LOOP® Type 1

The LOOP® system is an open metal ceiling with an open area of more than 50%. Thanks to the flare [5 mm] of the perforation pattern [RV-50-40] the ceiling has a three-dimensional visual effect and hides the insight into the plenum. Bypassing the perforation, the s-shaped sides of the LOOP® interlock both the long- and front-side joint. With a magnetic suspension, the elements are installed with a circumferential 1 mm joint, thus compensating tolerances in x and y direction. The magnetic suspension system effectuates a self-alignment of the elements [puzzle effect].

The substructure consists of a formperforated L profile [U1040] as a lateral grid which is suspended from the ceiling with nonius adjustable upper and lower parts or with threaded rods using official approved dowel plugs. The grid profiles are to be connected together at the ends by means of longitudinal connectors [U 1041] [screw fasteners]. The spacing of the grid profile is according to the requirements of DIN EN 13964 as well as the loads of the system and to be determined and checked by the contractor. The profiles are attached to the walls with U 1042 wall brackets. On profiles angles, C-bandraster as secondary profiles are bolted on by means of C channel hanger bracket with M6 bolts. The longitudinal connections of the C-profiles are made by C profile connectors. The attachment to the walls is made with wall brackets.

The ceiling elements are provided with magnets at the back and are force-fitted to the C-profiles. Thus, they are removable without using tools. They are secured with ropes against swinging down in an uncontrolled way. The dimensions of the standard module are 966 x 1115.44 mm.

Only construction parts approved by the manufacturer may be used.

Acoustics

A perforated backing plate with an acoustic fleece can be supplemented powdercoated similar to RAL …

Integration artificial light

The LOOP® perforation is suitable for the integration of the built-in LED-based PUNTEO®-J80 luminaire which can be integrated in the LOOP® elements, i.e. a separate suspension is usually not required. All luminaires will be equipped with a flexible connection and can be dismounted with the ceiling panel. The power supplies are located in the ceiling void. The PUNTEO®-J80 can be placed freely on the LOOP® element via adapters.

Leading brand system durlum system LOOP® with PUNTEO®-J80 or equivalent. Consisting of:

Pos......
...... m2 / Delivery and installation of LOOP® ceiling elements,
Material: aluminium; t=2 mm
Surface: DUROPLAN® A050
Module length: 966 mm
Module width: 1115.44 mm
Unit price: …€/m²
Total price: …€
Pos......
...... m2 / Delivery and installation of LOOP® ceiling elements with integrated built-in PUNTEO®-J80 luminaires
Material: aluminium; t=2 mm with stiffeners, silver anodized
Surface optionally: o anodized DUROPLAN® A050 or o powdercoated sim. to RAL …
Module length: 966 mm
Module width: 1115.44 mm
Optional: integration of perf. backing plate with fleece sim. RAL….
… pcs. PUTNEO®-J80 per element
Optionally: o PUN J080-014S3-01 [warm white] or o PUN J080-014S4-01 [neutral white]
Connected load: 19 W with transformer
Light current: 700-800 lm
Fitted with: 14 W LED Array replacable
Efficiency: 83 %!
Lighting technology: narrow beam - 2 x 20 °
Material: mounting frame chromium-plated ; reflector aluminium anodized
Mounting height: min. 150 mm
Ceiling opening: Ø 73 mm
Unit price: …€/m²
Total price: …€
Pos
pcs / Set up cost per format, size and call-off
Pos......
...... m2 / Delivery and installation of a suspension system for LOOP® system
1.  Perforated L carrier [U1040] as a primary carrier black
2.  L carrier connector [U 1041] at the ends
3.  Wall brackets [U 1042]
4.  C bandraster type W=185mm, steel, black
5.  C profile hangers
6.  C Profile connectors
7.  C Profil wall brackets
8.  Nonius adjustable upper and lower parts
9. 
Unit price: …€/m²
Total price: …€