Chambers with channel......
PE-Chambers DN 500......
Pos. 1: PE-Chamber DN 500 – straight channel DN/OD 160......
Pos. 2: PE-Chamber DN 500 – straight channel DN/OD 200......
Pos. 3: PE-Chamber DN 500 – straight channel DN/OD 250......
Covers DN 500......
Pos. 1: PE-Cover DN 500, "accessible"......
Pos. 2: Cover DN 500, cl. B, without ventholes......
Pos. 3: Cover DN 500, cl. B, with ventholes......
Pos. 4: Cover DN 500, cl. D, with ventholes......
Pos. 5: Cover DN 500, cl. D, „watertight“......
PE-Chambers DN 625......
Pos. 1: PE-Chamber DN 625 – straight channel DN/OD 160......
Pos. 2: PE-Chamber DN 625 – straight channel DN/OD 200......
Pos. 3: PE-Chamber DN 625 – straight channel DN/OD 200 with 2 extra inlets 45° left and right......
Pos. 4: PE-Chamber DN 625 – straight channel DN/OD 250......
Pos. 5: PE-Chamber DN 625 – straight channel DN/OD 250 with 2 extra inlets 45° left and right......
Pos. 6: PE-Chamber DN 625 – straight channel DN/OD 250......
PE-Chambers DN 800......
Pos. 1: PE-Chamber DN 800 – straight channel DN/OD 160......
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Pos. 2: PE-Chamber DN 800 – straight channel DN/OD 200......
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Additional channel DN/OD 200......
Pos. 3: PE-Chamber DN 800 – straight channel DN/OD 250......
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Additional channel DN/OD 200......
Additional channel DN/OD 250......
Pos. 4: PE-Chamber DN 800 – straight channel DN/OD 315......
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Additional channel DN/OD 200......
Additional channel DN/OD 250......
Additional channel DN/OD 315......
Pos. 5: PE-Chamber DN 800 – straight channel DN/OD 400......
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Additional channel DN/OD 200......
Additional channel DN/OD 250......
Additional channel DN/OD 315......
Additional channel DN/OD 400......
PE-Chambers DN 1000 with access DN 625......
Pos. 1: PE-Chamber DN 1000 – straight channel DN/OD 160......
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Pos. 2: PE-Chamber DN 1000 – straight channel DN/OD 200......
Pos. 3: PE-Chamber DN 1000 – straight channel DN/OD 250/160 with 4 extra inlets 45°/90° left and right..
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Additional channel DN/OD 200......
Pos. 4: PE-Chamber DN 1000 – straight channel DN/OD 250......
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Additional channel DN/OD 200......
Additional channel DN/OD 250......
Pos. 5: PE-Chamber DN 1000 – straight channel DN/OD 315......
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Additional channel DN/OD 200......
Additional channel DN/OD 250......
Additional channel DN/OD 315......
Pos. 6: PE-Chamber DN 1000 – straight channel DN/OD 400......
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Additional channel DN/OD 200......
Additional channel DN/OD 250......
Additional channel DN/OD 315......
Additional channel DN/OD 400......
Pos. 7: PE-Chamber DN 1000 – straight channel DN/OD 500......
Pos. 8: PE-Chamber DN 1000 – straight channel DN/OD 600......
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Additional channel DN/OD 200......
Additional channel DN/OD 250......
Additional channel DN/OD 315......
Additional channel DN/OD 400......
PE-Chambers DN 1000 with access DN 800......
Pos. 1: PE-Chamber DN 1000 (access DN 800) – straight channel DN/OD 160......
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Pos. 2: PE-Chamber DN 1000 (access DN 800) – straight channel DN/OD 200......
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Additional channel DN/OD 200......
Pos. 3: PE-Chamber DN 1000 (access DN 800) – straight channel DN/OD 250......
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Additional channel DN/OD 200......
Additional channel DN/OD 250......
Pos. 4: PE-Chamber DN 1000 (access DN 800) – straight channel DN/OD 315......
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Additional channel DN/OD 200......
Additional channel DN/OD 250......
Additional channel DN/OD 315......
Pos. 5: PE-Chamber DN 1000 (access DN 800) – straight channel DN/OD 400......
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Additional channel DN/OD 200......
Additional channel DN/OD 250......
Additional channel DN/OD 315......
Additional channel DN/OD 400......
