GD0G 23 / SVQ 3 Process Engineering Maintenance (Electrical) at SCQF Level 7
To attain the qualification candidates must complete 12Units in total. This comprises:
8mandatory Units
4optional Units

Please note the table below shows the SSC identification codes listed alongside the corresponding SQA Unit codes. It is important that the SQA Unit codes are used in all your recording documentation and when your results are communicated to SQA.

Mandatory Units: Candidates must complete all 8 Units from this group
SQA code / SSCcode / Title / SCQF level / SCQF credits
FP3J 04 / COGPEM26 / Hand Over Process Engineering Plant and Equipment / 6 / 5
FP3K 04 / COGPEM27 / Reinstate the Work Area after Completing the Maintenance of Process Engineering Plant and Equipment / 6 / 5
FP3L 04 / COGPEM28 / Minimise Risks to Life, Property and the Environment / 6 / 7
FP3M 04 / COGPEM29 / Work Safely, Minimise Risk and Comply with Emergency Procedures / 6 / 6
FP3P 04 / COGPEM30 / Contribute to Effective Working Relationships / 6 / 2
FP4H 04 / COGPEM14 / Carry Out Planned Maintenance Procedures on Electrical Plant and Equipment / 7 / 8
FP4J 04 / COGPEM50 / Deal with Variations and Defects in Electrical Plant and Equipment / 7 / 6
FP4K 04 / COGPEM51 / Diagnose and Determine the Causes of Faults in Electrical Plant and Equipment / 7 / 8
Optional Units Group A: Candidates must complete 2 Unit from this group
SQA code / SSCcode / Title / SCQF level / SCQF credits
FP3R 04 / COGPEM31 / Prepare Work Areas for Engineering Activities / 6 / 7
FP4L 04 / COGPEM52 / Prepare Equipment in Support of Electrical Engineering Activities / 6 / 5
FP4M 04 / COGPEM53 / Prepare Materials for the Maintenance of Electrical Plant and Equipment / 6 / 4
FP4N 04 / COGPEM54 / Adjust Electrical Plant and Equipment to Meet Operational Requirements / 7 / 6
FP4P 04 / COGPEM55 / Remove Components from Electrical Plant and Equipment / 7 / 6
FP4T 04 / COGPEM56 / Replace Components in Electrical Plant and Equipment / 7 / 6
FP4W 04 / COGPEM57 / Determine the Feasibility of Repair of Components from Electrical Plant and Equipment / 7 / 6
Optional Units Group B: Candidates must complete 2 Units from this group
SQA code / SSCcode / Title / SCQF level / SCQF credits
FP4Y 04 / COGPEM58 / Interpret Detailed Electrical Information from Technical Sources / 7 / 4
FP55 04 / COGPEM59 / Read and Extract Information from Electrical Engineering Drawings and Specifications / 7 / 6
FP57 04 / COGPEM60 / Identify and Suggest Improvements to Working Practices and Procedures Whilst Maintaining Electrical Plant and Equipment / 7 / 6
FP59 04 / COGPEM44 / Establish that an Electrical Engineering Maintenance Process has been Completed to Specification / 7 / 6
FP5C 04 / COGPEM61 / Test the Performance and Condition of Electrical Plant and Equipment / 7 / 6
FP5E 04 / COGPEM62 / Monitor the Performance and Condition of Electrical Plant and Equipment / 7 / 7
FR47 04 / COGPEM63 / Assess the Performance and Condition of Electrical Plant and Equipment / 7 / 7
FP5R 04 / COGPEM64 / Inspect Electrical Plant and Equipment / 7 / 6

GD0G 23 SVQ 3Process Engineering Maintenance (Electrical)at SCQF level 71