I
International Standards in process
CD registered
Period from 01 August to 31 August 2014
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 20 / Aircraft and space vehicles
ISO/CD TR 19473 / Space systems — Best practices for orbit elements at payload — LV separation
TC 22 / Road vehicles
ISO/CD 15118-5 / Road vehicles — Vehicle to grid communication interface — Part 5: Physical layer and data link layer conformance test
TC 23 / Tractors and machinery for agriculture and forestry
ISO/CD 8437-1 / Snowthrowers — Safety requirements and test procedures — Part 1: Terminology and common tests
TC 34 / Food products
ISO/DTR 29263 / Cereals and cereal products — Sampling studies
TC 44 / Welding and allied processes
ISO/CD 5182 / Resistance welding — Materials for electrodes and ancillary equipment
ISO/CD 10656 / Electric resistance welding — Integrated transformers for welding guns
ISO/CD 22829 / Resistance welding — Transformer-rectifier for welding guns with integrated transformers — Transformer-rectifier units operating at 1000 Hz frequency
TC 79 / Light metals and their alloys
ISO/CD 16220 / Magnesium and magnesium alloys — Magnesium alloy ingots and castings
TC 83 / Sports and other recreational facilities and equipment
ISO/CD 8936 / Awnings for leisure accommodation vehicles — Requirements and test methods
ISO/CD 19202-1 / Summer toboggan runs — Part 1: Safety requirements and test methods
ISO/CD 19202-2 / Summer toboggan runs — Part 2: Safety requirements for operation
ISO/DTR 20183 / Sports and other recreational facilities and equipment — Injury and safety definitions and thresholds — Guidelines for their inclusion in standards
TC 108 / Mechanical vibration, shock and condition monitoring
ISO/CD 21940-12 / Mechanical vibration — Rotor balancing — Part 12: Procedures and tolerances for rotors with flexible behaviour
TC 131 / Fluid power systems
ISO/CD 18237 / Hydraulic fluid dehydrators — Method for evaluating water separation performance
ISO/CD 23309 / Hydraulic fluid power systems — Assembled systems — Methods of cleaning lines by flushing
TC 147 / Water quality
ISO/CD 13843 / Water quality — Requirements for establishing performance characteristics of quantitative microbiological methods
TC 156 / Corrosion of metals and alloys
ISO/CD 19280 / Measurement of crevice corrosion temperature for cylindrical crevice geometries
TC 163 / Thermal performance and energy use in the built environment
ISO/CD 52018-1 / Energy performance of buildings — Building and building elements — Ways to Express Energy Performance and Energy Performance Requirements — Part 1: Expressions and Procedures
TC 183 / Copper, lead, zinc and nickel ores and concentrates
ISO/CD 9599 / Copper, lead and zinc sulfide concentrates — Determination of hygroscopic moisture in the analysis sample — Gravimetric method
TC 204 / Intelligent transport systems
ISO/CD 16787 / Intelligent Transport Systems — Assisted Parking System (APS) - Performance requirements and test procedures
TC 211 / Geographic information/Geomatics
ISO/DTS 19159-2 / Geographic information — Calibration and validation of remote sensing imagery sensors — Part 2: Lidar
ISO/DTS 19163 / Geographic information — Content components and encoding rules for imagery and gridded data
TC 217 / Cosmetics
ISO/DTR 18109 / Survey of natural and/or organic cosmetic ingredient and product
definitions
TC 224 / Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
ISO/CD 24516-3 / Guidelines for management of assets of water supply and wastewater systems — Part 3: Wastewater collection networks
TC 260 / Human resource management
ISO/CD 30405 / Human resource management — Guidelines on recruitment
JTC 1 / Information technology
ISO/IEC CD 29110-4-1 / Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 4-1: Profile specifications: Generic profile group
ISO/IEC CD 33050-4 / Information technology — Process assessment — Part 4: A process reference model for information security management
ISO/IEC CD 33070-4 / Information technology — Process assessment — Part 4: A process assessment model for information security management
ISO/IEC PDTS 19568 / C++ Extensions for Library Fundamentals
ISO/IEC PDTS 19570 / C++ Extensions for Parallelism
ISO/IEC CD 18521-1 / Mixed and Augmented Reality (MAR) concepts and reference model — Part 1: The reference model
