Geometry 2012 – 2013Name ______
1st Semester Exam Review Answers
I. Definitions
- conjecture – an educated guess based on known information
- segment - a measurable part of a line that consists of 2 endpoints and all of the points between them
- ray –a segment that continues on in one direction
- postulate –a statement that is accepted as true without proof
- acute angle –an angle whose measure is less than 90
- right angle – an angle whose measure is exactly 90
- obtuse angle – an angle whose measure is more than 90
- straight angle – an angle whose measure is exactly 180
- segment bisector – a segment, line, or plane that intersects a segment at its midpoint
- angle bisector – a ray that divides an angle into two congruent angles
- vertical angles – two nonadjacent angles formed by two intersecting lines
- complementary angles – two angles whose sum is 90
- supplementary angles – two angles whose sum is 180
- counterexample – an example used to disprove a statement
- linear pair – a pair of adjacent angles that form a line
- converse – the statement formed by switching the hypothesis and conclusion of a conditional statement
- inverse – the statement formed negating the hypothesis and conclusion of a conditional statement
- contrapositive – the statement formed by switching and negating the hypothesis and conclusion of a conditional statement
- perpendicular lines – lines that intersect to form right angles
- parallel lines – lines that do not intersect
- skew lines – lines that do not intersect and are not the same plane
- transversal – a line that intersects two or more lines at different points
- alternate interior angles – a pair of interior angles that are on opposite sides of the transversal
- alternate exterior angles – a pair of exterior angles that are on opposite sides of the transversal
- consecutive interior angles – a pair of interior angles that are on the same side of the transversal
- midpoint – the point on a segment exactly halfway between the endpoints of a segment
- isosceles triangle – a triangle with at least two sides congruent
- right triangle – a triangle with a right angle and two acute angles
- obtuse triangle – a triangle with an obtuse angle and two acute angles
- acute triangle – a triangle with all 3 angles acute
- scalene triangle – a triangle with no sides congruent
- equilateral triangle – a triangle with all 3 sides congruent
- polygon – a closed figure
- perpendicular bisector – a segment that is perpendicular to a side of a triangle at the midpoint
- concurrent lines – three or more lines that intersect in the same point
- circumcenter – the point of concurrency of the perpendicular bisector of a triangle
- incenter – the point of concurrency of the angle bisectors of a triangle
- median – segment whose endpoints are a vertex and the midpoint of the opposite side
- centroid – the point of concurrency of the medians of a triangle
- altitude – a perpendicular segment drawn from a vertex to the opposite side
- orthocenter – the point of concurrency of the altitudes of a triangle
- convex – a polygon whose sides do not cave in
- concave – a polygon whose sides cave in
- regular – a polygon that is equiangular and equilateral
- parallelogram – a quadrilateral with both pairs of opposite sides parallel
- rhombus – a parallelogram with 4 congruent sides
- square – a parallelogram with 4 congruent sides and 4 right angles
- rectangle – a parallelogram with 4 right angles
- trapezoid – a quadrilateral with exactly one pair of parallel sides
- isosceles trapezoid – a trapezoid whose legs are congruent
II. Quadrilateral Properties
Parallelogram / Rectangle / Rhombus / Square50. Opposite sides are parallel. / X / X / X / X