Pos. 6: PE-Chamber DN 1000 (access DN 800) – straight channel DN/OD 500......
Additional position for seamless bended channel......
Additional channel DN/OD 160......
Additional channel DN/OD 200......
Additional channel DN/OD 250......
Additional channel DN/OD 315......
Additional channel DN/OD 400......
Covers DN 625......
Pos. 1: PE-Cover DN 625, "accessible"......
Pos. 2: Cover DN 625, cl. A, without ventholes......
Pos. 3: Cover DN 625, cl. B, without ventholes......
Pos. 4: Cover DN 625, cl. B, with ventholes......
Pos. 5: Cover DN 625, cl. B, „watertight“......
Pos. 6: Cover DN 625, cl. D, without ventholes......
Pos. 7: Cover DN 625, cl. D, without ventholes, with anti clatter insert......
Pos. 8: Cover DN 625, cl. D, with ventholes, with anti clatter insert......
Pos. 9: Cover DN 625, cl. D, „watertight“......
Pos. 10: Concrete load-distribution ring......
Pos. 11: Concrete load-distribution ring with radial seal......
Pos. 12: PE-Construction site cover DN 625, „accessible“, yellow......
Covers DN 800 (for access DN 800)......
Pos. 1: PE-Cover DN 800, "accessible"......
Additional position for chambers DN 500, DN 625, DN 800 and DN 1000......
Pos. 1: Seal for external fall......
Additional position for chambers DN 800 and DN 1000......
Pos. 1: Socket for boarding aid......
Pos. 2: Grab pole for boarding aid......
Additional position......
Pos. 1: Inlet- and outlet spigot for electro fusion fitting......
Chambers with channel
PE-Chambers DN 500
Pos. 1: PE-Chamber DN 500 – straight channel DN/OD 160
PE - Chamber DN 500, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), straight channel, straight inlet DN/OD 160 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060,
berm ≥ 1/1 D, outlet spigot DN/OD 160, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.
Height difference between inlet and cover:
Pipe material to be connected:
Type: ROMOLD, or equal
Pos. 2: PE-Chamber DN 500 – straight channel DN/OD 200
PE - Chamber DN 500, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), straight channel, straight inlet DN/OD 200 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060,
berm ≥ 1/1 D, outlet spigot DN/OD 200, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.
Height difference between inlet and cover:
Pipe material to be connected:
Type: ROMOLD, or equal
Pos. 3: PE-Chamber DN 500 – straight channel DN/OD 250
PE - Chamber DN 500, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), straight channel, straight inlet DN/OD 250 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060,
berm ≥ 1/1 D, outlet spigot DN/OD 250, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.
Height difference between inlet and cover:
Pipe material to be connected:
Type: ROMOLD, or equal
Covers DN 500
Pos. 1: PE-Cover DN 500, "accessible"
PE-Cover "accessible" DN 500, round, without ventholes, incl. EPDM-seal, for direct,
shift-free assembly on PE-Chamber ID 500, construction height: 2 cm
Type ROMOLD, or equal
Pos. 2: Cover DN 500, cl. B, without ventholes
Cover class B 125, DN 500, round, according to EN 124, without ventholes, lid cast iron, lockable,for direct, shift-free assembly on PE-Chamber ID 500, construction height: 2 cm
Type ROMOLD, or equal
Pos. 3: Cover DN 500, cl. B, with ventholes
Cover class B 125, DN 500, round, according to EN 124, with ventholes, lid cast iron, lockable,with dirt trap, for direct, shift-free assembly on PE-Chamber ID 500, construction height: 2 cm
Type ROMOLD, or equal
Pos. 4: Cover DN 500, cl. D, with ventholes
Cover class D 400, DN 500, according to EN 124, with ventholes, lid cast iron, lockable, with dirt trap, for direct, shift-free assembly on road foundation, construction height: 11 cm
Type ROMOLD, or equal
Pos. 5: Cover DN 500, cl. D, „watertight“
Cover class D 400, DN 500, according to EN 124, watertight, lid cast iron, lockable, for direct, shift-free assembly on road foundation, construction height: 11 cm
Type ROMOLD, or equal
PE-Chambers DN 625
Pos. 1: PE-Chamber DN 625 – straight channel DN/OD 160
PE - Chamber DN 625, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), straight channel, straight inlet DN/OD 160 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060,
berm ≥ 1/1 D, outlet spigot DN/OD 160, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.
