SET Portfolio
Research Publications 2005
SET Portfolio Office 2
Aerospace, Mechanical & Manufacturing Engineering 2
Applied Sciences 15
Civil & Chemical Engineering 28
Computer Science & Information Technology 36
Electrical & Computer Engineering 46
Health Sciences 62
Mathematical & Geospatial Sciences 68
Medical Sciences 77
SET Portfolio Office
Book Chapters
Butler, M. and Chester, A. 2005, 'Spheres of influence: MOOs identity and learning communities', in E-Learning in the University: Some Constructivist Perspectives, RMIT University Press, Melbourne, pp.38-55, ISBN: 1-921166-02-9.
Gray, K., Wahr, F., Allan, G. and Radloff, A. 2005, 'E-learning and program quality: Seeing the connection', in E-learning in the University: Some Constructivist Perspectives, RMIT University Press, Melbourne, pp. 56-70, ISBN: 1-921166-02-9.
Pannan, L., van der Craats, C. and McGovern, J. 2005, 'Sustainable large scale on-line development', in E-learning in the University: Some Constructionist Perspectives, RMIT University Press, Melbourne, pp. 71-83, ISBN: 1-921166-02-9.
Radloff, A. 2005, 'Decentralised approaches to education development: Supporting quality teaching and learning from within a faculty', in Education Development in Leadership in Higher Education: Developing an Effective Institutional Strategy, RoutledgeFalmer, Abingdon, UK, pp. 72-87, ISBN: 0-415-33524.
Journal Articles
Homan, P. 2005, 'A survey of the vertebrate fauna of the Black Range, near Stawell', in Victorian Naturalist, Field Naturalists Club of Victoria, Melbourne, vol. 122, pp. 94-102, ISSN: 0042-5184
Conference Publications
Chang, R., Gray, K., Polus, B. and Radloff, A. 2005, 'Scholarly teaching practice: Ethics issues and responses in research into teaching in tertiary education', Proceedings of the 2005 Annual International Conference of the Higher Education Research and Development Society of Australasia, A. Brew and C. Asmar (ed.), Higher Education Research and Development Society of Australasia, Milperra, NSW (2005 Annual International Conference of the Higher Education Research and Development Society of Australasia).
McGovern, J. and Armstrong, L. 2005, 'Assessing the value of E-learning initiatives', The Next Wave of Collaboration, S. Whiteside (ed.), Educause Australasia, Auckland (Educause Australasia 2005).
McGovern, J. and Gray, K. 2005, 'Directions for organisation and management of university learning: Implications from a qualitative survey of student e-learning', Proceedings of the 22nd ASCILITE Conference, H. Goss (ed.), Queensland University of Technology, Brisbane (ASCILITE 2005).
Wahr, F., McAspurn, E., Hadgraft, R. and Gray, K. 2005, 'Great idea! But how do we do it? Mobilising internal networks to get innovative projects off the ground', Proceedings of the Good Practice in Practice, D. Spennemann and L. Burr (ed.), Charles Sturt University, Wagga (Good Practice in Practice - Student Experience Conference).
Aerospace, Mechanical & Manufacturing Engineering
Book Chapters
Akbarzadeh, A., Andrews, J. and Golding, P. 2005, 'Solar pond technologies: A review and future directions', in Advances in Solar Energy, Earthscan, UK, pp. 233-294, ISBN: 1-84407-244-4.
Jakovljevic, B., Kangsanant, T. and Subic, A. 2005, 'A framework for the integration of a trajectory pre-shaping technique into an advanced machine tool system', in Intelligent Production Machines and Systems, Elsevier, London, pp. 509-514, ISBN: 10-0080447309.
Subic, A. 2005, 'A lifecycle approach to sustainable design of sports equipment', in The Impact of Technology on Sport, Australasian Sports Technology Alliance, Melbourne, pp. 12-19, ISBN: 0-646-45025-5.
Journal Articles
Abu-Hijleh, B. 2005, 'Fin placement for optimal forced convection heat transfer from a cylinder in cross-flow', in International Journal of Numerical Methods for Heat and Fluid Flow, Emerald Group Publishing, Bradford, UK, vol. 15, pp. 277-295, ISSN: 0961-5539.
Andrews, J. and Akbarzadeh, A. 2005, 'Enhancing the thermal efficiency of solar ponds by extracting heat from the gradient layer', in Solar Energy, Elsevier, UK, vol. 78, pp. 704-716, ISSN: 0038-092X.
