinwisandan-ro, Jinwi-myeon
Pyeongtaek-si, Gyeonggi-do
17709Korea / Intellian B.V.
Sheffieldstraat 18, 3047AP
Rotterdam,
The Netherlands / Intellian Technologies USA, Inc.
11 Studebaker
Irvine, CA 92618 USA
T +82 31 379 1000 (option 2)
/ T +31 1 0820 8655 (option 2)
/ T +1 949 727 4498 (option 2)

Global Support Team

Intellian Technologies, Inc. / Page 1 / 6
This document is proprietary to Intellian Technologies, Inc. and must be treated on a confidential basis. It may be used solely for the purposes intended by Intellian Technologies, Inc. Use or disclosure of this document, or the information contained herein, for any other purpose is not permitted without prior written authorization.