Copyright 2015 AIAMasterSpec Premium03/15

PRODUCT MASTERSPEC LICENSED BY ARCOM TO T&S Brass & Bronze Works, Inc.

Copyright 2015 by The American Institute of Architects (AIA)

Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA

This Product MasterSpec Section is licensed by ARCOM to T&S Brass and Bronze Works, Inc. ("Licensee").

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section.

Revisions made to the original MasterSpec text are made solely by the Licensee and are not endorsed by, or representative of the opinions of, ARCOM or The American Institute of Architects (AIA). Neither AIA nor ARCOM are liable in any way for such revisions or for the use of this Product MasterSpec Section by any end user. A qualified design professional should review and edit the document to suit project requirements.

For more information, contact T&S Brass and Bronze Works, Inc., 2 Saddleback Cove, Travelers Rest, SC 29690; Phone: 1-800-476-4103; Fax: 1-800-868-0084; Website: Email: .

For information about MasterSpec contact ARCOM at (800) 424-5080 or visit

SECTION 224300 - HEALTHCARE PLUMBING FIXTURES

TIPS:

To view non-printing Editor's Notes that provide guidance for editing, click on MasterWorks/Single-File Formatting/Toggle/Editor's Notes.

To read detailed research, technical information about products and materials, and coordination checklists, click on MasterWorks/Supporting Information.

Revise this Section by deleting and inserting text to meet Project-specific requirements.

Verify that Section titles referenced in this Section are correct for this Project's Specifications; Section titles may have changed.

PART 1 - GENERAL

1.1RELATED DOCUMENTS

Retain or delete this article in all Sections of Project Manual.

  1. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division01 Specification Sections, apply to this Section.

1.2SUMMARY

  1. Section includes the following healthcare fixtures and specialties:
  2. Healthcare water closets.
  3. Flushometer valves.
  4. Toilet seats.
  5. Patient care units.
  6. Healthcare showers.
  7. Healthcare bathing units.
  8. Perineal baths.
  9. Bedpan washers.
  10. Bedpan washing equipment.
  11. Clinic sinks.
  12. Plaster sinks.
  13. Scrub sinks.
  14. Hydrotherapy whirlpools.
  15. Outlet boxes.
  16. Morgue equipment.
  17. Supports.
  18. Related Requirements:

Retain subparagraphs below to cross-reference requirements Contractor might expect to find in this Section but are specified in other Sections.

  1. Section224100 "Residential Plumbing Fixtures" for residential fixtures for use in healthcare facilities, but not requiring special healthcare fixture attributes.
  2. Section224213.13 "Commercial Water Closets" for conventional water closets, flushometer valves, carriers, and seats for use healthcare facilities, but not requiring special healthcare fixture attributes.
  3. Section224213.16 "Commercial Urinals" for urinals for use in healthcare facilities.
  4. Section224216.13 "Commercial Lavatories" for lavatories for use in healthcare facilities, but not requiring special healthcare fixture attributes.
  5. Section224216.16 "Commercial Sinks" for sinks for use in healthcare facilities, but not requiring special healthcare fixture attributes.
  6. Section224223 "Commercial Showers" for showers for use in healthcare facilities, but not requiring special healthcare fixture attributes.
  7. Section224500 "Emergency Plumbing Fixtures" for emergency showers and eye-wash units.

1.3ACTION SUBMITTALS

  1. Product Data: For each type of product.
  2. Include construction details, material descriptions, dimensions of individual components and profiles, and finishes for fixtures.
  3. Include rated capacities, operating characteristics, electrical characteristics, and furnished specialties and accessories.
  4. Sustainable Design Submittals:

"Product Data" Subparagraph below applies to LEED (including v4), IgCC, ASHRAE189.1, and Green Globes for fixtures and equipment that consume water.

  1. Product Data: For water consumption.

Retain "Shop Drawings" Paragraph below if fixtures or equipment includes wiring.

  1. Shop Drawings: Include diagrams for power, signal, and control wiring.

1.4CLOSEOUT SUBMITTALS

  1. Operation and Maintenance Data: For plumbing fixtures and faucets to include in operation and maintenance manuals.
  2. In addition to items specified in Section017823 "Operation and Maintenance Data," include the following:
  3. Servicing and adjustments of [flushometer valves] [electronic sensors] [healthcare bathing units] [bedpan washer/sanitizers] [hydrotherapy whirlpools] [and] [morgue equipment].