51. Opposite sides are . / X / X / X / X
52. Opposite angles are . / X / X / X / X
53. Consecutive interior angles supplementary. / X / X / X / X
54. Diagonals bisect each other. / X / X / X / X
55. All 4 angles are right angles. / X / X
56. Diagonals are . / X / X
57. All 4 sides are . / X / X
58. Diagonals bisect opposite angles. / X / X
59. Diagonals are . / X / X
III. Proofs
Given: AB = BC
Prove: ½ AC = BC
Statements / Reasons1. AB = BC / 60. Given
2. AC = AB + BC / 61. Segment Addition
3. AC = BC + BC / 62. Substitution
4. AC = 2 BC / 63. Substitution
5. ½ AC = BC / 64. Multiplication/Division
Given: 1 and 3 are a linear pair 1 3
2 and 3 are a linear pair 4 2
Prove: m1 = m2
Statements / Reasons1. 1 and 3 are a linear pair
2 and 3 are a linear pair / 65. Given
2. 1 and 3 are supplementary
2 and 3 are supplementary / 66. Supplement Thm
3. m 1 + m 3 = 180
m 2 + m 3 = 180 / 67. Def of Supplementary Angles
4. m 1 = m 2 / 68. Congruent SuppThm
Given: AB BC
ABC is bisected by BD
Prove: ∆ABD ∆CBD
Statements / Reasons1. AB BC / 1. Given
69. ABD = CBD / 2. Definition of Bisector
3. BD BD / 70. Reflexive
4. ∆ABD ∆CBD / 71. SAS
Given: ∆DGC ∆DGE, ∆GCF ∆GEF
Prove: ∆DFC ∆DFE
Statements / Reasons1. ∆DGC ∆DGE, ∆GCF ∆GEF / 1. Given
2. CDG EDG; CD ED; CFD EFD / 72. CPCTC
3. ∆DFC ∆DFE / 73. ASA
IV. Problems
Find the measure of each variable.
74. x = 6875. y = 12076. x = 24
Find the measure of each angle.
77. 178. 279. 380. 481. 5
59 78 102 22 68
82. 6
34
Determine whether the following triangles are congruent. (SSS, SAS, ASA, AAS, cannot be determined)
83. ASA84. CBD85. CBD
Use the conditional statement to identify the following.
If an angle measures less than 90, then it is an acute angle.
86. Hypothesis: an angle measures less than 90
87. Conclusion: it is an acute angle
88. Converse: If an angle is an acute angle, then it measures less than 90.
89. Inverse: If an angle does not measure less than 90, then it is not an acute angle.
90. Contrapositive: If an angle is not an acute angle, then it does not measure less than 90.
G is the centroid of ABC, AD = 15, CG = 13 and AD CB.
91. Find the length of AG. 10
92. Find the length of GD.5
93. Find the length of GE.6.5
94. Find the length of GB.13
List the angles of the triangle in order from least to greatest.
95. I, G, H96. L, K, J
Find the possible measures for the third side of XYZ.
97. XZ = 6, YZ = 898. XZ = 9, YZ = 5
2 < x < 14 4 < x < 14
Use the figure below to determine if the segments are parallel, skew, or perpendicular.
99. AB and AHperpendicular
100. EF and ACskew
G
101. DF and BGparallel
F
CD
Use the figure to identify the special angle pair. (alt. int., alt. ext., cons. int., corr., linear pair)
102. 1 & 8alternate exterior
103. 5 & 6linear pair
104. 2 & 6corresponding
105. 4 & 5alternate interior
106. 4 & 6consecutive interior
Find the value of the variables.
107. x = 20108. x = 26.4
Use the diagram to answer the following questions.
109. Name a point collinear to K. M, L, or R
110. Name a point coplanar to P.O, M, N, Q, R, or L
111. x = 35, y = 50112. x = 31, y = 11113. x = 16, y = 10
Find the missing measure(s) for the given trapezoid.
114. For trapezoid ADFC, B and E are 115. For trapezoid WXYZ, P and Q are
midpoints of the legs. Find AD. midpoints of the legs. Find WX.
AD =58WX = 5
116. For trapezoid DEFG, T and U are 117. For isosceles trapezoid QRST, find
midpoints of the legs. Find TU, mE. AB, mQ, and mS.
mG.
TU = 28, mE = 95, mG = 145 AB = 42.5, mQ = 125, mS = 55
PRST is a rectangle. Find each measure if m1 = 50.
118. m2 = 40119. m3 = 40120. m4 = 50
121. m5 = 100122. m6 = 40123. m7 = 80
124. ABCD is a rectangle. If AD = x2 – 7 and BC = 4x + 5, find AD.
x = -2 or x = 6
AD = 29