احتياجات قسم هندسة الحاسوب

Item # / Title / Specification / Qty
1 / Microcontroller Trainer Kit Specifications /
  • System that supports over 8-, 14-, 18-, 20-, 28- and 40-pin PIC MCUs.
  • A hardware tool designed for testing and debugging programs on PIC microcontrollers.
  • Allows PIC microcontrollers to be interfaced with a wide range of peripheral modules.
  • On-board 16-bit I/Oport expanderMCP23S17 that uses SPI communication.
  • RS-232 communication with a PC or a microcontroller is performed via DB9 connector.
  • System can be configured by means ofDIP switches. Each DIP switch configures one part of the system.
  • On-board Digital thermometer
  • System provides support for MCUs inDIP8, DIP14, DIP18, DIP20, DIP28andDIP40packages. Must come with aPIC16F877A.
  • Potentiometers used for testing multiple A/D conversions. Inputs can be configured via jumpers.
  • USB or externalpower supply sourceis selected by moving a jumper.Power supplyswitchturns the system on/off.
  • 2x16 characterCOG Displayis used for displaying text messages. It is connected to the system via SPI.
  • All microcontroller pins are connected to theIDC10 connectorsfor further expansion.
  • LEDs(Light Emitting Diodes) are used to indicate the logic states of all microcontroller pins.

Multiplexing seven segment LED displays

  • LED dot matrix display
  • On-board jumpers are used forpull-uporpull-downport configuration. They are available for all pins.
  • Push buttonsare used to excite microcontroller digital inputs. They are connected to all microcontroller pins.
  • DIP switchis used to separate port pins from pull-up/pull-down resistors.
  • Very fastUSB 2.0 programmerwithmikroICDsupport. There is no need for connecting the external programmer
LCDcan be easily connected via the on-board connector that is also connected to MCU pins.
LCD Contrast Potentiometer used for adjusting LCD contrast.
External power supplycan be either DC or AC. The on-board jumper is used for selecting external power supply.
Quartz Crystalis replaceable. The MCU pins can be configured via jumpers as oscillator inputs or regular I/O pins.
Graphic LCD 128x64can be easily connected to the board via the appropriate connector. It is connected to MCU pins.
Voltage levelto be applied when a button is pressed (GND or +5V) is selected via the on-board jumper.
USB communication connectorenables you to connect your microcontroller with a PC via USB interface.

Inter-Integrated Circuit (I2C) communication

Reset circuitis used to reset the microcontroller. It is connected to theMCLR pinof the microcontroller.
PS2 connectorenables the development system to be directly connected to a PS/2 device such as keyboard or mouse.
4x4 Keypadallows efficient entry of numeric data and other characters as well.
Menu Keypadenables easy and fast menu browsing for your prototype device.
Port Expanderenables you to add more inputs or outputs to your prototype device.
Kit must include:
  • mikroBasic PRO for PIC compiler with USB Dongle Licence
  • SmartPROTO Board
  • EasyConnect Board
  • Character LCD 2x16 with blue backlight
  • DS1820 Temperature Sensor
  • Graphic LCD 128x64 with TouchPanel
  • Serial Cable
  • USB cable
  • Printed manuals
  • DVD with software, drivers, board and examples
Accessories must be included:
  • Storage boards support various memory standards such as MMC/SD, Compact Flash, EEPROM, etc. Whether you need to store just configuration data, or a large amount of information, these boards are the best choice for you.
  • Add reliable timer, alarm and real-time clock functionality to your application. Let these boards take care of it, so you can exploit your microcontroller’s precious clock cycles on something more important.
  • Display boards provide easy-to-use interfaces for LCD, GLCD and TFT displays of various sizes.
  • Data acquisition is a critical task for various embedded applications where monitoring and control is needed. Measurement boards are ideal solutions for converting data from analog to digital world and versa-visa.
  • RFid readers, relays, motion sensors, stepper motor drivers, DC motor drivers, Servo motor drivers and lot of other boards .
  • Audio & Voice Boards enable you to easily add audio features to your prototype device.
  • power supply control boards, such as regulators, translators, etc., that can be used for various electronic applications.
-Components must be included :-(10 pieces for each):
  1. 293D (H-bridge)
  2. L297
  3. L298 motor driver
  4. L6026 driver
  5. ULN2003A driver
  6. LM35 temperature sensor
  7. UCN5804B
  8. MAX232
  9. FT232BM(USB232)
/ 10

ُEU .USAالمنشأ

1