1.5MAINTENANCE MATERIAL SUBMITTALS

  1. Furnish extra materials that match products installed and that are packaged with protective covering for storage and identified with labels describing contents.
  2. Faucet Washers and O-Rings: Equal to [10] <Insert number> percent of amount of each type and size installed.
  3. Faucet Cartridges and O-Rings: Equal to [5] <Insert number> percent of amount of each type and size installed.
  4. Flushometer-Valve Repair Kits: Equal to [10] <Insert number> percent of amount of each type installed, but no fewer than [one] [six] <Insert number> of each type.
  5. Toilet Seats: Equal to [5] <Insert number> percent of amount of each type installed.

PART 2 - PRODUCTS

See Editing Instruction No.1 in the Evaluations for cautions about named manufacturers and products. For an explanation of options and Contractor's product selection procedures, see Section016000 "Product Requirements."

2.1HEALTHCARE WATER CLOSETS

Copy "Healthcare Water Closets" Paragraph below and re-edit for each type of wall-mounted healthcare water closet required.

Insert letter and number combination to complete drawing designation. Use these designations on Drawings to identify each healthcare water closet.

  1. Healthcare Water Closets <Insert drawing designation>: Wall mounted, [top] [back] spud[,accessible].
  2. Manufacturers: Subject to compliance with requirements, provide products by one of the following:
  3. American Standard America.
  4. Crane Plumbing, L.L.C.
  5. Kohler Co.
  6. Zurn Industries, LLC.
  7. Insert manufacturer's name>.
  8. Bowl:
  9. Standards: ASMEA112.19.2/CSAB45.1 and ASMEA112.19.5.
  10. Material: Vitreous china.
  11. Type: Siphon jet.
  12. Style: Flushometer valve.
  13. Height: Standard.
  14. Rim Contour: Elongated with bedpan lugs or slots.
  15. Water Consumption: [1.28 gal. (4.8L)] [1.6 gal. (6L)] per flush.
  16. Spud Size: NPS1-1/2 (DN40).

Coordinate "Flushometer Valve" Subparagraph below with "Flushometer Valves" Article. To require conventional flushometer valves on healthcare water closets, cross-reference Section224213.13 "Commercial Water Closets."

  1. Flushometer Valve: <Insert flushometer-valve designation>.

Coordinate "Toilet Seat" Subparagraph with "Toilet Seats" Article.

  1. Toilet Seat: <Insert toilet-seat designation>.

Coordinate "Water Closet Support" Subparagraph below with "Supports" Article.

  1. Water Closet Support: [Water closet carrier] <Insert carrier>.
  2. Water-Closet Mounting Height: [Standard] [Child] [Handicapped/elderly according to ICCA117.1].

Copy "Healthcare Water Closets" Paragraph below and re-edit for each type of floor-mounted, floor-outlet, healthcare water closet required.

Insert letter and number combination to complete drawing designation. Use these designations on Drawings to identify each healthcare water closet.

  1. Healthcare Water Closets <Insert drawing designation>: Floor mounted, floor outlet, [top] [back] spud[,accessible].
  2. Manufacturers: Subject to compliance with requirements, provide products by one of the following:
  3. American Standard America.
  4. Crane Plumbing, L.L.C.
  5. Kohler Co.
  6. Willoughby Industries.
  7. Zurn Industries, LLC.
  8. Insert manufacturer's name>.
  9. Bowl:
  10. Standards: ASMEA112.19.2/CSAB45.1 and ASMEA112.19.5.
  11. Material: Vitreous china.
  12. Type: Siphon jet.
  13. Style: Flushometer valve.
  14. Height: [Standard] [Handicapped/elderly].
  15. Rim Contour: Elongated with bedpan lugs or slots.
  16. Water Consumption: [1.28 gal. (4.8L)] [1.6 gal. (6L)] per flush.
  17. Spud Size: NPS1-1/2 (DN40).

Coordinate "Flushometer Valve" Subparagraph below with "Flushometer Valves" Article. To require conventional flushometer valves on healthcare water closets, cross-reference Section224213.13 "Commercial Water Closets."

  1. Flushometer Valve: <Insert flushometer-valve designation>.

Coordinate "Toilet Seat" Subparagraph with "Toilet Seats" Article.

  1. Toilet Seat: <Insert toilet-seat designation>.

Copy "Healthcare Water Closets" Paragraph below and re-edit for each type of floor-mounted, back-outlet healthcare water closet required.