Bintoro, J., Akbarzadeh, A. and Mochizuki, M. 2005, 'A closed-loop electronics cooling by implementing single phase impinging jet and mini channels heat exchanger', in Applied Thermal Engineering, Elsevier, Oxford, vol. 25, pp. 2740-2753, ISSN: 1359-4311.
Boyle, J., Maeder, A., Bell, J., John, S. and Scott, R. 2005, 'Medical device research', in Expert Review of Medical Devices, Future Drugs, London, vol. 2, no. 1, pp. 41-45, ISSN: 1743-4440.
Cao, J., John, S. and Molyneaux, T. 2005, 'Piezoelectric-based vibration control optimization in non-linear wood and composite structures', in Smart Structures of Integrated Systems, SPIE, USA, vol. 5764, pp. 378-389, ISSN: 0277-786X.
Chen, L., Tu, J., Zhou, Y., Virahsawmy, H. and McGillivray, I. 2005, 'Computation of flow behind three side-by-side cylinders of unequal/equal spacing', in ANZIAM Journal, Australian Mathematical Society, Australia, vol. 46, pp. 672-689, ISSN: 1446-8735.
Herrmann, P. and Bil, C. 2005, 'Simulation and flight test of a temperature sensing stabilisation system', in Aeronautical Journal, Royal Aeronautical Society, London, vol. 109, pp. 167-175, ISSN: 0001-9240.
Herszberg, I., Li, H., Dharmawan, F., Mouritz, A., Nguyen, M. and Bayandor, J. 2005, 'Damage assessment and monitoring of composite ship joints', in Journal of Composite Structures, Elsevier, UK, vol. 67, pp. 205-216, ISSN: 0263-8223.
Katpradit, T., Wongratanaphisan, T., Terdtoon, P., Kamonpet, P., Polchai, A. and Akbarzadeh, A. 2005, 'Correlation to predict heat transfer characteristics of a closed end oscillating heat pipe at critical state', in Applied Thermal Engineering, Pergamon-Elsevier Science, Oxford, vol. 25, pp. 2138-2151, ISSN: 1359-4311.
Kesavan, A., Deivasigamani, M., John, S. and Herszberg, I. 2005, 'Damage criticality assessment in complex geometric structures using static stream response-based signal processing techniques ', in Smart Structures and Integrated Systems, SPIE, USA, vol. 5764, pp. 542-552, ISSN: 0277-786X.
Khantsis, S. and Bourmistrova, A. 2005, 'UAV controller design using evolutionary algorithms', in Lecture Notes in Computer Science, Springer, Heidelberg, vol. 3809, pp. 1025-1030, ISSN: 0302-9743.
Ng, E., Johnson, P. and Watkins, S. 2005, 'An analytical study on heat transfer performance of radiators with non-uniform airflow distribution', in Journal of Automobile Engineering, Professional Engineering Publishing, London, vol. 219, pp. 1451-1467, ISSN: 0954-4070.
Nguyen, M., Elder, D., Bayandor, J., Thomson, R. and Scott, M. 2005, 'A review of explicit finite element software for composite impact analysis', in Journal of Composite Materials, Sage Science Press, UK, vol. 39, pp. 375-386, ISSN: 0021-9983.
Peebles, C., Bil, C. and Drack, L. 2005, 'Intelligent data storage and retrieval for design optimsation - An overview', in Acta Polytechnica, Czech Technical University Publishing House, Prague, vol. 45, pp. 39-54, ISSN: 1210-2709.
Tian, Z., Tu, J. and Yeoh, G. 2005, 'Numerical simulation and validation of dilute gas-particle flow over a backward-facing step', in Aerosol Science and Technology, Taylor and Francis, Philadelphia, vol. 39, pp. 319-332, ISSN: 0278-6826.
Tu, J., Yeoh, G., Park, G. and Kim, M. 2005, 'On population balance approach for subcooled boiling flow prediction', in Journal of Heat Transfer, American Society of Mechanical Engineering, New York, vol. 127, pp. 253-264, ISSN: 0022-1481.
Vino, G., Watkins, S., Mousley, P., Watmuff, J. and Mavuri, S. 2005, 'Flow structures in the near-wake of the Ahmed model', in Journal of Fluids and Structures, Elsevier, Amsterdam, vol. 20, pp. 673-695, ISSN: 0889-9746.
Williams, P. 2005, 'Spacecraft rendezvous on small relative inclination orbits using tethers', in Journal of Spacecraft and Rockets, American Institute of Aeronautics and Astronautics, USA, vol. 42, pp. 1047-1060, ISSN: 0022-4650.
