To Obtain a Professional Career Which Applies to My Education, Skills And

H. R. Baker

Objective

To obtain a professional career which applies to my education, skills and

work experience with the opportunity to contribute to the efficient

operation of a firm and to earn advancement through on job performance.

Summary

I am a goal-oriented individual that possesses professional skills with

the use and maintenance of various metals operating machines (Plasma,

Cranes. Lathe, Break-punch presses, Bead blaster, Burr bench, surface

grinders, and drills.) I also set up and operate most CNC machinery.

Work History

Aker Philadelphia

As a Machinist I set up and operated theTMC4500 Messer plasma cutter

system. I loaded steel plates using a 400 ton crane to cut steel parts

from plates to use in building Oil Tankers, Cargo Ships, Barges. This

requires extensive knowledge of the Messer system.

Abington Metal Refinery

Melter

Inspected furnace refractory lining. Charges furnace with known

material, ignites furnace and sends sample of resultant melt to Quality

Assurance Test Laboratory for immediate qualitative and quantitative

analysis. Adds alloying metals, flux, and other materials in proper

sequence during melting operation. Makes additions to metal bath and

takes such other steps as are necessary to change the content or

physical characteristics of the molten metal to bring it within

specifications. When proper analysis is achieved, adjust controls to

bring melt to pouring temperature.

National Air Conditioning and Refrigeration

Brake and Punch Press Set-Up Operator,

Plan and lay out work from blueprints, sketches, drawings, specifications

and work orders in the manufacturing of Air Conditioning and

Refrigeration Products. Set-Up and operate the Messer Plasma Cutting

Machine.

Department of the Treasury

Metal Forming Machine Operator

Duties were to monitor and coordinate the operation of normally between

five to six automatic coining presses which are stamping two to four

coins per stroke. Also performed maintenance tasks such as cleaning,

greasing and oiling of equipment. Made minor repairs such as disassembling and/or assembling feeder mechanisms. Feeder tubes, bowls or

other parts of machinery.

References: ……………………………..available upon request.