Insert letter and number combination to complete drawing designation. Use these designations on Drawings to identify each healthcare water closet.

  1. Healthcare Water Closets <Insert drawing designation>: Floor mounted, back outlet, [top] [back] spud[,accessible].
  2. Manufacturers: Subject to compliance with requirements, provide products by one of the following:
  3. American Standard America.
  4. Crane Plumbing, L.L.C.
  5. Kohler Co.
  6. Willoughby Industries.
  7. Zurn Industries, LLC.
  8. Insert manufacturer's name>.
  9. Bowl:
  10. Standard: Standards: ASMEA112.19.2/CSAB45.1 and ASMEA112.19.5.
  11. Material: Vitreous china.
  12. Type: Siphon jet.
  13. Style: Flushometer valve.
  14. Height: [Standard] [Handicapped/elderly].
  15. Rim Contour: Elongated with bedpan lugs or slots.
  16. Water Consumption: [1.28 gal. (4.8L)] [1.6 gal. (6L)] per flush.
  17. Spud Size: NPS1-1/2 (DN40).

Coordinate "Flushometer Valve" Subparagraph below with "Flushometer Valves" Article.

  1. Flushometer Valve: <Insert flushometer-valve designation>.

Coordinate "Toilet Seat" Subparagraph with "Toilet Seats" Article.

  1. Toilet Seat: <Insert toilet-seat designation>.

2.2FLUSHOMETER VALVES

Caution: Consumption of flushometer valves for healthcare water closets and clinic sinks must match the fixture consumption. Copy "Lever-Handle, Diaphragm Flushometer Valves" Paragraph below and re-edit for each type of lever-handle, diaphragm flushometer valve with bedpan washer required. A separate bedpan washer is unnecessary where this flushometer valve is specified.

Insert letter and number combination number to complete designation. Use these designations on Drawings to identify each flushometer valve.

  1. Lever-Handle, Diaphragm Flushometer Valves <Insert designation>.
  2. Manufacturers: Subject to compliance with requirements, provide products by one of the following:
  3. Delany Products.
  4. Sloan Valve Company.
  5. Zurn Industries, LLC.
  6. Insert manufacturer's name>.
  7. Standard: ASSE1037.
  8. Minimum Pressure Rating: 125 psig (860 kPa).
  9. Features: Integral check stop, backflow-prevention device, and outlet-tube-mounted bedpan washer.
  10. Material: Brass body with corrosion-resistant components.
  11. Exposed Flushometer-Valve Finish: Chrome plated.
  12. Style: Exposed.
  13. Consumption: [1.28 gal. (4.8L)] [1.6 gal. (6L)] [3.5 gal. (13.2 L)] <Insert value> per flush.
  14. Minimum Inlet: NPS1 (DN25).
  15. Minimum Outlet: NPS1-1/4 (DN32), extended length.

2.3TOILET SEATS

Copy "Toilet Seats" Paragraph below and re-edit for each type of toilet seat required.

Insert letter and number combination to complete designation. Use these designations on Drawings to identify each toilet seat.

  1. Toilet Seats <Insert designation>.
  2. Manufacturers: Subject to compliance with requirements, provide products by one of the following:
  3. Centoco Manufacturing Corporation.
  4. Church Seats; Bemis Manufacturing Company.
  5. Kohler Co.
  6. Olsonite Seat Co.
  7. Sperzel of Lexington.
  8. Zurn Industries, LLC.
  9. Insert manufacturer's name>.
  10. Standard: IAPMOZ124.5.
  11. Material: Plastic with antimicrobial agent.
  12. Type: [Commercial (standard)] [Commercial (heavy duty)].
  13. Shape: Elongated rim, open front.
  14. Hinge: Check.
  15. Hinge Material: Noncorroding metal.
  16. Color: White.

2.4PATIENT CARE UNITS

Copy "Patient Care Units" Paragraph below and re-edit for each type of patient care unit required.

Insert letter and number combination to complete drawing designation. Use these designations on Drawings to identify each patient care unit.