Williams, P. 2005, 'Aircraft trajectory planning for terrain following incorporating actuator constraints', in Journal of Aircraft, American Institute of Aeronautics and Astronautics, Reston, USA, vol. 42, pp. 1358-1361, ISSN: 0021-8669.
Williams, P. 2005, 'Optimal orbital transfer with electrodynamic tether', in Journal of Guidance, Control and Dynamics, American Institute of Aeronautics and Astronautics, Reston, USA, vol. 28, pp. 369-372, ISSN: 0731-5090.
Williams, P., Blanksby, C., Trivailo, P. and Fujii, H. 2005, 'In-plane payload capture using tethers', in Acta Astronautica, Elsevier, UK, vol. 57, pp. 772-787, ISSN: 0094-5765.
Williams, P. and Trivailo, P. 2005, 'Optimal parameter estimation of dynamical systems using direct transcription methods', in Inverse Problems in Science and Engineering, Taylor and Francis, UK, vol. 13, pp. 377-409, ISSN: 1741-5985.
Yeoh, G. and Tu, J. 2005, 'Thermal-hydrodynamic modelling of bubbly flows with heat and mass transfer', in AIChE Journal, John Wiley, Hoboken, NJ, vol. 51, pp. 8-27, ISSN: 0001-1541.
Yeoh, G. and Tu, J. 2005, 'A unified model considering force balances for departing vapour bubbles and population balance in subcooled boiling flow', in Nuclear Engineering and Design, Elsevier, Switzerland, vol. 235, pp. 1251-1265, ISSN: 0029-5493.
Conference Publications
Abanteriba, S. 2005, 'Analysis of the lubrication condition of a crosshead pin bearing of a large diesel engine', Proceedings of the 2005 American Society of Mechanical Engineering Fluids Engineering Division Summer Conference, S. Michaelides (ed.), American Society of Mechanical Engineering, New York (2005 American Society of Mechanical Engineering Fluids Engineering Division Summer Conference).
Abbas, N., Kumar, D. and McLachlan, N. 2005, 'The psychological and physiological effects of light and colour on space users', Proceedings of the 2005 IEEE Engineering in Medicine and Biology 27th Annual Conference, Y. T. Zhang (ed.), IEEE, Shanghai (27th Annual International Conference of the IEEE Engineering in Medicine and Biology Society).
Abbas, N., Kumar, D. and McLachlan, N. 2005, 'Measuring the emotional and physiological effects of light and colour on space users', Proceedings of Second International Conference on Informatics in Control, Automation and Robotics, J. Filipe (ed.), ITP Setubal, Barcelona (Second International Conference on Informatics in Control, Automation and Robotics).
Adams, R., McLachlan, N., Tomas, J. and Bil, C. 2005, 'Design improvement of components and structures', Proceedings of the ANSA & mu ETA International Congress 2005, K. Scholari (ed.), BETA CAE Systems, Kassandra, Greece (ANSA & mu ETA International Conference).
Alam, F., Subic, A. and Watkins, S. 2005, 'An experimental study of spin effects on tennis ball aerodynamic properties', Proceedings of the Impact of Technology on Sport, A. Subic and S. Ujihashi (ed.), Australasian Sports Technology Alliance, Melbourne (Asia Pacific Congress on Sports Technology).
Alam, F., Subic, A. and Watkins, S. 2005, 'Measurement of aerodynamic drag forces on a rugby ball and Australian rules football', Proceedings of the Asia-Pacific Congress on Sports Technology, A. Subic and S. Ujihashi (ed.), Australasian Sports Technology Alliance, Melbourne (Asia Pacific Congress on Sports Technology).
Alam, F., Watkins, S. and Subic, A. 2005, 'Aerodynamic efficiency and thermal comfort of bicycle helmets', Proceedings of the Sixth International Conference on Mechanical Engineering 2005, D. K. Das et al. (ed.), Bangladesh University of Engineering and Technology, Dhaka (Sixth International Conference on Mechanical Engineering 2005).
Alam, F., Watkins, S. and Zimmer, G. 2005, 'Flow measurements in the A-pillar regions of a series of idealised passenger cars', Proceedings of the Sixth International Conference on Mechanical Engineering 2005, D. K. Das et al. (ed.), Bangladesh University of Engineering and Technology, Dhaka (Sixth International Conference on Mechanical Engineering).
