MERG KIT ORDER FORM

MERG relies on volunteer kit packers so popular kits often go out of stock. Please order in plenty of time to ensure that you can get the kits you want.

You must order your kits before 8th September 2012 to ensure delivery at Missenden on Friday evening 12th October 2012. Orders placed after this date will incur additional postage charges and may not be delivered in time for the course.

Please complete the order form below and send to the MERG Kit Sales Manager by post or email to the address at the bottom of the form.

Your kits will be delivered to Missenden for the course where they can be collected and paid for.

Alternatively, MERG members may order kits online using the kit locker at If you order online and wish to collect your kits at Missenden, when you get to the checkout page, click on the “Collect from show” option and type “Missenden” in the Delivery instructions box. If you order online after the deadline, you must select normal delivery and Judi will endeavour to get them to you, but you risk not receiving them in time for the course, in particular if some items are out of stock.

1. Suitable for Beginners / Price / No. Reqd
Gas Lamp Twinkler / £3.10
Hector Infra-red Track Occupancy Detector / £6.60
Meter Kit, to monitor Track Current and Voltage / £6.50
SD2 Colour Light Signal Driver (4 pack) / £8.00
4 channel Servo Driver (Servo4) / £6.00
Bendy Jig (indispensable aid for electronic kit assembly) / £1.00
2. Basic to Intermediate / Price / No. Reqd
Surface Mount Gas Lamp Twinkler (surface mount starter kit) / £2.50
DCC Accessory Encoder / £9.50
DCC Accessory Decoder (Pulse) (for Seep/Peco) / £11.50
DCC Accessory Decoder (Steady State) (for Tortoises) / £9.50
Train on Track Indicator (4 pack) / £5.00
Train on Track Indicator (12 pack) / £14.50
Train on Track Indicator PSU Regulator (for those needing a split level 5v dual PSU) / £5.00
PD3 Dual Capacitor-assisted Point Motor Driver (1000uF) / £5.50
PD3 Dual Capacitor-assisted Point Motor Driver (2200uF) / £5.75
CBUS 8ch Relay/Accessory Driver (CANACC8)* / £13.50
CBUS 8ch Layout Feedback Interface (CANACE8C)* / £11.50
CBUS Experimenter’s Kit* / £7.00
CBUS computer interface (CANUSB)* / £28.50
CBUS 4ch Pulse Solenoid Point Motor Driver (CANACC4) (for Seep/Peco) / £16.50
CBUS 4/8ch Constant Point Motor Driver (CANACC5) (for Tortoise/Fulgarex) / £15.00
CBUS Mimic Panel Switch Interface (CAN_ACE3) / £12.00
CBUS Mimic Panel LED Driver (CAN_LED) / £15.00
RFID Starter Kit (includes RFID reader) / £27.50
RFID 8 channel concentrator upgrade (requires starter kit) / £5.25
Automatic Train Controller (ATC) - Basic Shuttle Kit for analogue (DC) control / £25.00
CSR4 Cab Select Relay Kit for ATC Shuttle Expansion / £18.50
SuperBloc BC3 DC block controller / £10.75
SuperBloc BC3 setting up kit / £2.00
SuperBloc C3 test jig / £23.00
  • For a first start in CBUS, we recommend a CANACC8, a CANACE8c, a CBUS experimenters kit and, if you want to use it with a computer, a CANUSB

3. Intermediate to Advanced / Price / No. Reqd
DCC Command Station (CANCMD) (Requires DCC Handset or CANUSB & computer) / £25.50
DCC Handset (uses SMT Components and requires MERG DCC Command Station) / £36.00
DCC 5A or 10A Booster (NB1B) (requires separate power supply) / £24.00
Servo Setting Box (needs a few mechanical tools in addition to electrical) / £17.50
DCC Train Detector (DTC-8) (8-channel with optional RPC I/F) / £32.00

Name …………………………………………………………………...... MERG No………..….. (if applicable)

Address ………………………………………………………………………………...... …..………..

Town………………………………………………………...... Post Code………………

Email address …………………………………...... ……@......

Please forward to:
Email:
/ Judi Rastall
MERG Kit Sales Manager
The Old Stable
2A Park Road East
Sutton on Sea
Lincolnshire
LN12 2NL