Height difference between inlet and cover:
Pipe material to be connected:
Type: ROMOLD, or equal
Pos. 2: PE-Chamber DN 625 – straight channel DN/OD 200
PE - Chamber DN 625, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), straight channel, straight inlet DN/OD 200 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060,
berm ≥ 1/1 D, outlet spigot DN/OD 200, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.
Height difference between inlet and cover:
Pipe material to be connected:
Type: ROMOLD, or equal
Pos. 3: PE-Chamber DN 625 – straight channel DN/OD 200 with 2 extra inlets 45° left and right
PE - Chamber DN 625, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), straight channel, with 2 extra inlets 45° left and right straight inlet DN/OD 200 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060, berm ≥ 1/1 D, outlet spigot DN/OD 200, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.
Height difference between inlet and cover:
Pipe material to be connected:
Type: ROMOLD, or equal
Pos. 4: PE-Chamber DN 625 – straight channel DN/OD 250
PE - Chamber DN 625, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), straight channel, straight inlet DN/OD 250 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060,
berm ≥ 1/1 D, outlet spigot DN/OD 250, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.
Height difference between inlet and cover:
Pipe material to be connected:
Type: ROMOLD, or equal
Pos. 5: PE-Chamber DN 625 – straight channel DN/OD 250 with 2 extra inlets 45° left and right
PE - Chamber DN 625, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), straight channel, with 2 extra inlets 45° left and right, straight inlet DN/OD 250 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060, berm ≥ 1/1 D, outlet spigot DN/OD 250, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.
Height difference between inlet and cover:
Pipe material to be connected:
Type: ROMOLD, or equal
Pos. 6: PE-Chamber DN 625 – straight channel DN/OD 250
PE - Chamber DN 625, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), straight channel, straight inlet DN/OD 315 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060,
berm ≥ 1/1 D, outlet spigot DN/OD 315, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.
Height difference between inlet and cover:
Pipe material to be connected:
Type: ROMOLD, or equal
PE-Chambers DN 800
Pos. 1: PE-Chamber DN 800 – straight channel DN/OD 160
PE - Chamber DN 800, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), monolithic construction, straight channel, straight inlet DN/OD 160 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060, berm 1/1 D, outlet spigot DN/OD 160, with corrosion-resistant steps, vertical step distance 25 cm, clear opening of cone 625 mm partly eccentric, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, bottom valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.
Height difference between inlet and cover:
Pipe material to be connected:
Type: ROMOLD, or equal
Additional position for seamless bended channel
Additional position for industrially manufactured and seamless bended channel (unspanned) from 90° to 270°
Additional channel DN/OD 160
Additional position for extra inlet DN/OD 160, level of the additional channel + ...... cm
Pos. 2: PE-Chamber DN 800 – straight channel DN/OD 200
PE - Chamber DN 800, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), monolithic construction, straight channel, straight inlet DN/OD 200 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060, berm 1/1 D, outlet spigot DN/OD 200, with corrosion-resistant steps, vertical step distance 25 cm, clear opening of cone 625 mm partly eccentric, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, bottom valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.
Height difference between inlet and cover:
Pipe material to be connected:
Type: ROMOLD, or equal
Additional position for seamless bended channel
Additional position for industrially manufactured and seamless bended channel (unspanned) from 90° to 270°
Additional channel DN/OD 160
Additional position for extra inlet DN/OD 160, level of the additional channel + ...... cm
Additional channel DN/OD 200
Additional position for extra inlet DN/OD 200, level of the additional channel + ...... cm
Pos. 3: PE-Chamber DN 800 – straight channel DN/OD 250
PE - Chamber DN 800, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), monolithic construction, straight channel, straight inlet DN/OD 250 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060, berm 1/1 D, outlet spigot DN/OD 250, with corrosion-resistant steps, vertical step distance 25 cm, clear opening of cone 625 mm partly eccentric, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, bottom valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.
