SECTION 14 20 00
ELEVATORS AND DUMBWAITERS
Display hidden notes to specifier. (Don't know how? Click Here)
Copyright 2016 - 2016 ARCAT, Inc. - All rights reserved
** NOTE TO SPECIFIER ** Nationwide Lifts, Inc. ; residential/commercial elevators and lifts.
This section is based on the products of Nationwide Lifts, Inc. , which is located at:
10-B Holden Ave.
Queensbury, NY 12804
Toll Free Tel: 888-323-8755
Email: request info ()
Web: www.elevators.com
[ Click Here ] for additional information.
Nationwide Lifts has the most complete and innovative product line in the industry. We strive to develop new products and partnerships, giving homes and businesses exactly what they need. With our network of offices and affiliates, Nationwide Lifts is capable of fulfilling your elevator needs anywhere in North America!
PART 1 GENERAL
1.1 SECTION INCLUDES
** NOTE TO SPECIFIER ** Delete items below not required for project.
A. Dumbwaiters. (Jeeves, Jeeves Pro, Jeeves Pro RST)
B. Residential Elevators. (Freedom Green, Freedom Hydro, Freedom Elite, Visilift 48 Octagonal, Visilift® 58 Round)
C. Limed-Use, Limited Access (LULA) Elevators. (Freedom LULA)
1.2 RELATED SECTIONS
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
A. Section 03 30 00 - Cast-in-Place Concrete.
B. Section 06 10 00 - Rough Carpentry.
C. Section 08 11 00 - Metal Doors and Frames.
D. Section 09 21 16.23 - Gypsum Board Shaft Wall Assemblies.
E. Section 09 60 00 - Flooring.
F. Section 28 36 33 - Water Detection Sensors.
G. Division 16 - Electrical for electrical service and disconnects, wire routing and connections, telephone service.
1.3 REFERENCES
** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
A. ANSI/ASME A17.1/CAN/CSA B44 - Safety Code for Elevators and Escalators.
B. ANSI/NFPA 70 - National Electric Code.
C. ANSI/NFPA 80 - Fire Doors and Windows.
D. ANSI/UL 10B - Fire Tests of Door Assemblies.
E. BADAAG - Americans with Disabilities Act Accessibility Guidelines.
F. CANSI/NFPA 70 - National Electrical Code.
G. CAN/CSA C22.1 - Canadian Electrical Code.
H. ISO 9001: 2000 - Quality Management Systems - Requirements.
I. Model and Local Building Codes.
1.4 SUBMITTALS
A. Submit under provisions of Section 01 30 00 - Administrative Requirements.
B. Product Data: Submit manufacturer/installer's product data, including:
1. Descriptive brochures or detail drawings of cab and hall fixtures, cab decoration options, and product features.
2. Power Information: Horsepower, starting current, running current, machine and control heat release, and electrical requirements.
C. Shop Drawings: Submit manufacturer/installer's shop drawings, including plans, elevations, sections, and details, indicating location of equipment, loads, dimensions, tolerances, materials, components, fabrication, fasteners, hardware, finish, options, accessories, and other information to render totally functional elevators.
D. Operation and Maintenance Manual: Submit manufacturer/installer's operation and maintenance manual; including operation, maintenance, adjustment, and cleaning instructions; trouble shooting guide; renewal parts catalogs; and electrical wiring diagrams.
E. Warranty: Submit documentation associated with manufacturer/installer's standard warranty.
1.5 QUALITY ASSURANCE
A. Manufacturer Qualifications: Minimum 5 year experience manufacturing similar products.
B. Installer Qualifications: Minimum 2 year experience installing similar products.
C. Regulatory Requirements:
1. Elevator design, clearances, construction, workmanship, materials, and installation, unless specified otherwise, shall be in accordance with ANSI/ASME A17.1, handicap accessibility, Americans with Disabilities Act, and other codes having legal jurisdiction.
2. ANSI/ASME A17.1 shall govern, except where codes having legal jurisdiction include more rigid requirements or conflict with ANSI/ASME A17.1.
