CORRIGENDUM
Tender of “Development of Saputara Lake Periphery,Distt. Dang,”
Sr. No. / Queries / Ref. Clause No. / Clarification1 / Unless stated otherwise in the Bid Documents, the contract shall be for the whole of the works based on the Unit Rates/ Prices mentioned in bill of quantities annexed to this contract document .However the work shall be carried out according to the available fund in phased out manner without any price escalation. / Please confirm the work shall be awarded in single shot or in phased our manner /parts? / Technical BidPage-28Clause- 12.1 / Work will be awarded in single phase only.
2 / Botting Jetty / Since at site there is existing botting jetty available at same location as per tender drawing. Please confirm as provided in tender drawing the new botting Jetty is to be constructed after dismantling existing botting Jetty? / Tender Drawing / Yes that will be dismantled& New boating jetty will be constructed.
3 / Survey and Clearing of Jungle as perdrawing. Quantity 246400 Sqm / Please provide location of this 246400 Sqm area with demarcation on Google map image as it is required to send with inquiry to agencies? / BOQ Item No. 1 and 5 / Go as per tender.
4 / Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, .. / Please confirm permission tree cutting shall be take.. Employer or it is in our Scope? / BOQ Item No.3 / No measure trees will be cut.
5 / Providing and erecting 2.00 meter high temporary barricading and Scaffolding with Microfiber curtain wall at peripheral…… / Please provide details or specificationsofMicrofiber curtain wall / BOQ Item No.4 / Kindly read the tender carefully. Specifications are there.
6 / Dewatering of water body area with diesel or electrical pumping arrangement including all cost of pipe line materials labours as directed with alllifts etc.complete.(capacity of pump to be decided by the agency) Unit: Job / Since Item is to be quoted in “Job” please provides the approximate volume of water body to be dewatered with exact locations of all three jobs. / BOQ Item No.6 / Considering 50.0 m segment of retaining wall & depth of water = 2.00 mt.
Approximately Trench Dimensions:
Length – 50.0 mt.
Width – 5.00 mt.
Depth – 2.00 mt.
7 / Providing, laying and Fixing Pre-molded (Or Punning Directly at Specified location) 25mm. to 35 mm. thk. Exposed or Textured finish R.C.C. Mural or Flat-type groove designed block in any shape, style and size Incl. necessary glass, wood, rubber finish removable casting cap or cover, steel, jali required or Directed grade of R.C.C. or Cement slurry, with fixing on wall, ceiling, R.C.C., Metal by necessary cap screw, dowels, cement slurry, epoxy adhesive, fasteners, staging, shuttering, scaffolding, material, labour etc. complete in it's respected manners and directed by consultant Engineer-in-charge. / Please provide drawing for this item / BOQ Item No.70 / Detailed drawing will be issued a the time of construction only. For an idea image and closed.
8 / Providing & Fixing Heritage Style Carving in "Bansidhar Stone" including fixing with necessary joinery accessories, grouting etc. Item includes transport of stones, scaffolding, cutting & finishing of stones, polishing if require. No extra charges for cutting machines/blades etc. Complete as directed by Architect In charge. Contractor must take theapproval of stone sample &Jointing Detail drawing of Carving work from the architect/engineer in charge.Qty.: 135 Cum / Please provide the drawing for carving pattern or design for this item.
Please clarify cost of carving work is to be included in the rate?
The unit of measurement is Cum. Please confirm the 'finished stone' or 'rough stone volume before carving' shall be
considered for payment?
Also please provide the sourceagency for supply of ‘Bansidhar stone’ / BOQ Item No.73 / Detailed drawing will be issued a the time of construction only.
YES
NO
9 / Providing & Fixing Carving Parapet (Patiya Work-1' Width or Height & 4" thick) in Banshidhar Stone"including fixing with necessary joinery accessories, grouting etc. Item includes transport of stones, scaffolding, cutting & finishing of stones, polishing if require. No extra charges for cutting machines/blades etc. Contractor must take the approval of stone sample & shop drawing of Carving work from the architect/engineer in charge. Complete as directed by Architect In charge. 703 Rmt / Please provide drawing for this item. / BOQ Item No.74 / Detailed drawing will be issued a the time of construction only.
