UR-2 Duracure & UR-13 Duracure HS/VOC The ultimate in thin film polymeric coating systems. These aromatic, single component, moisture cure urethanes are oil free and provide outstanding abrasion and wear resistance for high traffic areas. UR-13 contains less than 420 g/l VOC's and can be used in most VOC regulated districts. Both systems conform to USDA guidelines for use in federally inspected meat and poultry plants. Floors coated with UR-2 and UR-13 maintain a high gloss finish which enhances the quality of the work place and extends the life of the floor. UR-16 Duracure HS/VOC Aliphatic UR-16 Duracure HS/VOC Aliphatic is an oil free,aliphatic moisture cure urethane coating. This single component system provides excellent resistance to ultraviolet rays and is non-yellowing for interior and exterior use. UR-16 contains less than 420 g/l VOC's and can be used in most VOC regulated districts. UR-16 is suitable for high traffic areas requiring outstanding abrasion and wear resistance. The system conforms to USDA guidelines for use in federally inspected meat and poultry plants. COLOR ADDITIVES UR-4 Color Additives A 100% solids, concentrated color additive for use in pigmenting urethanes
Technical Data Sheet UR-2 - Technical Data Sheet UR-13 - Technical Data Sheet UR-16
UR-20 Waterbased Urethane A technological breakthrough in water based urethane research. This two-component, high solids coating has a low VOC level. The key is the unique reaction chemistry allowed in water, instead of organic solvents. UR-20 exhibits superior abrasion and wear resistance as well as guards against moderate chemical spills. It rivals the high performance properties achieved with typical solvent based systems. This system conforms to USDA guidelines for use in federally inspected meat and poultry plants. COLOR ADDITIVES PR-15 WB Color Additives A concentrated, water based epoxy, color additive for pigmenting
Technical Data Sheet UR-20- Technical Data Sheet PR-15 COLOR ADDITIVES WATER BASE