ISO/IEC CD 18521-2 / Mixed and Augmented Reality (MAR) concepts and reference model — Part 2: Physical sensors
ISO/IEC CD 18521-3 / Mixed and Augmented Reality (MAR) concepts and reference model — Part 3: Real character representation
ISO/IEC 13818-1/PDAM 6 / Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems — Amendment 6: Carriage of MPEG-H 3D audio over MPEG-2 Systems
ISO/IEC 14496-4:2004/PDAM 44 / Information technology — Coding of audio-visual objects — Part 4: Conformance testing — Amendment 44: Conformance testing for Video Coding for Browsers
ISO/IEC 14496-5:2001/PDAM 38 / Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 38: Reference software for Video Coding for Browsers
ISO/IEC 14496-10:2014/PDAM 1 / Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 1: Multi-Resolution Frame Compatible Stereoscopic Video with Depth Maps, and Additional Supplemental Enhancement Information
ISO/IEC CD 23000-15 / Information technology - Multimedia application format (MPEG-A) — Part 15: Multimedia preservation application format
ISO/IEC 23001-8:2013/PDAM 2 / Information technology — MPEG systems technologies — Part 8: Coding-independent code points — Amendment 2: Sample aspect ratio and additional transfer functions, colour primaries and matrix coefficients
ISO/IEC 23002-5:2013/PDAM 2 / Information technology — MPEG video technologies — Part 5: Reconfigurable media coding conformance and reference software — Amendment 2: RMC Reference Software
ISO/IEC 19788-2:2011/PDAM 1 / Information technology — Learning, education and training — Metadata for learning resources — Part 2: Dublin Core elements — Amendment 1
ISO/IEC CD 19784-1 / Information technology — Biometric application programming interface — Part 1: BioAPI specification
ISO/IEC PDTR 30125 / Biometrics — Biometrics used with mobile devices
ISO/IEC CD 30134-3 / Information Technology — Data Centres — Key Performance Indicators — Part 3: Renewable Energy Factor (REF)
ISO/IEC CD 30105-4 / IT Enabled Services / Business Process Outsourcing Lifecycle Processes ITESBPO Standard — Part 4: Terms and concepts
DIS circulated
Period from 01 August to 31 August 2014
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
PC 248 / Sustainability criteria for bioenergy
ISO/DIS 13065 / * / Sustainability criteria for bioenergy / 2014-11-20
TC 8 / Ships and marine technology
ISO/DIS 28007-1 / * / Ships and marine technology — Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract)
— Part 1: / 2014-11-20
(Revision of ISO/PAS 28007:2012)
ISO/DIS 5488 / * / Ships and marine technology — Accommodation ladders / 2014-11-27
(Revision of ISO 5488:1979)
ISO/DIS 7061 / * / Ships and marine technology — Aluminium shore gangways for seagoing vessels / 2014-11-27
(Revision of ISO 7061:1993)
ISO/DIS 7364 / * / Ships and marine tecnhology — Deck machinery — Accommodation ladder winches / 2014-11-14
(Revision of ISO 7364:1983)
TC 22 / Road vehicles
ISO/DIS 17536-1 / * / Road vehicles — Aerosol separator performance test for internal combustion engines — Part 1: General / 2014-11-14
ISO/DIS 17449 / * / Road vehicles — Safety glazing materials — Test methods for properties of electrically heated glazing / 2014-11-26
ISO 2575:2010/DAmd 5 / * / Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 5 / 2014-10-16
ISO/DIS 18580 / * / Motorcycles — Verification of total running resistance force during mode running on a chassis dynamometer / 2014-11-13
TC 23 / Tractors and machinery for agriculture and forestry
ISO/DIS 18471 / * / Agricultural irrigation equipment — Filters — Verification of filtration grade / 2014-11-27
TC 36 / Cinematography
ISO/DIS 2969 / * / Cinematography — B-chain electro-acoustic reponse of motion-picture control rooms and indoor theatres — Specifications and measurements / 2014-11-20
(Revision of ISO 2969:1987)
TC 37 / Terminology and other language and content resources
ISO/DIS 16642 / * / Computer applications in terminology — Terminological markup framework / 2014-11-27
(Revision of ISO 16642:2003)
TC 38 / Textiles
ISO/DIS 105-G01 / * / Textiles — Tests for colour fastness — Part G01: Colour fastness to nitrogen oxides / 2015-01-22
(Revision of ISO 105-G01:1993, ISO 105-G01:1993/Cor 1:1995)
TC 39 / Machine tools
ISO/DIS 17543-1 / * / Machines tools — Test conditions for accessory spindle heads — Part 1: Horizontal spindle machines / 2014-11-26