10 / Providing & Fixing "Shikhar-Samaran" & Stone Cladding on wall, Jali etc.ornamental article, with Heritage Style Carving in "Bansidhar Stone" thickness of stone shall be after nakshishall be min. 3/4"} including fixing with necessary joinery accessories, grouting etc Item includes transport of stones,scaffoldingcutting& finishing of stones, polishing if require. No extra charges for cutting machines/blades etc. Contractor must take the approval of stone sample & shop drawing of Carving work fromthe architect/engineer in charge. Complete as directed by Architect In charge. / Please provide drawing for this item. / BOQ Item No.76 / Detailed drawing will be issued a the time of construction only.
11 / Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked together through their entire length and jointed together at the ends by end locksmounted on specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push-pull operation complete but excluding the cost of hood cover and spring. (B) Shutters havind width above 3.5 M. Incl. Providing and fixing 27.5 em. lcng wire spring grade No.2 of approved make for rollingshutters. & also Incl. Providing and fixing Hood cover for rolling shutters (8) Shutters havi width 3.5 meters and above / Please provide thickness of MS Laths and Hood cover material. / BOQ Item No.101 / M-32. Rolling Shutters:
page no. 42 in general specification work booklet
12 / Providing and fixing HI-RIB-Pre-coated G.I. roofing sheet and ridges on New or existing roofs different structural roofing/sky light structures with, SDST bolts or as recommended by the manufacturer of Hi-Rib-Pre-coated G.I. & polycarbonate sheets, of approved make and design as per Architect's instructions. Whenever existing roof structure, there have to repair Structural fabrication shall be as per drawing and design and shall be measured and paid under relevant item of work.
Pleaseprovidespecification(thickness & strength) of GI roofing sheet. / Pleaseprovidespecification ofPoly carbonate sheet. / BOQ Item No.103 / Deck-mounted double dome impact modified plastic skylight unit tested in accordance with AAMA\WDMA\CSA\1101\I.S.2\A440 as required by Section 2405.5 of the International Building Code or Product must be listed on the NFRC Certified Products.
13 / Providing, fabricating and fixing STAINLESS STEEL RAILING OF AISI-304 grade using 50mm dia Stainless Steel pipe of 16 gauge, 3 nos. 16mm dia SS pipe of 16 gauge, round balustrade of 38mm with complete assembly of SS studs to house the horizontal 16mm pipes and top handrail, bend and coupler to be used as per architectural detail drawings for the railing in parapet, stair etc. includingz fabricating, hoisting, fixing in position with angle cleats, holdfast etc. in RCC or masonry in true line level and plumb, includingcomplete assembly, including matt polishing and buffing complete, including scaffolding etc. complete as directed EIC. / Since rate is to be quoted forcompleteerection/installation,please provide detailed drawing for this item. / BOQ Item No.103 / Detailed drawing will be issued a the time of construction only.
14 / Providing and laying Designer,traditional Style Sign Board and Name plate of different Size, cutting in shape by C.N.C. Water jet laser jet machine, on 12mm. thk. Imported wood, with 60 to 75 mm. wooden pillar, moulded edges plate OR 2mm. thick, 304 Grade, Platinum Finish Stainless Steel Plate with engravings alpha bate latter of size 4" with filling radium -colour (any match shade) in letters as Sample approved by Architect/ Consultant,with fixture fastening etc.. Complete. as per concept & detailed by Architect & directed by consultant/ engineer in charge. [Contractor Shall have to Submit shopdrawing at-least before 15 days of start work. / Please provide drawing.Alsoprovide typeandsource/supplier imported wood.
detailsfor imported wood. / BOQ Item No.107 / Detailed drawing will be issued a the time of construction only.
15 / Providing & laying High Tensile wire for Suspension cable of 15.7 mm dia including all Connection to fix the cables, coating over cables & PVC conduct i.e. over cables. / Please provide detailed drawings of connections,type and specification of coating required. / BOQ Item No.118 / Please follow the specification &Detailed drawing will be issued a the time of construction only.
Date Extension
The Last for submission of tender has been extended and under
i. Financial Bids -10/11/2017 up to 3:00 PM
ii. Technical Bids-13/11/2017 up to 3:00 PM
The clarifications on the pre-bid queries shall be uploaded on the website shortly. Prospective Bidders are requested to refer the website: www.gujarattourism.com for further updates.