3. Where product is in variance to the published ANSI/ASME A17.1 model code, provide a third party AECO certification demonstrating equivalent function, safety, and performance.
1.6 PRE-INSTALLATION MEETINGS
A. Pre-installation Meeting:
1. Convene pre-installation meeting before start of installation of elevators.
2. Require attendance of parties directly affecting work of this section, including Contractor, Architect, and elevator manufacturer/installer.
3. Review examination, installation, field quality control, adjusting, cleaning, protection, and coordination with other work.
1.7 DELIVERY, STORAGE, AND HANDLING
A. Deliver and store products in manufacturer's unopened packaging bearing the brand name and manufacturer's identification until ready for installation.
B. Handling: Handle materials to avoid damage.
1.8 PROJECT CONDITIONS
A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.
B. Temporary Electrical Power:
1. Coordinate availability of temporary, single-phase, 60 Hz, GFCI-protected electricity to be available for installation of elevator components.
C. Installation of the Elevator:
1. Coordinate availability of permanent power prior to installation start.
2. Coordinate availability of clear, rollable access to a 10 foot by 20 foot secure and dry storage area prior to delivery.
3. Coordinate availability of a clean, dry, and complete hoistway along with temporary installation platform and all required OSHA-compliant barricades prior to delivery.
1.9 SEQUENCING
A. Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.
1.10 WARRANTY
A. Residential Manufacturer/Installer Standard Warranty: Manufacturer/installer shall guarantee materials and workmanship of equipment installed under these specifications and make good, defects not due to ordinary wear or to improper use, which may develop after completion of installation or acceptance thereof by beneficial use, whichever is earlier.
1. Provide a 10-Year Warranty on mechanical components.
2. Provide a 3-Year Warranty on electrical components.
3. Provide a 1-Year Warranty on labor.
B. Commercial Manufacturer/Installer Standard Warranty: Manufacturer/installer shall guarantee materials and workmanship of equipment installed under these specifications and make good, defects not due to ordinary wear or to improper use, which may develop after completion of installation or acceptance thereof by beneficial use, whichever is earlier.
1. Provide a 3-Year Warranty on mechanical components.
2. Provide a 3-Year Warranty on electrical components.
3. Provide a 1-Year Warranty on labor.
1.11 MAINTENANCE SERVICE
A. Elevator maintenance service shall be performed by elevator manufacturer/installer.
B. Elevators shall receive regular maintenance on each unit for period below after completion of work specified herein or acceptance thereof by beneficial use, whichever is earlier.
** NOTE TO SPECIFIER ** Delete one of the two following paragraphs.
1. Maintenance Period: 12 months.
2. Maintenance Period: 3 months.
C. Trained employees shall make periodic examinations and perform work including necessary adjusting, greasing, oiling, and replacing parts to keep elevators in operation, except parts that require replacement because of accidents, vandalism, misuse, or negligence by parties other than manufacturer/installer.
D. Manufacturer/installer shall perform all Work, except emergency minor adjustment call-back service as follows:
** NOTE TO SPECIFIER ** Delete one of the two following paragraphs.
1. During regular working hours.
2. On overtime.
E. Manufacturer/installer shall provide emergency minor adjustment call-back service as follows:
** NOTE TO SPECIFIER ** Delete one of the two following paragraphs.
1. During regular working hours.
2. 24 hours, 7 days a week.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer: Nationwide Lifts, Inc. , which is located at: 10-B Holden Ave.; Queensbury, NY 12804; Toll Free Tel: 888-323-8755; Email: request info (); Web: www.elevators.com
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
B. Substitutions: Not permitted.
C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
2.2 DUMBWAITERS
** NOTE TO SPECIFIER ** Jeeves EconoLift: These dumbwaiters are simple and cost effective. They are available in 2 standard sizes, with custom sizes available. The cab is constructed of birch plywood. The cab has a roll-up gate. Landing doors are available, but the homeowner usually provides doors to match the home. Delete if not required.
