NOTE: This detailed specification is not complete unless it is used in conjunction with all conditions of the Technical Specifications.
INTENDED USE
USED FOR MOWING APPLICATIONS WHEN CUTTING MATERIAL UP TO 1 1/2 INCHES IN DIAMETER. MOWER CONSISTS OF TWO 5 FOOT SECTIONS DESIGNED TO FOLLOW THE CONTOUR OF THE GROUND.
MAIN DRIVE SHAFT: Category V, telescoping drive shaft with all moving parts fully shielded, including U-joints with floating, cylindrical, collapsible covers. If a blade assembly is driven directly from the main gear box/power divider a slip clutch with safety guard must be installed in the main drive shaft. Shaft shall be designed for attachment to a tractor with a 540 RPM PTO.
CENTER/WING DRIVE SHAFTS: Category IV, telescoping drive shaft with all moving parts fully shielded, including U-joints with floating, cylindrical, collapsible covers. Slip clutch with safety guard installed in center and wing drive shafts. Wing drive shafts must automatically compensated for the angle of the wing in all positions from 20 degrees below horizontal to 85 degrees above horizontal.
GEAR BOX: Fully enclosed and oil lubricated. The main gear box/power divider shall have a continuous rating of 160 HP; center and wing gear box shall have a continuous rating of 110 HP, minimum.
BLADE CARRIERS: Round blade carriers (“dishpan” or “stump-jumper pans”) for each blade shaft.
BLADES: Two free swinging, heat treated, cutter blades for each blade carrier.
FRAME & HOUSING: All welded steel construction, 10 GA deck. Counterweight box (no weight) installed on the left side of the center section. Tongue with safety chains and parking jack. Cut material discharged at the rear only, for safety purposes. Cutting height adjustable from 2 to 12 inches. Cutting height and raising and lowering of the wing section will be done hydraulically. An alternate method of raising and lowering the wing section must be provided. Hydraulic power will be supplied by the tractor. The Contractor shall furnish all the necessary cylinders, long hoses, and male couplings.
SAFETY CHAINS/SHIELDS: Front and rear safety chains.
SUSPENSION, WHEELS & TIRES: Five new 15”, 6PR automotive type wheels located at the rear of the cutter and placed inside the cutting swath. Four of the wheels must support the center section and one wheel must support the wing section. Spring loaded or rubber block mounted suspension.
SKID SHOES: Left and right replaceable skid shoes.
PAINT: Manufacturer’s standard paint and color.
CONDITIONS: Equipment offered must be completely assembled, including options/accessories and shall have been thoroughly tested and ready for operation. Equipment must be equipped with all Manufacturers’ standard components and accessories. At a minimum the Manufacturer’s standard warranty for state and municipalities shall be provided. A copy of the warranty shall be provided with the bid. Manufacturer shall have a minimum of 25 units in operation within the past 2 years for this type of mower.
765-640-332 / PRICE SHEET
CONTRACTOR COBB’S TRIANGLE TRACTOR / MAKE RHINO
List all specified Equipment that can be offered for the same percentage discount bid.
SPECIFIED EQUIPMENT: SE10-4A
*DISCOUNT F.O.B. CONTRACTOR / PERCENTAGE DISCOUNT FOR
EQUIPMENT OFFERED
$250.00 / 20% (23)
** Date of Manufacturer’s current published retail price list: 02/01/03
Approximate delivery time required after receipt of Purchase Order: 90 DAYS
Percentage discount off the Manufacturer’s current published retail price list for options/accessories for the Equipment offered.
20% Discount / ** Date of Manufacturer’s current published retail price list: 02/01/03
*Discount for pickup by the ordering agency at Contractor’s place of business.
**ALL DATES MUST BE FOR THE CURRENT PUBLISHED RETAIL PRICE LIST
THIS IS A MULTIPLE AWARD CONTRACT. THE GREATEST PERCENTAGE DISCOUNT MAY NOT PROVIDE THE LOWEST PRICE FOR THE EQUIPMENT OFFERED. IT IS STRONGLY RECOMMENDED THAT THE PURCHASER OBTAIN CURRENT RETAIL PRICE SHEETS AND QUOTES FROM THE CONTRACTOR(S) TO DETERMINE THE LOWEST PRICE FOR DESIRED EQUIPMENT.
OPTION CODING: / 765-640-333 – Option ####
NOTE: The options below apply to the Equipment offered.
0005 / Special state color, DOT Yellow (DuPont # L9069A) (may be dealer painted if factory painting is not available). NOTE: the entire unit, including options/accessories, shall be painted the same color.
PRICE: 199.00
0010 / Aircraft tires with split wheels. Bid in lieu of wheels and tires specified. Tires to be 25x6.0, 16 PR, minimum. Wheels shall fit wheel hubs furnished with cutter. Used tires may be supplied.
PRICE: 300.00
765-640-332 / PRICE SHEET
CONTRACTOR CREEL TRACTOR COMPANY / MAKE BUSH HOG
List all specified Equipment that can be offered for the same percentage discount bid.
SPECIFIED EQUIPMENT: 12610L-16 (1000 RPM GEARBOXES)
*DISCOUNT F.O.B. CONTRACTOR / PERCENTAGE DISCOUNT FOR
EQUIPMENT OFFERED
$250.00 / 31% (23)
** Date of Manufacturer’s current published retail price list: 07/01/03
Approximate delivery time required after receipt of Purchase Order: 45-120 DAYS
Percentage discount off the Manufacturer’s current published retail price list for options/accessories for the Equipment offered.
