JS Air Curtains Venesse
Air Curtain Specification Summary
1. The Air Curtain shall have a self-supporting casing finished in RAL 9010 as standard. Other RAL colours shall be available on request.
2. The Air Curtain shall use low noise centrifugal double inlet fans.
3. The fans shall be capable of 3 speed selections.
4. The Air Curtain shall be available in a single size nominally 2.5m high.
5. The Air Curtain shall measure 606mm wide and 300mm deep including intake grille.
6. The unit shall be suitable for exposed mounting vertical to one or both sides of a door using base plate included.
7. The inlet grille shall be perforated with filter function. For servicing, in normal environments, the grille only has to be periodically wiped or vacuumed.
8. The Air Curtain shall be available with a choice of water, electric heating or ambient unheated.
9. Electrically heated units will use 400V 3 phase with power controls included. There shall be a choice of 2 heater batteries, standard “E” or increased “F” both with 2 stage control.
10. The Air Curtain shall include a “DM” manual controller, 5m of telephonic cable with (Plug & Play) connectors. Longer control cables shall be available on request.
11. The controller shall be capable of BMS/PLC/Timer etc. enable and disable by a suitable volt free contact.
12. Electrically heated units shall be capable of accepting a thermostat connection which will stop the unit.
13. Water heated units shall have the option of an external solenoid valve. The solenoid valve shall be switched by an independent thermostat.
14. The system is to be supplied by:
JS Air Curtains
Member of the Condair Group
Artex Avenue
Rustington
LITTLEHAMPTON
West Sussex
BN16 3LN
Tel: +44 (0) 1903 858 656 Fax: +44 (0) 1903 850345
e-mail: website: www.jsaircurtains.com
JS Air Curtains Venesse Specification Summary V1.10 22/9/15