Alam, F., We, P., Watkins, S. and Subic, A. 2005, 'Drag measurements of a rugby ball using EFD and CFD', Proceedings of the Sixth International Conference on Mechanical Engineering 2005, D. K. Das et al. (ed.), Bangladesh University of Engineering and Technology, Dhaka (Sixth International Conference on Mechanical Engineering 2005).
Andrews, J., Doddathimmaiah, A., Ali, S. and Akbarzadeh, A. 2005, 'Solar hydrogen systems for remote area power supply from triple bottom line perspective', Proceedings of 2005 Solar World Congress - Bringing Water to the World, D. Y. Goswami et al. (ed.), American Solar Energy Society, Orlando, Florida (2005 Solar World Congress).
Atyeo, S., Sinha, A. and Young, K. 2005, 'Pre-mission analysis for helicopter emergency medical services operations', Proceedings of the 31st European Rotorcraft Forum, G. Pagnano (ed.), Agusta, Florence (31st European Rotorcraft Forum).
Atyeo, S., Sinha, A. and Young, K. 2005, 'A decision support system for pre-mission planning in helicopter emergency medical service operations', Proceedings of the 11th Australian International Aerospace Congress, M. Scott (ed.), Institution of Engineers and Royal Aeronautical Society, Australia (11th Australian International Aerospace Congress).
Atyeo, S., Sinha, A. and Young, K. 2005, 'Pre-mission analysis of helicopter emergency medical service operations: Project update', Proceedings of the 61st AHS International Annual Forum and Technology Display, C. Cesnik (ed.), Mira Publishing, St. Louis (61st AHS International Annual Forum and Technology Display).
Bayandor, J., Thomson, R., Callus, P. and Scott, M. 2005, 'Impact performance substantiation of a novel aerospace composite replacement primary structure', Proceedings of the 11th Australian International Aerospace Congress, M. Scott (ed.), Institution of Engineers, Australia and Royal Aeronautical Society, Melbourne (11th Australian International Aerospace Congress).
Bobbermien, B., Wickramanayake, V., Bil, C. and Ang, D. 2005, 'Design aspects of a wing in ground effect vehicle', Proceedings of the 11th Australian International Aerospace Congress, M. Scott (ed.), Institution of Engineers and Royal Aeronautical Society, Melbourne (11th Australian International Aerospace Congress).
Bourmistrova, A., Storey, I. and Subic, A. 2005, 'Multiobjective optimisation of active and semi-active suspension systems with application of evolutionary algorithm', Proceedings of the International Congress on Modelling and Simulation, A. Zerger and R. M. Argent (ed.), Modelling and Simulation Society of Australia and New Zealand, Melbourne (International Congress on Modelling and Simulation).
Bunting, A. and Healey, G. 2005, 'Australia's mandatory renewable energy target: Driver of institutional change?', Proceedings of the World Renewable Energy Congress 2005, M. Imbabi et al. (ed.), Elsevier, Amsterdam (World Renewable Energy Congress 2005).
Cao, J., John, S. and Molyneaux, T. 2005, 'Computer modelling and simulation of passive piezoelectric vibration shunt control', Proceedings of the 2005 International Conference on Modelling Simulation and Visualization Methods, H. Arabnia (ed.), CSREA Press, Irvine, CA (2005 International Conference on Modelling, Simulation and Visualization Methods).
Carn, C. and Trivailo, P. 2005, 'Inverse determination of aerodynamic loading from structural response data using neural networks', Proceedings of the Inverse Problems, Design and Optimization Symposium, M. J. Colaco et al. (ed.), e-Papers Publishing House, Rio de Janeiro (Inverse Problems, Design and Optimization Symposium).
Chang, P., Harris, E., Kootsookos, A., Cox, B. and Mouritz, A. 2005, 'Improved elevated temperature properties of z-pinned composite lap joints', Proceedings of the Fourth Australasian Congress on Applied Mechanics, M. Xie et al. (ed.), Institute of Materials Engineering Australasia, Melbourne (Fourth Australasian Congress on Applied Mechanics).
Charlesworth, S., Kusumo, R., Sinha, A. and Atyeo, S. 2005, 'Helicopter emergency medical service crew capability evaluation: Issues and challenges', Proceedings of the 61st AHS International Annual Forum and Technology Display, C. Cesnik (ed.), Mira Publishing, St Louis (61st AHS International Annual Forum and Technology Display).
Charlesworth, S., Kusumo, R., Sinha, A. and Atyeo, S. 2005, 'Crew capability evaluation for helicopter emergency medical service operations', Proceedings of the 31st European Rotorcraft Forum, G. Pagnano (ed.), Agusta, Florence (31st European Rotorcraft Forum).