ASTM STANDARDS REFERENCED IN THE NRC REGULATORY GUIDES
Power Reactors (Division 1)
1.14 Reactor Coolant Pump Flywheel Integrity
A01 on Steel, Stainless Steel, and Related Alloys
A20 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
E08 on Fatigue and Fracture
E399 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
1.21 Measuring, Evaluating, and Reporting Radioactive Material in Liquid and Gaseous Effluents and Solid Waste
D19 on Water
D3370 Standard Practices for Sampling Water from Closed Conduits
E11 on Quality and Statistics
E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
1.35 Inservice Inspection of Ungrouted Tendons in Prestressed Concrete Containments
D02 on Petroleum Products and Lubricants
D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration
D19 on Water
D512 Standard Test Methods for Chloride Ion In Water
D3867 Standard Test Methods for Nitrite-Nitrate in Water
Withdrawn Standard
D992 Method of Test for Nitrate Ion in Water (Withdrawn 1983)
1.35.1 Determining Prestressing Forces for Inspection of Prestressed Concrete Containments
Committee C09 on Concrete and Concrete Aggregates
C512 Standard Test Method for Creep of Concrete in Compression
1.36 Nonmetallic Thermal Insulation for Austenitic Stainless Steel
Committee D19 on Water
D512 Standard Test Methods for Chloride Ion in Water
D1179 Standard Test Methods for Fluoride Ion in Water
Committee E01 on Analytical Chemistry for Metals, Ores, and Related Materials
E60 Standard Practice for Analysis of Metals, Ores, and Related Materials by Molecular Absorption Spectrometry
Committee C16 on Thermal Insulation
C692 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
Withdrawn Standards
E62 Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods) (Withdrawn 2010)
E120 Standard Test Methods for Chemical Analysis of Titanium and Titanium Alloys (Withdrawn 2003)
E146 Methods of Chemical Analysis of Zirconium and Zirconium Alloys (Silicon, Hydrogen, and Copper) (Withdrawn 1989)
1.44 Control of the Use of Sensitized Stainless Steel
A01 on Steel, Stainless Steel, and Related Alloys
A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
1.52 Design, Inspection, and Testing Criteria for Air Filtration and Adsorption Units of Post-Accident Engineered-Safety-Feature Atmosphere Cleanup Systems in Light-Water-Cooled Nuclear Power Plants
Committee D28 on Activated Carbon
D3803 Standard Test Method for Nuclear-Grade Activated Carbon
1.54 Service Level I, II, and III Protective Coatings Applied to Nuclear Power Plants
Committee D33 on Protective Coating and Lining Work for Power Generation Facilities
D3843 Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities
D4256 Test Method for Determination of the Decontaminability of Coatins Used in Light-Water Nuclear Power Plants (Withdrawn 1995)
D3911 Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions
D5144 Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants
D4538 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
D4537 Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating Work Inspection in Nuclear Facilities
D5163 Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants
D7167 Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
D5139 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
D4082 Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants
D3912 Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants
D5498 Standard Guide for Developing a Training Program for Personnel Performing Coating Work Inspection for Nuclear Facilities
D7108 Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist
D4286 Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities
D4227 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces
D4228 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces
D7491 Standard Guide for Management of Non-Conforming Coatings in Coating Service Level I Areas of Nuclear Power Plants
Committee D01 on Paint and Related Coatings, Materials, and Applications
D6677 Standard Test Method for Evaluating Adhesion by Knife
D7234 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
1.65 Materials and Inspections for Reactor Vessel Closure Studs
A01 on Steel, Stainless Steel, and Related Alloys
A540 Standard Specification for Alloy-Steel Bolting for Special Applications
1.72 Spray Pond Piping Made from Fiberglass-Reinforced Thermosetting Resin
Committee F17 on Plastic Piping Systems
D1599 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
Committee D20 on Plastics
D2992 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
1.78 Evaluating the Habitability of a Nuclear Power Plant Control Room During a Postulated Hazardous Chemical Release
Committee E06 on Performance of Buildings
E741 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
1.84 Design, Fabrication, and Materials Code Case Acceptability, ASME Section III