  1. Patient Care Units <Insert drawing designation>: Factory-fabricated, combination, swing-away water closet and lavatory healthcare plumbing fixture.
  2. Manufacturers: Subject to compliance with requirements, provide products by one of the following:
  3. Bradley Corporation.
  4. Metcraft Industries, Inc.
  5. Whitehall Manufacturing.
  6. Willoughby Industries.
  7. Insert manufacturer's name>.
  8. Cabinet: Fixed installation with storage space and toilet paper holder.
  9. Material: [Stainless steel] [Stainless steel, plastic laminate, or fiberglass] with [laminated-wood or -plastic] [solid-plastic] [stainless-steel] top surface.
  10. Color: [Not applicable] <Insert color>.
  11. Mounting: Wall bracket.
  12. Water Closet: Swivel, floor mounted, [back] [floor] outlet.
  13. Material: Stainless steel.
  14. Orientation: [Left] [Right] hand.
  15. Seal: For outlet.
  16. Flushometer: Concealed flushometer valve with push-button trip mechanism, check stop, and vacuum breaker on tailpiece.
  17. Toilet Seat: White, solid plastic.
  18. Support: Floor plate.
  19. Lavatory: Counter mounted.
  20. Material: [Stainless steel] [Cultured marble] [Solid-surface material] <Insert material>.
  21. Color: [Not applicable] <Insert color>.
  22. Faucet: [Gooseneck type with wrist-blade handles] [Swing-spout type with single lever] <Insert type> complying with ASMEA112.18.1/CSAB125.1,NSF/ANSI61, and NSF/ANSI 372.

1)Basis-of-Design Product: Subject to compliance with requirements, provide T & S Brass and Bronze Works, Inc.;[B-0892 Series] [B-2866 Series] [B-2711 series] or a comparable product.

  1. Waste Fittings: Grid drain, with NPS1-1/4 (DN32) tailpiece and [NPS1-1/4 (DN32)] [NPS1-1/2 by NPS1-1/4 (DN40 by DN32)] chrome-plated, cast-brass P-trap; tubular-brass waste to wall; and wall flange complying with ASMEA112.18.2/CSAB125.2.

Copy "Patient Care Units" Paragraph below and re-edit for each type of factory-fabricated, combination, fixed-position patient care unit required.

Insert letter and number combination to complete drawing designation. Use these designations on Drawings to identify each patient care unit.

  1. Patient Care Units <Insert drawing designation>: Factory-fabricated, combination, fixed-position water closet and lavatory healthcare fixture.
  2. Manufacturers: Subject to compliance with requirements, provide products by one of the following:
  3. Bradley Corporation.
  4. Metcraft Industries, Inc.
  5. Whitehall Manufacturing.
  6. Willoughby Industries.
  7. Insert manufacturer's name>.
  8. Cabinet: Fixed installation; swing-away cabinet or retractable, water-closet cover design with storage space and toilet paper holder.
  9. Material: [Stainless steel] [Stainless steel, plastic laminate, or fiberglass] with [laminated-wood or -plastic] [solid-plastic] [stainless-steel] top surface.
  10. Color: [Not applicable] <Insert color>.
  11. Support: Wall bracket.
  12. Water Closet: Floor mounted, floor outlet.
  13. Material: Stainless steel or vitreous china.
  14. Orientation: [Left] [Right] hand.
  15. Seal: For outlet.
  16. Flushometer: Concealed flushometer valve with push-button trip mechanism, check stop, and vacuum breaker on tailpiece.
  17. Toilet Seat: White, solid plastic.
  18. Lavatory: Counter mounted.
  19. Material: [Stainless steel] [Cultured marble] [Solid-surface material] <Insert material>.
  20. Color: [Not applicable] <Insert color>.
  21. Faucet: [Gooseneck type with wrist-blade handles] [Swing-spout type with single lever] <Insert type> complying with ASMEA112.18.1/CSAB125.1, NSF/ANSI61, and NSF/ANSI 372.

1)Basis-of-Design Product: Subject to compliance with requirements, provide T & S Brass and Bronze Works, Inc.;[B-0892 Series] [B-2866 Series] [B-2711 series] or a comparable product.

  1. Waste Fittings: Grid drain, with NPS1-1/4 (DN32) tailpiece and [NPS1-1/4 (DN32)] [NPS1-1/2 by NPS1-1/4 (DN40 by DN32)] chrome-plated, cast-brass P-trap; tubular-brass waste to wall; and wall flange complying with ASMEA112.18.2/CSAB125.2.

2.5HEALTHCARE SHOWERS

Copy "Healthcare Showers" Paragraph below and re-edit for each type of healthcare shower required.

Insert letter and number combination to complete drawing designation. Use these designations on Drawings to identify each healthcare shower.