A. Dumbwaiter: Jeeves EconoLift as manufactured by Nationwide Lifts, Inc.
** NOTE TO SPECIFIER ** Delete model not required.
1. Model: Econo-Lift 100 Dumbwaiter.
** NOTE TO SPECIFIER ** Delete door location not required.
a. Doors: Same side.
b. Doors: Front and back.
c. Car Size: 20 inches W x 20 inches D x 30 inches H (508 mm x 508 mm x 762 mm).
d. Capacity: 100 lb. (45 kg).
e. Stops: Up to 3 stops.
f. Travel: Up to 27 feet (8230 mm).
g. Travel Speed; 30 feet per minute (9 m/minute).
h. Power: Provide dedicated 115 V, 15 A circuit in a lockable fused disconnect.
2. Model: Econo-Lift 150 Dumbwaiter:
** NOTE TO SPECIFIER ** Delete door location not required.
a. Doors: Same side.
b. Doors: Front and back.
c. Car Size: 24 inches W x 24 inches D x 30 inches H (610 mm x 610 mm x 762 mm).
d. Capacity: 150 lb. (68 kg).
e. Stops: Up to 3 stops.
f. Travel: Up to 27 feet (8230 mm).
g. Travel Speed; 30 feet per minute (9 m/minute).
h. Power: Provide dedicated 115 V, 15 A circuit in a lockable fused disconnect.
3. Model: Econo-Lift 150 Dumbwaiter:
** NOTE TO SPECIFIER ** Delete door location not required.
a. Doors: Same side.
b. Doors: Front and back.
c. Car Size: 24 inches W x 24 inches D x 30 inches H (610 mm x 610 mm x 762 mm).
d. Capacity: 150 lb. (68 kg).
e. Stops: Up to 3 stops.
f. Travel: Up to 17 feet 10 inches (2388 mm).
g. Travel Speed; 30 feet per minute (9 m/minute).
h. Power: Provide dedicated 115 V, 15 A circuit in a lockable fused disconnect.
4. Provide car constructed of Birch plywood with roll-up gate.
5. Hoistway Door Operation: Swing.
** NOTE TO SPECIFIER ** Delete door construction not required.
a. Provide hoistway door constructed of plain steel.
b. Provide hoistway door constructed of stainless steel #4 mechanical finish.
c. Provide hoistway door constructed of wood.
d. Hoistway door constructed as indicated on drawings and provided in related Sections.
** NOTE TO SPECIFIER ** Delete interlock type not required.
e. Provide single contact door lock (HC-1).
f. Provide double contact door lock (HC-2).
6. Hoistway Door Controls: Wall mounted push button station:
** NOTE TO SPECIFIER ** Delete type not required.
a. Provide illuminated station with landing buttons as required.
b. Provide non-illuminated station with landing buttons as required.
** NOTE TO SPECIFIER ** Delete machine location not required.
7. Machine room location shall be located adjacent to hoistway at the bottom floor behind the rail wall as indicated.
8. Machine location shall be located within the hoistway on the bottom floor as indicated.
9. Machine location shall be located within the hoistway overhead as indicated.
** NOTE TO SPECIFIER ** Jeeves Pro: These dumbwaiters are built for commercial applications. They are available in 2 standard sizes, with custom sizes available. The cab is constructed of powder coated steel. Stainless steel upgrade is available. The cab has a bi-parting gate. Landing doors are available in bi-parting, swing, or slide-up. Delete if not required.
B. Dumbwaiter: Jeeves Pro as manufactured by Nationwide Lifts, Inc.
** NOTE TO SPECIFIER ** Delete model not required.
1. Model: Jeeves Pro 125 Dumbwaiter:
** NOTE TO SPECIFIER ** Delete door location not required.
a. Doors: Same side.
b. Doors: Front and back.
c. Car Size: 24 inches W x 24 inches D x 24 inches H (610 mm x 610 mm x 610 mm).
d. Capacity: 125 lb. (57 kg).
e. Stops: Up to 6 stops.
f. Travel: Up to 80 feet (24384 mm).
g. Travel Speed; 30 feet per minute (9 m/minute).
h. Controls; 24 V Jamb mounted push buttons with car status lights.
i. Power: Provide dedicated 115 V, 20 A circuit in a lockable fused disconnect.
