Mark Andrews
OBJECTIVE: Goal-Oriented, Hardworking individual looking for a position as a Facility Manager/ Maintenance Mechanic, where I can use my skills and experience to assist my employer to reach there goals; and where hard work is rewarded, able to function effectively in a fast paced environment.
MAINTENANCE MECHANIC FEB2014-PRESENT
ZENITH PRODUCT CORPORATION NEW CASTLE DEL
-order parts and complied with PM Program with the use of MP2 Program
-Troubleshoot issues with all types of production equipment
-Had the lowest downtime with improvements made to production lines
MAINTENANCE MECHANIC MAY2013-JAN2014
READY PAC PRODUCE FLORENCE NJ
-Followed PM Program and ordering of parts as needed for projects
-Troubleshooting of electrical, pneumatics, hydraulics, motors and gearboxes
-troubleshooting of Allen Bradley freq drives and I/O cards for plc
-Ensured less down time to fix production equipment correctly
MAINTENANCE MECHANIC FEB2011-MAY2013
RASTELLI MEATS LOGAN TWP NJ
-Troubleshooting production equipment
-ensured pm program and work orders
-maintained production machines where running in peak performance and also after constant change over
-troubleshoot all phases of electronics and electrical, pneumatics, ,hydraulics.
MAINTENANCE MECHANIC/LEAD MECHANIC JAN2011-MAY2012
LABREA BAKERY LOGAN TWP NJ
-Made Lead Mechanic within 3 months of hire
-Handle PM Notifications and inventory program (SAP)
-Supervised 5 mechanics
-Experienced with all different types of conveyors, elevators, and robots.
-Experienced with all kinds of sensors, gear motors, servomotors, valves, proximity switches, air, electric (Allen Bradley Flex Drives),I/O Cards, Panel views ,Hydraulics.
-Equipment San Cassiano mixers and proofers ,Rheon dough forming, iteca systems, Conveyors(Capway, Hytrol, CHL,STI), FMC Coolers and Spiral Freezers and all types of Packaging Equipment
-Maintain the Highest Production Total With Less Down Time.(5 Bread and packaging Lines)
MAINTENANCE MECHANIC FEB2010-JAN2011
DIETZ &WATSON FINE MEATS PHILADELPHIA PA
-Served as lead mechanic for maintenance and repair team
-Maintained production line machineries at peak efficiency to meet production goals
-Installed and operated machinery
-Ordered parts and maintained inventory
-Experience with high speed conveyors, motor controls, photo eyes, proximity sensors, gear boxes, servo motors, hydraulics, pneumatics, WEBER 904 Slicing machine, RAPID PAK ,MULTIVAC Packaging system, ACCUSORT AND INTERLEAVER Conveyor systems
-Maintained 5 slicing lines running to high production levels
PRODUCTION MECHANIC SEPT2008-OCT2010
INDUCTOTHERM CORPORATION RANCOCAS NJ
-Assemble induction melting systems and power supplies for the metal industry for the largest manufacturer of induction equipment.
-Installed industrial SCR'S, ACI'S, capacitors, reactors and copper bus bar.
-Drill and Tap appropriate holes for mounting, bend copper bus bar up to 12 inches wide, water hoses and tubing for cooling purposes.
-Check systems for leakage buy inducing air and helium test.
-Build systems according to engineering blueprints.
MAINTENANCE MECHANIC/FACILITY MANAGER JUNE2007-AUGUST2008
POLYMER GROUP INC LANDISVILLE NJ
-Fill out inspection checklist on production line for visual and noise defects
-Responsible for installation, corrective maintenance, and preventative maintenance of all equipment and systems
-set-up, troubleshoot and repair mechanical or electrical problems as needed on production line, includes sheet metal work, work on hydraulics, and pneumatic systems, conveyor systems, check and clean motors, belts, bearings, chains, pumps, filters, fans, etc; also install pipes and valves
-Maintain building & grounds
-Made sure facility was running 100% safely and correctively
-Prepared and filled all work orders in a timely manner
-Assisted maintenance mechanics in all PM programs
-Certified forklift operator
-30-Hours OSHA Training
-Some welding experience, work with conveyor systems, change parts such as pulleys ,gears, belts also work with hot oil systems, also assisted mechanics in 10,000lb roll changes
OWNER / PRESIDENT APRIL1996-MAY2007
SHORE TO PLEASE HOME IMPROVEMENTS WOODBURY HTS NJ
-Constructed over 30 homes and 12 additions
-Answered phone, placed orders, bookkeeping, read blueprints, and priced work accordingly
-Installed Roofing, siding, doors, windows, flooring in a professional manner
-Also installed roof trusses, commercial rubber (carlisle roofing) and torch down granular or rubber roofing
EDUCATION
DIPLOMA SEPTEMBER1984-JUNE87
GATEWAY REGIONAL HIGH SCHOOL WOODBURY HEIGHTS NJ
-Graduated as a business major
-Maintain 2.7 GPA
-Received a money bond for woodshop
-Earned a varsity wrestling letter at a freshman standing
ASSOCIATES DEGREE/ELECTRONIC TECHNICIAN
DEVRY TECHNICAL INSTITUTE OF ELECTRONICS
-1800 Hours hands-on-lab, Deans list (3.0GPA) , -Extensive Intel 3086 processors, telecommunications, and op-amplifiers
SKILLS
Carpentry, Custom woodworking, Auto mechanics, electronics, forklift operator Electrical, plumbing, painting, HVAC, Bookkeeping, Shipping and receiving, Machine operator