Lesson Plan PTT 105 /3 Sem II 2011/2012

UNIVERSITI MALAYSIA PERLIS (UniMAP)

Pusat Pengajian Kejuruteraan Bioproses

COURSE OUTLINE

(1) Kod kursus/ Course code: PTT105
(2) Tajuk kursus/ Course title: Grafik Kejuruteraan / Engineering Graphics
(3) Nilai unit/ Number of unit: 3
(4) Jenis kursus/ Course type: Teras/ Core
(5) Prasyarat/ Prerequisite: NIL
(6) Sinopsis kursus/ Course synopsis:
This course discusses the practice of technical drawing such as drafting and modeling which cover the 2-D and 3-D geometry related to drafting and design of mechanical and structural components and/or systems by using the AUTODESK’s AutoCAD software.
(7) ) Hasil Pembelajaran / Learning Outcomes:
At the end of the course, students are expected to be:
1.Ability to apply geometric construction techniques for engineering drawings.
2.Ability to apply completes 2-D and 3-D drawings pertaining to geometric transformations, projections and multiple views.
3.Ability to apply curve, surfaces and geometric models.
(8) Senarai eksperimen yang mungkin/ List of possible experiments:
Lab 1: To Introduce Autodesk CAD
Lab 2: To construct CAD 2-D Transformation and Projection I and II
Lab 3: To construct CAD 3-D Transformation and Projection I and II
Lab 4: To construct CAD Multiple Views I and II
Lab 5: To construct CAD Curves and Surfaces I and II
Lab 6: To construct CAD Geometric Models I and II
Lab 7: To construct CAD Pipe Structures
Lab 8: To construct CAD Fermenter Models I and II
(9) Pendekatan pembelajaran/ Learning approach:
(i)Lectures: 14 hours
(ii)Computer Lab : 84 hours
(10) Sumbangan penilaian/ Evaluation contribution:
(i)Peperiksaan/ Examination: 40%
  • Mid-Term Examination 1 = 20%
  • Mid-Term Examination 2 = 20%
(ii) Kerja kursus/course work: 60%
  • Design Project = 30%
  • Assignments = 20%
  • Quizzes = 10%
(Kuiz boleh diberi tanpa notis)
(11) Pensyarah dan Pegawai Latihan Vokasional/Lecturers and Teaching Engineers
Lecturer
  1. Miss Nor Helya Iman Bt Kamaludin
PLVs
  1. Mr. Md Nabil Ab Adzim Bin Saifuddin
  2. Miss Hafizah Bt Johar

(12) Senarai buku teks dan rujukan/ List of text books and references: (Dahulukan dengan rujukan yang utama/ list main texts/references first)
  1. Ibrahim Zeid. (2010). CAD/CAM Theory and Practice, McGraw Hill International. New York.
  2. James R. C. (2005). Chemical Process Equipment: Selection and Design. Gulf
Professional Publishing. Texas
  1. Calmettes J.M. (2005). Best of 3D Virtual Product Design. Page One Publishing Pte. Ltd. Singapore.
  2. Dnaher S.(2004). The Complete Guide to Digital 3D Design. ILEX. Cambridge.
  3. Hannah B.(2004). Becoming a Product Designer. John Wiley and Sons. New York.
  4. Ullman D.G. (2003). The Mechanical Design Process. 3rd ed. McGraw-Hill. New York.

Rancangan mengajar/Lesson plan

Minggu/Week / Kandungan Kursus / Course Contents
(Panduan/Guidelines) / Pensyarah/Lecturer
Week 1
(20 Feb-24 Feb) / Overview of computer aided design and analysis
Introduction of history, characteristics, functions and applications in CAD.
(1 hour) / Miss Nor Helya Iman
Lab 1: To Introduce Autodesk CAD
(6 hours) / Miss Nor Helya Iman
Mr Md Nabil Ab Adzim
Miss Hafizah
Week 2-3
(27 Feb-9 March) / Geometric Transformation and Projection
2-D transformation and projections of engineering drawing.
(2 hours) / Miss Nor Helya Iman
Lab 2: To construct CAD 2-D Transformation and Projection I
and II
(12 hours) / Miss Nor Helya Iman
Mr Md Nabil Ab Adzim
Miss Hafizah
Week 4-5
(12 March- 23 March) / Geometric Transformation and Projection
3-D geometric transformation and projections of an engineering drawing
(2 hours) / Miss Nor Helya Iman
Lab 3: To construct CAD 3-D Transformation and Projection I and II
(12 hours) / Miss Nor Helya Iman
Mr Md Nabil Ab Adzim
Miss Hafizah
Week 6-7
(26 March-6 April) / Multiple Views
2-D and 3-D generation of multiple views of an engineering drawing.
(2 hours) / Miss Nor Helya Iman
Lab 4: To construct CAD Multiple Views I and II
(12 hours) / Miss Nor Helya Iman
Mr Md Nabil Ab Adzim
Miss Hafizah
Week 7
(2 April- 6 April) / MID-TERM EXAMINATION 1
Week 8
(9 April-13 April) / CUTI PERTENGAHAN SEMESTER/MID-TERM BREAK
Week 9-12
(16 April- 11 May) / Curves and Surfaces and Geometric Modeling
Geometric features; curves, splines, surfaces and geometric solid modeling in engineering drawing.
(4 hours) / Miss Nor Helya Iman
Lab 5:To construct CAD Curves and Surfaces I and II
(12 hours)
Lab 6: To construct CAD Geometric Models I and II
(12 hours) / Miss Nor Helya Iman
Mr Md Nabil Ab Adzim
Miss Hafizah
Week 13
(14 May-18 May) / Industrial Process Piping
2-D and 3-D generation of multiple views for industrial process piping.
(1 hour) / Miss Nor Helya Iman
Lab 7:To construct CAD Pipe Structures
(6 hours) / Miss Nor Helya Iman
Mr Md Nabil Ab Adzim
Miss Hafizah
Week 14-15
(21 May- 1 June) / Structural Engineering Design and Drafting
2-D and 3-D generation of multiple views for fermenters in bioreactor design. Application of CAD in industrial biotechnology.
(2 hours) / Miss Nor Helya Iman
Lab 8: To construct CAD Fermenter Models I and II
(12 hours) / Miss Nor Helya Iman
Mr Md Nabil Ab Adzim
Miss Hafizah
Design Project Presentation
Week 15
(28 May- 1 June) / MID-TERM EXAMINATION 2
Week 16
2 June-10 June) / MINGGU ULANGKAJI / REVISION WEEK
Week 17-19
11 June -22
June) / PEPERIKSAAN AKHIR SEMESTER / FINAL EXAMINATION