A01 on Steel, Stainless Steel, and Related Alloys
A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A276 Standard Specification for Stainless Steel Bars and Shapes
A352 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A479 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A500 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A501 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A564 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A572 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A743 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A710 Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
Committee F17 on Plastic Piping Systems
D1599 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
Committee B05 on Copper and Copper Alloys
B271 Standard Specification for Copper-Base Alloy Centrifugal Castings
B151 Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
B61 Standard Specification for Steam or Valve Bronze Castings
Committee B09 on Metal Powders and Metal Powder Products
B525 Specification for Sintered Austenitic Stainless Steel Structural Parts (Withdrawn 1989 and Replaced by B783)
Committee B10 on Reactive and Refractory Metals and Alloys
B363 Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
Withdrawn Standard
A708 Practice for Detection of Susceptibility to Intergranular Corrosion in Severely Sensitized Austenitic Stainless Steel (Withdrawn 1988)
1.90 Inservice Inspection of Prestressed Concrete Containment Structures with Grouted Tendons
Committee C09 on Concrete and Concrete Aggregates
C597 Standard Test Method for Pulse Velocity through Concrete
1.99 Radiation Embrittlement of Reactor Vessel Materials
A01 on Steel, Stainless Steel, and Related Alloys
A533 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
Committee E10 on Nuclear Technology and Applications
E185 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
E693 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA), E 706(ID)
1.107 Qualifications for Cement Grouting for Prestressing Tendons in Containment Structures
Committee C01 on Cement
C150 Standard Specification for Portland Cement
C191 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
C109 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
Committee C09 on Concrete and Concrete Aggregates
C260 Standard Specification for Air-Entraining Admixtures for Concrete
C494 Standard Specification for Chemical Admixtures for Concrete
Committee D19 on Water
D512 Standard Test Methods for Chloride Ion in Water
D516 Standard Test Method for Sulfate Ion in Water
D596 Standard Guide for Reporting Results of Analysis of Water
D1129 Standard Terminology Relating to Water
D1293 Standard Test Methods for pH of Water
Withdrawn Standard
D992 Method of Test for Nitrate Ion in Water (Withdrawn 1983)
1.132 Site Investigations for Foundations of Nuclear Power Plants
Committee D18 on Soil and Rock
D5092 Standard Practice for Design and Installation of Ground Water Monitoring Wells
1.137 Fuel-Oil Systems for Standby Diesel Generators
Committee D02 on Petroleum Products and Lubricants
D975 Standard Specification for Diesel Fuel Oils
D270 Methods of Sampling Petroleum and Petroleum Products (Withdrawn 1982 and Replaced by D4057 and D4177)
1.138 Laboratory Investigations of Soils and Rocks for Engineering Analysis and Design of Nuclear Power Plants
Committee C09 on Concrete and Concrete Aggragates
C127 Standard Test Method for Density, Relative Density (Specific Gravity), and
Absorption of Corse Aggregate
C128 Standard Test Method for Density, Relative Density (Specific Gravity), and
Absorption of Fine Aggregate
C294 Standard Descriptive Nonmenclature for Constitutes of Concrete Aggregate
C535 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
Committee D18 on Soil and Rock
D4753 Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
D3740 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
D4220 Standard Practices for Preserving and Transporting Soil Samples
D2488 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)
D4452 Standard Practice for X-Ray Radiography of Soil Samples
D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
D5878 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes
D4015 Standard Test Methods for Modulus and Damping of Soils by Resonant-Column Method
D421 Standard Practice for Dry Preparation of Soil Samples for Particle-Size
Analysis and Determination of Soil Constants
D422 Standard Test Method for Particle-Size Analysis of Soils
D425 Standard Test Method for Centrifuge Moisture Equivalent of Soils
D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil
Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3)
D854 Standard Test Methods for Specific Gravity of Soil Solids by Water
Pycnometer
D1140 Standard Test Methods for Amount of Material in Soils Finer than the No. 200 (75-um) Sieve