TC 45 / Rubber and rubber products
ISO/DIS 6505 / * / Rubber, vulcanized or thermoplastic — Determination of tendency to adhere to and corrode metals / 2014-11-14
(Revision of ISO 6505:2005)
ISO/DIS 11344 / * / Rubber, raw synthetic — Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography / 2014-11-05
(Revision of ISO 11344:2004, ISO 11344:2004/Cor 1:2008)
ISO/DIS 18517 / * / Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide / 2014-11-05
(Revision of ISO 18517:2005)
ISO/DIS 4633 / * / Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials / 2014-11-20
(Revision of ISO 4633:2002)
TC 61 / Plastics
ISO/DIS 6721-10 / * / Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer / 2014-11-17
(Revision of ISO 6721-10:1999)
ISO/DIS 17855-2 / * / Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties / 2015-01-29
(Revision of ISO 1872-2:2007)
TC 71 / Concrete, reinforced concrete and pre-stressed concrete
ISO/DIS 16711 / * / Seismic assessment and retrofit of concrete structures / 2014-10-20
TC 76 / Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO 13926-2:2011/DAmd 1 / * / Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use — Amendment 1 / 2014-11-20
TC 83 / Sports and other recreational facilities and equipment
ISO/DIS 20957-9 / * / Stationary training equipment — Part 9: Elliptical trainers, additional specific safety requirements and test methods / 2015-01-22
(Revision of ISO 20957-9:2005)
TC 94 / Personal safety -- Protective clothing and equipment
ISO 17491-4:2008/DAmd 1 / * / Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) — Amendment 1 / 2015-01-22
TC 108 / Mechanical vibration, shock and condition monitoring
ISO 10816-6:1995/DAmd 1 / * / Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 6: Reciprocating machines with power ratings above 100 kW — Amendment 1 / 2014-11-20
TC 122 / Packaging
ISO/DIS 780 / * / Packaging — Distribution packaging — Graphical symbols for handling and storage of packages / 2015-01-15
(Revision of ISO 780:1997)
ISO/DIS 15394 / * / Packaging — Bar code and two-dimensional symbols for shipping, transport and receiving labels / 2014-11-14
(Revision of ISO 15394:2009)
ISO/DIS 28219 / * / Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols / 2014-11-14
(Revision of ISO 28219:2009)
TC 130 / Graphic technology
ISO/DIS 2834-2 / * / Graphic technology — Laboratory preparation test prints — Part 2: Liquid printing inks / 2014-11-13
(Revision of ISO 2834-2:2007)
ISO/DIS 17972-4 / * / Graphic technology — Colour data exchange format (CxF/X) — Part 4: Spot colour characterisation data (CxF/X-4) / 2014-11-12
TC 131 / Fluid power systems
ISO/DIS 1219-3 / * / Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams / 2014-11-20
ISO/DIS 6020-3 / * / Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 3: Compact series with bores from 250 mm to 500 mm / 2014-11-14
(Revision of ISO 6020-3:1994)
ISO/DIS 5781 / * / Hydraulic fluid power — Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves — Mounting surfaces / 2014-11-27
(Revision of ISO 5781:2000)
ISO/DIS 7368 / * / Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities / 2014-11-25
(Revision of ISO 7368:1989)
TC 138 / Plastics pipes, fittings and valves for the transport of fluids
ISO/DIS 18488 / * / Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method / 2014-11-14
ISO/DIS 18489 / * / Polyethylene (PE) materials — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method / 2014-11-14
TC 146 / Air quality
ISO/DIS 19694-1 / * / Stationary source emissions — Determination of greenhouse gas (GHG) emissions in energy-intensive industries — Part 1: General aspects / 2015-01-22
ISO/DIS 19694-2 / * / Stationary source emissions — Greenhouse Gas (GHG) emissions in energy-intensive industries — Part 2: Iron and steel industry / 2015-01-22
ISO/DIS 19694-3 / * / Stationary source emissions — Determination of greenhouse gas (GHG) emissions in energy-intensive industries — Part 3: Cement industry / 2015-01-22
ISO/DIS 19694-4 / * / Stationary source emissions — Determination of greenhouse gas (GHG) emissions in energy-intensive industries — Part 4: Aluminium industry / 2015-01-22
ISO/DIS 19694-5 / * / Stationary source emissions — Determination of greenhouse gas (GHG) emissions in energy-intensive industries — Part 5: Lime industry / 2015-01-22