2. Model: Jeeves Pro 250 Dumbwaiter:
** NOTE TO SPECIFIER ** Delete door location not required.
a. Doors: Same side.
b. Doors: Front and back.
c. Car Size: 28 inches W x 28 inches D x 28 inches H (711mm x 711 mm x 711 mm).
d. Capacity: 250 lb. (113 kg).
e. Stops: Up to 6 stops.
f. Travel: Up to 80 feet (24384 mm).
g. Travel Speed; 30 feet per minute (9 m/minute).
h. Controls; 24 V Jamb mounted push buttons with car status lights.
i. Power: Provide dedicated 115 V, 20 A circuit in a lockable fused disconnect.
** NOTE TO SPECIFIER ** Delete car construction not required.
3. Car: Provide car constructed of powder coated steel.
4. Car: Provide car constructed of stainless steel.
5. Car Gate: Bi-parting.
** NOTE TO SPECIFIER ** Delete hoistway door type not required.
6. Hoistway Door Operation: Bi-parting.
7. Hoistway Door Operation: Swing.
8. Hoistway Door Operation: Slide-up.
9. Hoistway Door:
a. Provide emergency release.
b. Provide hoistway door constructed of powder coated plain steel.
c. Provide hoistway door constructed of stainless steel #4 mechanical finish.
d. Hoistway door constructed as indicated on drawings and provided in related Sections.
** NOTE TO SPECIFIER ** Delete interlock type not required.
e. Provide single contact door lock (HC-1).
f. Provide double contact door lock (HC-2).
10. Hoistway Door Controls: Wall mounted push button station:
a. Provide illuminated station with landing buttons as required.
b. Provide non-illuminated station with landing buttons as required.
11. Machine room location shall be located adjacent to hoistway at the bottom floor behind the rail wall as indicated.
12. Machine room location shall be located within the hoistway on the bottom floor as indicated.
** NOTE TO SPECIFIER ** Jeeves Pro RST: The Jeeves Pro RST dumbwaiters are designed to meet the specific needs of restaurants. The cab, gate, and doors are constructed of stainless steel. Removable shelves are available upon request. The mechanical components are prepared for the extensive use that restaurants demand. Delete if not required.
C. Dumbwaiter: Jeeves Pro RST as manufactured by Nationwide Lifts, Inc.
1. Capacity: 250 lbs.
** NOTE TO SPECIFIER ** Delete car size not required.
2. Car Size: 20 inches W x 30 inches D x 36 inches H standard (508 mm x 762 mm x 914 mm).
3. Car Size: Custom. Refer to drawings.
4. Travel Speed: 30 feet per minute (9 m/minute).
5. Travel: Up to 6 stops and 80 feet (24384 mm).
** NOTE TO SPECIFIER ** Delete opening location not required.
6. Openings: In-line.
7. Openings: Opposite.
** NOTE TO SPECIFIER ** Delete loading location not required.
8. Loading: Floor loading.
9. Loading: Counter loading.
10. Car: Provide car constructed of stainless steel.
11. Car Gate: Slide up.
12. Hoistway Door Operation: Bi-parting.
a. Provide emergency release.
b. Provide hoistway door constructed of stainless steel #4 mechanical finish.
** NOTE TO SPECIFIER ** Delete interlock type not required.
c. Provide single contact door lock (HC-1).
d. Provide double contact door lock (HC-2).
13. Power: Provide dedicated 115 V, 20 A circuit in a lockable fused disconnect.
14. Hoistway Door Controls: Jamb mounted push button station:
** NOTE TO SPECIFIER ** Delete controls type not required.
a. Provide illuminated station with landing buttons as required.