  1. Healthcare Showers <Insert drawing designation>: Accessible, [glass-fiber-reinforced plastic] [acrylic].
  2. Manufacturers: Subject to compliance with requirements, provide products by one of the following:
  3. Aqua Bath Company, Inc.
  4. Aqua Glass Corporation.
  5. Clarion Bathware.
  6. Crane Plumbing, L.L.C.
  7. Florestone Products Co., Inc.
  8. Willoughby Industries.
  9. Insert manufacturer's name>.
  10. Standard: ANSIZ124.1.2 and complying with ICCA117.1 for roll-in shower compartments.
  11. Nominal Size: [60 by 36 inches (1524 by 915 mm)] <Insert dimensions>.

Retain one of two "Surround" subparagraphs below. Retain first paragraph for fiber-glass-reinforced plastic surround; retain second paragraph for acrylic surround.

  1. Surround: One piece[or sealed, multiple piece].
  2. Surround: One piece.
  3. Bathing Surface: Slip resistant according to ASTMF462.
  4. Color: [White] <Insert color>.
  5. Drain Location: [Left side] [Center] [Right side].
  6. Accessibility Options: Include grab bar and bench.

Coordinate "Faucet" Paragraph with "Healthcare Shower Faucets" Article.

  1. Faucet: <Insert healthcare shower-faucet designation>.
  2. Drain: Grid, NPS2 (DN50), complying with ASMEA112.18.2/CSAB125.2.

2.6HEALTHCARE SHOWER FAUCETS

  1. NSF Standard: Comply with NSF61Annex G, "Drinking Water System Components - Health Effects," for faucet materials that will be in contact with potable water.

Copy "Healthcare Shower Faucets" Paragraph below and re-edit for each type of pressure-balance mixing valve, healthcare shower faucet required.

Insert letter and number combination to complete designation. Use these designations on Drawings to identify each healthcare shower faucet.

  1. Healthcare Shower Faucets <Insert drawing designation>: Pressure-balance mixing valve.
  2. Manufacturers: Subject to compliance with requirements, provide products by one of the following:
  3. Acorn Engineering Company.
  4. American Standard America.
  5. Chicago Faucets; Geberit Company.
  6. FNW; Ferguson Enterprises, Inc.
  7. Kohler Co.
  8. Lawler Manufacturing Company, Inc.
  9. Leonard Valve Company.
  10. Matco-Norca.
  11. Moen Incorporated.
  12. Powers.
  13. Speakman Company.
  14. Zurn Industries, LLC.
  15. Insert manufacturer's name>.
  16. Faucet:
  17. Standards: ASMEA112.18.1/CSAB125.1 and ASSE1016.
  18. Body Material: Solid brass.
  19. Finish: Polished chrome plate.
  20. Maximum Flow Rate: [2.5 gpm (9.5L/min.)] <Insert value> unless otherwise indicated.
  21. Mounting: [Concealed] [Exposed].
  22. Operation: Single-handle, [push-pull] [or] [twist or rotate] control.
  23. Antiscald Device: [Integral with mixing valve] [Separate unit] [Not required].
  24. Check Stops: Check-valve type, integral with or attached to body; on hot- and cold-water-supply connections.
  25. Indicators: For hot and cold water.
  26. Shower Head:
  27. Standard: ASMEA112.18.1/CSAB125.1.
  28. Type: [Ball joint with arm and flange] [Without ball joint, but with arm and flange] [Ball joint and head integral with mounting flange] [Integral with mounting flange] [Hand held, slide bar mounted] [Hand held, hook mounted] <Insert type>.
  29. Shower Head Material: Metallic with chrome-plated finish.
  30. Spray Pattern: [Adjustable] [Fixed].
  31. Integral Volume Control: [Not required] [Required].

Retain "Shower-Arm, Flow-Control Fitting" Subparagraph below only if option retained in "Type" Subparagraph above includes arm and flange; otherwise, delete "Shower-Arm, Flow-Control Fitting" Subparagraph below.

  1. Shower-Arm, Flow-Control Fitting: [Not required] [1.5 gpm (5.7L/min.)] [2.0 gpm (7.6L/min.)].

Verify availability of feature in "Temperature Indicator" Subparagraph below if required.

  1. Temperature Indicator: [Integral with faucet] [Not required].

Copy "Healthcare Shower Faucets" Paragraph below and re-edit for each type of thermostatic mixing valve, healthcare shower faucet required.