D1557 Test Method for Laboratory Compaction Characteristics of Soil Using
Modified Effort (56,000 ft-lbf/ft3 (2,700kN-m/m3))
D1558 Standard Test Method for Moisture Content Penetration Resistance
Relationships of Fine-Grained Soils
D2166 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
D2216 Standard Test Method for Laboratory Determination of Water (Moisture)
Content of Soil and Rock by Mass
D2434 Standard Test Method for Permeability of Granular Soils (Constant
Head)
D2435 Standard Test Method for One-Dimensional Consolidation Properties of
Soils
D2664 Standard Test Method for Triaxial Compressive Strength of Undrained Rock
Core Specimens without Pore Pressure Measurements (Withdrawn 2004 and Replaced by D7012)
D2845 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock
D2850 Standard Test Method for Unconsolidated-Undrained Triaxial
Compression Test on Cohesive Soils
D2936 Standard Test Method for Direct Tensile Strength of Intact Rock Core
Specimens
D2938 Standard Test Method for Unconfined Compressive Strength of Intact Rock
Core Specimens (Withdrawn and Replaced by D7012)
D2974 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
D3080 Standard Test Method for Direct Shear Test of Soils under Consolidated
Drained Conditions
D3148 Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression (Withdrawn and Replaced by D7012)
D3967 Standard Test Method for Splitting Tensile Strength of Intact Rock Core
Specimens
D3999 Standard Test Methods for the Determination of the Modulus and
Damping Properties of Soils Using the Cyclic Triaxial Apparatus
D4186 Standard Test Method for One-Dimensional Consolidation Properties
of Soils Using Controlled-Strain Loading
D4221 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils
Using a Vibratory Table
D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils
and Calculation of Relative Density
D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of
Soils
D4404 Standard Test Methods of Pore Volume and Pore Volume Distribution of
Soil and Rock by Mercury Intrusion Porosimetry
D4405 Standard Test Methods for Creep of Cylindrical Soft Rock Core Specimens in
Uniaxial Compressions (Withdrawn 2005 and Replaced by D7070)
D4452 Standard Methods for X-Ray Radiography of Soil Samples
D4525 Standard Test Method for Permeability of Rocks by Flowing Air
D4542 Standard Test Method for Pore Water Extraction and Determination of the
Soluble Salt Content of Soils by Refractometer
D4612 Standard Practice for Calculating Thermal Diffusivity of Rocks
D4643 Standard Test Method for Determination of Water (Moisture) Content of Soil by the Microwave Oven Method
D4644 Standard Test Method for Slake Durability of Shales and Similar Weak
Rocks
D4647 Standard Test Method for Identification and Classification of Dispersive
Clay Soils by the Pinhole Test
D4767 Standard Test Method for Consolidated Undrained Triaxial Compression Test
for Cohesive Soils
D4943 Standard Test Method for Shrinkage Factors of Soils by the Wax Method
D4959 Standard Test Method for Determination of Water (Moisture) Content of Soil
by Direct Heating
D5080 Standard Test Method for Rapid Determination of Percent Compaction
D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of
Saturated Porous Materials Using a Flexible Wall Permeameter
D5311 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
D5407 Standard Test Method for Elastic Moduli of Undrained Intact Rock Core
Specimens in Triaxial Compression without Pore Pressure Measurement (Withdrawn 2005 and Replaced by D7012)
D5550 Standard Test Method for Specific Gravity of Soil Solids by Gas
Pycnometer
D5607 Standard Test Method for Performing Laboratory Direct Shear Strength Tests
of Rock Specimens Under Constant Normal Force
Withdrawn Standards
D2217 Standard Practice for Wet Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants (Withdrawn 2007)
D427 Test Method for Shrinkage Factors of Soils by the Mercury Method (Withdrawn 2008)
1.140 Design, Inspection, and Testing Criteria for Air Filtration and Adsorption Units of Normal Atmosphere Cleanup Systems in Light-Water-Cooled Nuclear Power Plants
Committee D28 on Activated Carbon
D3803 Standard Test Method for Nuclear-Grade Activated Carbon
1.142 Safety-Related Concrete Structures for Nuclear Power Plants (Other than Reactor Vessels and Containments)
General Reference to ASTM Concrete Standards
1.143 Design Guidance for Radioactive Waste Management Systems, Structures, and Components Installed in Light-Water-Cooled Nuclear Power Plants
Committee A01 on Steel, Stainless Steel, and Related Alloys
A36 Standard Specification for Carbon Structural Steel
A500 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A795 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
Committee A04 on Iron Castings
A571 Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
Committee B05 on Copper and Copper Alloys