Page Label - LRFD (Right Column)
http://onramp.dot.ca.gov/hq/esc/sd/bridge_design/lrfd.shtml
Load and Resistance Factor Design(WORD Documents)
· LRFD Training - Link to “Structure Design Training Center” Page
http://onramp.dot.ca.gov/hq/esc/sd/sd_training_center.shtml
o LRFD Introduction
o LRFD - Loads
o AASHTO LRFD - Analysis
o AASHTO LRFD - Slab Bridge Design
o LRFD - Deck Slab and Overhang
o LRFD - Concrete Design
o LRFD - Prestressed Box Girder
o LRFD - Bent Caps
§ Part1
§ Part2
§ Part3
· Bridge Design Practice Using LRFD
Link to “Bridge Design Practice Manual (Draft)” Page
http://onramp.dot.ca.gov/hq/esc/sd/bridge_design/sac/BridgeDesignPracticeManualReview2009.htm
o Chapter 1 "Getting Started"
o Chapter 2 "Loads"
o Chapter 3 "Structural Analysis"
o Chapter 4a "Concrete"
o Chapter 4b "Prestressed I-girder Example"
o Chapter 4c "Post-tensioned Box Girder Example"
o Chapter 5 "Steel"
o Chapter 6 "Substructures"
o Chapter 7 "Walls"
o Chapter 8 "Bearings"
o LRFD Quickguide
o LRFD reference list
· CA Amendments to AASHTO LRFD, December 2008
(PDF files)
o Implementation Memo
o Preface
o Section 1 "Introduction"
o Section 2 "General Design and Location Features"
o Section 3 "Loads and Load Factors"
o Section 4 "Structural Analysis and Evaluation"
o Section 5 "Concrete Structures"
o Section 6 "Steel Structures"
o Section 9 "Decks and Deck Systems"
o Section 10 "Foundations"
o Section 11 "Abutments, Piers and Walls"
o Section 12 "Buried Structures and Tunnel Liners"
o Section 13 "Railings"
o Section 14 "Bearings & Joints
· Technical Background Forms for CA Amendments, December 2008
(PDF Files)
o Section 1 "Introduction - 1.3"
o Section 2 "General Design and Location Features"
o Section 3 "Loads and Load Factors"
o Section 4 "Structural Analysis and Evaluation"
o Section 5 "Concrete Structures"
o Section 6 "Steel Structures"
o Section 9 "Decks and Deck Systems"
o Section 10 "Foundations"
o Section 11 "Abutments, Piers and Walls"
o Section 12 "Buried Structures and Tunnel Liners"
o Section 13 "Railings
· Contact Us