RC Display / Recording

Binocular Video Glass

Operating Instructions

Thanks for choosing this product, please read the manual carefully before using.

Contents

一、Graphic Instruction

二、Packing Contents

三、Graphic Installation

四、Operation

Power Switch: Click to start, long press about 3sec to stop

Menu:Long press above 3sec., Setting menu or Exit menu will display in the screen;

Upward, Rightward: Under menu mode, upward button means upward, rightward button means rightward;

Under preview mode, using upward /rightward button to switch the picture.

Downward, Leftward: Under menu mode, downward button means downward, leftward button means leftward;

Under preview mode, using downward / leftward button to switch between auto search

frequency & manually search frequency.

Replay: Replay (play) the video in SD card. Press replay button to enter into replay mode, press direction button to choose the video you need, then confirm.

Recording: Click recording button, there will be a red spot on the upper left corner

USB Port: Data transmission, 5V power supply, AV output, AV input

SD Card Port: Insert SD card to be storage medium of recording

I．Graphic Instruction

Multi-function USB Port

Power 电源

Menu 菜单

Confirm 确认

Recording 录像

Up/down, left / right / Auto Search/ Video Switching

II．Packing Contents

Main Unit: 主机

Antenna: 天线

USB Cable: USB线

Manual: 说明书

SD Card Port

Install myopic lens (Can be customized in the optician’s, size ref. as below)

III．Graphic Installation

  1. Install SD Card
  1. Insert the SD card to the slot
  1. Install Battery
  1. Connecting 3S or 4S battery with data cable, then connect data cable to the USB port of goggle glass.
  1. Install Antenna
  1. Can be installed with RP-SMA vectoredantenna or omni antenna
  1. Video Switching
  1. Short press upward button, the system will switch between two receivers and AV in, cycling in R1-R2-AV in;
  2. Click downward button, you can choose to switchreceiver automatically (meanwhile the system will choose the receiver with best signal) or switch receiver manually.
  1. Recording
  1. Click recording button, the system will start to record, the preview interface will appear recording icon and time.

IV. Operation

  1. Power On / Off
  1. When finishing the steps above, short press power button, the screen light on, then power on;

Long press power button above 3sec., the screen extinguishes, then power off.

  1. Searching Frequency
  1. When power on, receiving images by auto search or manually set frequency.

Auto. Search: long press “OK” button, the system starts to search frequency automatically, and then it will hint “save the channel or not” after finding the frequency; Short press “M”button to save it. Long press “OK” button when needed, the system will start to search again.

录像时间：Recording Time

电量：Power

正在使用的接收机：Receiver

剩余容量：RAM Remain

开启自动搜索：Turn on Autosearch

  1. Menu Settings
  1. Long press “M” button to enter into Menu setting, short press “OK”button to confirm modify or not; Short press “up” and “down” button to choose which need to modify, press “OK” button to confirm; long press “M” button to exit.

Frequency

OSD

Video System

Lightness

Contrast

Saturation

  1. Replay
  1. Short press “OK” button, enter into replay mode. Choose the files with the left and right button, short press “OK” button to replay;Meanwhile, using left or right button to control fast backward and fast forward; then press “OK” button to pause, long press “M” button t exit.

Specification

Display

Resolution: 854*480(WVGA)

Lightness: Adjustable

Contrast: Adjustable

Saturation: Adjustable

View Angle: 30°（horizontal）

Receive

Antenna Port: RP-SMA

Frequency: 5.8G Dual diversity input, 32channel can be chosen, auto switch to the best signal channel

Auto Search: Yes

Recording

Video: 640x320 (30FPS)

Storage: SD Card (up to 32G)

Size: 172*88*60mm

Weight: about 142g

Power: DC 5V/1A

Power Consumption: 950mA @ 5V (Maximum)

Working Environment: -10°C~+65°C