Height difference between inlet and cover:
Pipe material to be connected:
Type: ROMOLD, or equal
Additional position for seamless bended channel
Additional position for industrially manufactured and seamless bended channel (unspanned) from 90° to 270°
Additional channel DN/OD 160
Additional position for extra inlet DN/OD 160, level of the additional channel + ...... cm
Additional channel DN/OD 200
Additional position for extra inlet DN/OD 200, level of the additional channel + ...... cm
Additional channel DN/OD 250
Additional position for extra inlet DN/OD 250, level of the additional channel + ...... cm
Pos. 4: PE-Chamber DN 800 – straight channel DN/OD 315
PE - Chamber DN 800, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), monolithic construction, straight channel, straight inlet DN/OD 315 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060, berm 1/1 D, outlet spigot DN/OD 315, with corrosion-resistant steps, vertical step distance 25 cm, clear opening of cone 625 mm partly eccentric, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, bottom valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.
Height difference between inlet and cover:
Pipe material to be connected:
Type: ROMOLD, or equal
Additional position for seamless bended channel
Additional position for industrially manufactured and seamless bended channel (unspanned) from 90° to 270°
Additional channel DN/OD 160
Additional position for extra inlet DN/OD 160, level of the additional channel + ...... cm
Additional channel DN/OD 200
Additional position for extra inlet DN/OD 200, level of the additional channel + ...... cm
Additional channel DN/OD 250
Additional position for extra inlet DN/OD 250, level of the additional channel + ...... cm
Additional channel DN/OD 315
Additional position for extra inlet DN/OD 315, level of the additional channel + ...... cm
Pos. 5: PE-Chamber DN 800 – straight channel DN/OD 400
PE - Chamber DN 800, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), monolithic construction, straight channel, straight inlet DN/OD 400 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060, berm 1/1 D, outlet spigot DN/OD 400, with corrosion-resistant steps, vertical step distance 25 cm, clear opening of cone 625 mm partly eccentric, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, bottom valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.
Height difference between inlet and cover:
Pipe material to be connected:
Type: ROMOLD, or equal
Additional position for seamless bended channel
Additional position for industrially manufactured and seamless bended channel (unspanned) from 90° to 270°
Additional channel DN/OD 160
Additional position for extra inlet DN/OD 160, level of the additional channel + ...... cm
Additional channel DN/OD 200
Additional position for extra inlet DN/OD 200, level of the additional channel + ...... cm
Additional channel DN/OD 250
Additional position for extra inlet DN/OD 250, level of the additional channel + ...... cm
Additional channel DN/OD 315
Additional position for extra inlet DN/OD 315, level of the additional channel + ...... cm
Additional channel DN/OD 400
Additional position for extra inlet DN/OD 400, level of the additional channel + ...... cm
PE-Chambers DN 1000 with access DN 625
Pos. 1: PE-Chamber DN 1000 – straight channel DN/OD 160
PE - Chamber DN 1000, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), monolithic construction, straight channel, straight inlet DN/OD 160 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060, berm ≥ 1/1 D, outlet spigot DN/OD 160, with corrosion-resistant steps, vertical step distance 25 cm, clear opening of cone 625 mm partly eccentric, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, bottom valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.
Height difference between inlet and cover:
Pipe material to be connected:
Type: ROMOLD, or equal
Additional position for seamless bended channel
Additional position for industrially manufactured and seamless bended channel (unspanned) from 90° to 270°
Additional channel DN/OD 160
Additional position for extra inlet DN/OD 160, level of the additional channel + ...... cm
Pos. 2: PE-Chamber DN 1000 – straight channel DN/OD 200
PE - Chamber DN 1000, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), monolithic construction, straight channel, straight inlet DN/OD 200 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060, berm ≥ 1/1 D, outlet spigot DN/OD 200, with corrosion-resistant steps, vertical step distance 25 cm, clear opening of cone 625 mm partly eccentric, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.
Height difference between inlet and cover:
Pipe material to be connected:
Type: ROMOLD, or equal
Pos. 3: PE-Chamber DN 1000 – straight channel DN/OD 250 with 4 extra inlets 45°/90° left and right
PE - Chamber DN 1000, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), monolithic construction, straight channel, with 4 extra inlets 45°/90° left and right, straight inlet DN/OD 200 with elastomer seal for a flexible connection of pipes according to EN 681-1 and DIN 4060, berm ≥ 1/1 D, outlet spigot DN/OD 200, with corrosion-resistant steps, vertical step distance 25 cm, clear opening of cone 625 mm partly eccentric, horizontal reinforcement rings to secure uplift retention, triple safety seal according to EN 681-1 and DIN 4060, valid „Allgemeine Bauaufsichtliche Zulassung“ issued by DIBT or another national certificate issued by a recognised institute and valid Certificate of Conformity.