30% Discount / ** Date of Manufacturer’s current published retail price list: 07/01/03
*Discount for pickup by the ordering agency at Contractor’s place of business.
**ALL DATES MUST BE FOR THE CURRENT PUBLISHED RETAIL PRICE LIST
THIS IS A MULTIPLE AWARD CONTRACT. THE GREATEST PERCENTAGE DISCOUNT MAY NOT PROVIDE THE LOWEST PRICE FOR THE EQUIPMENT OFFERED. IT IS STRONGLY RECOMMENDED THAT THE PURCHASER OBTAIN CURRENT RETAIL PRICE SHEETS AND QUOTES FROM THE CONTRACTOR(S) TO DETERMINE THE LOWEST PRICE FOR DESIRED EQUIPMENT.
OPTION CODING: / 765-640-333 – Option ####
NOTE: The options below apply to the Equipment offered.
0005 / Special state color, DOT Yellow (DuPont # L9069A) (may be dealer painted if factory painting is not available). NOTE: the entire unit, including options/accessories, shall be painted the same color.
PRICE: 325.00
0010 / Aircraft tires with split wheels. Bid in lieu of wheels and tires specified. Tires to be 25x6.0, 16 PR, minimum. Wheels shall fit wheel hubs furnished with cutter. Used tires may be supplied.
PRICE: 480.00
(REV 07 APR 2005)
CONTRACTOR RING POWER EQUIPMENT CO / MAKE LAND PRIDE
List all specified Equipment that can be offered for the same percentage discount bid.
SPECIFIED EQUIPMENT: RC5010
*DISCOUNT F.O.B. CONTRACTOR / PERCENTAGE DISCOUNT FOR
EQUIPMENT OFFERED
$0.00 / 30% (23)
** Date of Manufacturer’s current published retail price list: 04/01/05
Approximate delivery time required after receipt of Purchase Order: 90 DAYS
Percentage discount off the Manufacturer’s current published retail price list for options/accessories for the Equipment offered.
25% Discount / ** Date of Manufacturer’s current published retail price list: 04/01/05
*Discount for pickup by the ordering agency at Contractor’s place of business.
**ALL DATES MUST BE FOR THE CURRENT PUBLISHED RETAIL PRICE LIST
THIS IS A MULTIPLE AWARD CONTRACT. THE GREATEST PERCENTAGE DISCOUNT MAY NOT PROVIDE THE LOWEST PRICE FOR THE EQUIPMENT OFFERED. IT IS STRONGLY RECOMMENDED THAT THE PURCHASER OBTAIN CURRENT RETAIL PRICE SHEETS AND QUOTES FROM THE CONTRACTOR(S) TO DETERMINE THE LOWEST PRICE FOR DESIRED EQUIPMENT.
OPTION CODING: / 765-640-333 – Option ####
NOTE: The options below apply to the Equipment offered.
0005 / Special state color, DOT Yellow (DuPont # L9069A) (may be dealer painted if factory painting is not available). NOTE: the entire unit, including options/accessories, shall be painted the same color.
PRICE: 600.00*
SEE MANUFACTURER’S STANDARD YELLOW BEFORE REQUESTING THIS OPTION
0010 / Aircraft tires with split wheels. Bid in lieu of wheels and tires specified. Tires to be 25x6.0, 16 PR, minimum. Wheels shall fit wheel hubs furnished with cutter. Used tires may be supplied.PRICE: NC
(REV 07 APR 2005)
CONTRACTOR SUPERIOR TRACTOR CO / MAKE BUSH HOG
List all specified Equipment that can be offered for the same percentage discount bid.
SPECIFIED EQUIPMENT: 2610L-12 (540 RPM GEARBOXES)
*DISCOUNT F.O.B. CONTRACTOR / PERCENTAGE DISCOUNT FOR
EQUIPMENT OFFERED
$350.00 / 31.3% (23)
** Date of Manufacturer’s current published retail price list: 01/01/05
Approximate delivery time required after receipt of Purchase Order: 90 DAYS
Percentage discount off the Manufacturer’s current published retail price list for options/accessories for the Equipment offered.
31.3% Discount / ** Date of Manufacturer’s current published retail price list: 01/01/05
*Discount for pickup by the ordering agency at Contractor’s place of business.
**ALL DATES MUST BE FOR THE CURRENT PUBLISHED RETAIL PRICE LIST
THIS IS A MULTIPLE AWARD CONTRACT. THE GREATEST PERCENTAGE DISCOUNT MAY NOT PROVIDE THE LOWEST PRICE FOR THE EQUIPMENT OFFERED. IT IS STRONGLY RECOMMENDED THAT THE PURCHASER OBTAIN CURRENT RETAIL PRICE SHEETS AND QUOTES FROM THE CONTRACTOR(S) TO DETERMINE THE LOWEST PRICE FOR DESIRED EQUIPMENT.
OPTION CODING: / 765-640-333 – Option ####
NOTE: The options below apply to the Equipment offered.
0005 / Special state color, DOT Yellow (DuPont # L9069A) (may be dealer painted if factory painting is not available). NOTE: the entire unit, including options/accessories, shall be painted the same color.
PRICE: 235.00
0010 / Aircraft tires with split wheels. Bid in lieu of wheels and tires specified. Tires to be 25x6.0, 16 PR, minimum. Wheels shall fit wheel hubs furnished with cutter. Used tires may be supplied.
PRICE: 350.00