MVP100/Phone.com Setup Guide
We offer these instructions to assist in configuring your InFocus device. Every SIP service provider decides what SIP features it will support. Third party SIP services may only allow audio calls. InFocus does not guarantee any functionality provided by these services.
Getting SIP Credentials for Phone.com
1) When signing up for the service, make sure to have your extensions configured as softphone extensions. (Contact Phone.com support to have this done)
2) Once you are signed up and your extensions are configured, sign-in to your Phone.com user interface https://control.phone.com/login
3) Next, simply scroll over Configure > Click on “Manage Users/Extensions” > Click on "Edit" to the right of your extensions > Click on "View Server Details" (TOP RIGHT CORNER). You will need the following SIP credentials: SIP Proxy, Username, and Password information in order to set up the MVP100.
MVP100 Setup
1) In order to sign-in to the MVP100 web interface, you will first need to know the phone’s IP address. You can find this on the “Status” screen of the phone by pressing the “Settings” hard button.
2) Once you have the phone’s IP address, open a web browser, type https:// followed by the IP address and :8443 and press enter.
3) On the next page you will click on > “Advanced” then click on > “Proceed to”.
4) An authentication box will pop-up > in the “Username” field type admin > in the “Password” field type 4321 then click the “Log In” button.
5) You will now be on the MVP100 web interface dashboard page. From here you can enter the SIP credentials you received from the Phone.com user interface by clicking the “Account” tab toward the top of the screen and then choose one of the three “Accounts”.
6) Next you will fill in the following:
a. SIP URI()
b. Username
c. Password
d. Proxy Mode(Manual)
e. Proxy Address 1(sip.phone.com)
f. Transport(UDP)
All other fields should be left empty.
7) Finally, click the blue “Save” button and you are ready to use your MVP100 with the Phone.com service.