INFORMATION REQUIRED FOR QUOTATION

GENERAL INFORMATION

Date of Request:Quote Due Date:

Requested By:

Company:

Address:

Telephone:FAX: e-mail:

Contacts:

Purchasing:Telephone: e-mail:

Technical: Telephone: e-mail:

Quotation Type:

Assembly:Consignment Partial TurnkeyTurnkey

Test Type:Flying Prober Gen-Rad Functional

Thermal TestingX-Ray

Box Build:Consignment Partial Turnkey Turnkey

Quality Requirement (IPC-A-610 Class II is default standard):

Quotation Quantities:

Turn-time Desired:

PRODUCT INFORMATION

Electronic Data Preferred – See Attachments A and B

All Quotes

BOM w/part numbers, descriptions, quantities, reference designators, part types (SMT, Through-hole)

Assembly Drawing

Circuit Board Drawing (including panelization, when applicable)

Special instructions

Additional Information for Partial Turnkey/Turnkey Quotes

AVL w/approved manufacturers, manufacturer’s part numbers, preferred sources

Additional Information for All Test Quotes

CAD database

Schematics

Circuit Board (sample assembled board preferred)

Additional Information for Functional Test Quotes

Test procedure (with time required)

Specifications and space required for test equipment to be provided

Specifications for test equipment to be purchased

Additional Information for Box Build Quotes

Mechanical drawings of fabricated parts

INFORMATION REQUIRED FOR MANUFACTURING

Contacts

Documentation: Telephone: e-mail:

Engineering: Telephone: e-mail:

Purchasing: Telephone: e-mail:

Quality: Telephone: e-mail:

Assembly

1. BOM w/part numbers, descriptions, quantities, reference designators

2. AVL w/approved manufacturers, manufacturer’s part numbers, preferred sources (Turnkey parts only)

3. Spares (unpopulated locations) List

4. Assembly Drawings w/pin 1 indicated for polarized parts (5 sets, if electronic data not provided)

5. Circuit Board Drawing

6. Special Instructions and visual aids (pictures, etc)

7. Solder sample (rejected bare circuit board)

8. Pick & Place Files (SMT only)

9. Stencil data including panelization information, when applicable (SMT only)

10. Mechanical drawings of fabricated parts (Box Build only)

Test

1. BOM w/part numbers, descriptions, quantities, reference designators

2. Schematics (11” x17” copies, if electronic data not provided)

3. CAD database (Gen Rad, Flying Prober only)

4. Loaded circuit board (Gen Rad, Flying Prober only)

5. Test procedure (Functional only)

ATTACHMENT A

Electronic Data Requirements

Contact Axiom Sales or CAT Manager for data transmission instructions.

Drawing file formats: AutoCAD: ----.dwg, ----.dxf, encapsulated postscript (EPS), IGES (IGS), etc.

HP Plotter: .pol, .hpg, .plt with reference designators

Pick & Place file formats: (See Below)

Stencil data: Gerbers or circuit board solder paste layers with aperture lists

PICK & PLACE FILE FORMATS

ASCII Code, Excel or CAD data is preferred, but comma delimited, space delimited data is acceptable.

Data required for surface mount components in columnar format:

A. Part Number (Requestor’s internal part number, not the manufacturer’s part number)

Fiducial Locations using X-Y coordinates in three corners

B. Reference Designator to provide visual link to circuit board

C. X Coordinate from board datum to center of component

D. Y Coordinate from board datum to center of component

E. Rotation in Degrees

Example:

A B C D E

FIDUCIALFD1 0.050 3.730 0

FIDUCIALFD211.300 3.730 0

FIDUCIALFD3 0.400 0.230 0

25-6002-00C1 0.325 3.555 270

25-6001-00C2 2.025 3.480 270

25-6004-00C910.925 3.255 270

25-6002-00C10 1.375 0.400 270

DNIR1 7.425 1.555 270

27-1000-00R2 7.425 1.255 90

38-1029-00U1 1.725 3.330 0

ATTACHMENT B

CAD TRANSLATORS AVAILABLE
VENDOR &
SYSTEM / VERSION SUPPORTED / OUTPUT FILE EXTENSION / ID CODE / TRANSLATOR VERSION / DATE ISSUED
Accel EDA, Tango Pro Tango Series II / All / PCB / TPROGCAD / 2.9.19 / 3/26/99
Cadence/Valid Allegro / 6 to 13 / .BRD, .B
.PAD, .P
.SYM, .S
.TRE, .R / VALGCAD / 2.17.19 / 3/18/99
Calay V03, V04 / V03, V04 / .PCB / V04GCAD / 2.6.14 / 2/22/99
Calay V05/Prisma / V05, Prisma / .PCB / V05GCAD / 2.8.16 / 2/22/99
ComputerVision / 2 to 4 / .TL / THEDGCAD / 2.18.16 / 2/22/99
Theda Autoboard
DanskData DDE IPL / To Version 7 / .IPL / IPLGCAD / 2.8.16 / 2/22/99
EE Designer III / EED3 to 1.17 All EED3/E / .ALA / EED3GCAD / 2.8.16 / 2/22/99
Harris SCICARDS / 23-28 (CII 2-8) / .DAT (.CII) / CIIGCAD / 2.15.18 / 2/22/99
IBM CBDS BNR5, / 5 / .ARC / BNR5GCAD / 2.13.17 / 2/22/99
UNICAD / (.BNR)
Mentor BoardStation / 8.x / .PRT
.WIR
.CMP
.NET / MENGCAD / 2.27.20 / 5/21/99
Neutral File / All / .NF (.NET) / NEUTGCAD / 2.11.20 / 5/6/99
OrCAD/Massteck / 6 to 9 / .MIN / MASSGCAD / 2.12.16 / 2/22/99
Layout Plus
PCAD / PDIF V2 thru 8 / .PDF / PDIFGCAD / 2.20.18 / 3/12/99
PADS / All / .ASC / PAD2GCAD / 2.23.20 / 5/20/99
Protel Autotrax / AutoTrax 1.2, 1.5 / .PCB / PFWGCAD / 2.14.20 / 5/21/99
Protel for Windows / All / .PCB / PFWGCAD / 2.14.20 / 5/21/99
SPEA topCAD
Mentor Integra / All (TXF to V2) / .TXF / SPEAGCAD / 2.14.18 / 2/29/99
Teradyne/Case Vanguard / To V3.02 / .DRW / CASEGCAD / 2.6.16 / 2/22/99
Zuken Redac Cadstar
(DOS) MaxiPC / Cadstar to V7 / .CDI / CDIGCAD / 2.11.15 / 2/22/99
Zuken Cadstar
(Windows), Visula / CADIF to V4.0 / .PAF / CADFGCAD / 2.16.20 / 5/21/99
Zuken CR3000 / All / * / ZUKGCAD / 2.15.18 / 3/5/99
GENCAD / All / .CAD