PREISLISTE und

Technical Data Sheet

rev.1 of 03/01/00

Upholstered Furniture/Mattress Manufacturing

BAMATEX d.o.o.

Linhartova c. 07, 1234 Mengeš, Slovenija,

tel: ++386 1 7296 173, 7296 174 ,

fax:++ 386 1 7296 175

E mail:

www.bamatex.si

PRODUCT RESPAN KE/40

Fields of Use...... Thermoplastic adhesive spray application specific for gluing foamed polystyrene, polyether and polyurethane to themselves, to wood, cork, fabric, lap, glass fibre and similar materials. Product used in the upholstered furniture industry and in the manufacture of mattresses. The main characteristics of the product are: a strong tack, a high heat resistance and a higher yield due to a low specific weight.

Base...... Synthetic rubber and resin in a solution of solvents. Product manufactured in accordance with the applicable laws in force.

Colour...... Transparent or red coloured (on request) Viscosity...... 350 mPas Brookfield (+/-25) at 20°C Specific weight...... 0,83 gr/cc (+/-0,02) Category...... Inflammable

Application Tools ...... Spray gun with a nozzle having a diameter of 1,7/1,9 mm and an air pressure of no less than 4/5 atm. Sprayed with a dual-diaphragm or immersion pump.

Method of Use ...... Make sure that the materials to be glued are clean and do not present traces of dust or residues of other processes; spray a uniform coat of adhesive on both surfaces from a distance of about 50 cm, wait for a minimum of 1 minute to a maximum of 15 minutes and then join the surfaces and press them together.

Storage ...... About 6 months in the sealed original package at room temperature

(+10°/+40°C).

Packages...... Cans, barrels and tanks with a net weight of 20/50 kg, 170 kg and 850 kg, respectively.

Warnings……………….... As Respan KE/40 is not compatible with other products, we recommend the spraying systems be washed before use.

Store the product in a heated room during the winter. Remix before use.

2. SILIKONSPRAY
For easier slide the leaether on foam or
synthertic wadding
/