Re-Code for Enhanced Bluetooth

Re-Code for Enhanced Bluetooth:

Change FA (VO) to Remove 6NH from VO & Add 6NS to VO

VO Code HU_ENTRY & CMB_MEDIA (or just HU-NBT)

Read FA(VO)àActivate FA(VO)àRead SVTàRight-Click ECU & Select Code

Now Proceed to code HU_ENTRY & CMB_MEDIA (or just HU_NBT) Modules … or re-code if coding was already present

IF YOU NEED TO DO THE ABOVE … FOLLOW THE INSTRUCTIONS FOR “HOW TO CHANGE FA” in my BMW Coding Beginner’s Guide. This needs to be done FIRST … meaning before you perform FDL Coding or Changing Werte Values

ACSM Module:

SeatBelt Reminder Lights OFF

3001àGurtzustandsanzeige_Beifahrer (Driver) Set to: nicht_aktiv

3001àGurtzustandsanzeige_Fahrer (Passenger) Set to: nicht_aktiv

Disable Welcome 3 Gongs:

3001 à Initialwarnung Set to: nicht_aktiv

SeatBelt Reminders/Sound OFF

3001àSBR-PreWarning_Fahrer (Driver) Set to: nicht_aktiv

3001àSBR-PreWarning_Beifahrer (Passenger) Set to: nicht_aktiv

BDC Body Module:

Change Behavior of 3rd Button on Keyfob (short, med, long press of button)

30D0 à RC_DEFAULT_IDG_3RD_BUTTON_SHORT set to: option below

30D0 à RC_DEFAULT_IDG_3RD_BUTTON_MID set to: option below

30D0 à RC_DEFAULT_IDG_3RD_BUTTON_LONG set to: option below

30D0 à RC_DEFAULT_IDG_4TH_BUTTON_SHORT set to: option below

30D0 à RC_DEFAULT_IDG_4TH_BUTTON_MID set to: option below

30D0 à RC_DEFAULT_IDG_4TH_BUTTON_LONG set to: option below

Wert_00 = No Action

Wert_02 = Open Trunk (rear Boot)

Wert_03 = Panic Alarm

Wert_04 = Follow-Me-Home (find car in dark parking lot – lights on)

Wert_05 = Open Frunk (front boot)

Wert_07 = Auxillary Cooling

Auto Start/Stop OFF by default

3023àTCM_MSA_DEFAULT_OFF set to: aktiv – werte=01

Auto Start/Stop – Remember LAST Setting

3023àTCM_MSA_MEMORY set to: aktiv – werte=01

Unlock all doors with engine off (Single-Pull Handles):

3040àVAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK set to: aktiv

Electronics off when door opened

3020àTCM_LOGIC_R_OFF_DOOR set to: aktiv

Start Car by pushing button (hold brake not needed)

3000àTC_STARTLOCK_BRAKE set to: nicht_aktiv

3000àTC_STARTLOCK_DRIVINGREADINESS set to: nicht_aktiv

Increase DRL Brightness to be brighter (increases voltage to the LED Bulbs)

3062 à MAPPING_STANDL_V_L_PWM_LEVEL_1 set to: 13.7v

3062 à MAPPING_STANDL_V_R_PWM_LEVEL_1 set to: 13.7v

3062 à MAPPING_PARKL_1_V_L_PWM_1_LEFT set to: 13.7v

3062 à MAPPING_PARKL_1_V_L_PWM_2_RIGHT set to: 13.7v

Close windows, sunroof & mirror from key fob:

3056 à KOMFORTSCHLIESSUNG_FB (Comfort Access ONLY) Set to: aktiv 00

3110 à ASP_BEIKLAPPEN Set to: aktiv

3110 à ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN Werte=01

3110 à ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN Werte=01

Set Mirror Fold Delay Time

3056àKOMFORT_SCHLIESSEN Werte=00

Change Mirror Un-Fold Automatically at XX Speed (Binary value in Werte):

3110 à ASP_GESCHWINDIGKEIT_AUTO_AUSKLAPPEN Werte=14 (12Mph)

Turn off front window roll-up door interrupt (Auto-Up when door is not closed):

3050 à FH_TUERAUF_STOP_MAUT set to: nicht_aktiv

Change Triple-Blink Count to another Value:

3068 à BLINKZYKLEN_ANZAHL_TIPP

Werte = # blinks-1 (ie. 4 blinks = werte=3)

Turn on Brake Force Flashing with Hard Braking:

3068 à ESS_AKTIVIERBARER_AUSGANG set to: bremsclicht blinkend

Tilt Passenger Mirror farther down when in reverse

3110àASP_BORDSTEINAUTOMATIK_DELTA Werte=4B

Ambiance Lighting controlled independent from Dimmer Switch

3070 à AMBIENTE_NACHFUEHRUNG set to: nicht_aktiv

Enable Illumination of Exterior Door Handle LEDs when in Reverse

3070àOVT_BEI_REUCKFAHRLICHT set to: aktiv

Turn on Fog Lights with Welcome Lights:

3063 à MAPPING_NEBELSCHW_L_PART_OF Werte=10

3063 à MAPPING_NEBELSCHW_R_PART_OF Werte=10

Activate Rear Fog Lights (Euro-Switch or Mod Needed to switch in order to work):

3068à NSL_Verbaut Set to: Verbaut

3064à Mapping_Nebelschlussl_L_output Set to: nsl_l

3064à Mapping_Nebelschlussl_L_Function Set to: nebelschlusslicht

3064à Mapping_Nebelschlussl_R_output Set to: nsl_r

3064à Mapping_Nebelschlussl_R_Function Set to: nebelschlusslicht

Turn On Tail Lights with DRLs:

3062 à MAPPING_TAGFAHRL_1_V_L_OUTPUT set to: tfl_l

Auto Headlight Turn-On/Off Sensitivity:

3130àRLS_DEF_FLC_SCHWELLWERT_SATZ set to: option below
3130àRLS_FLC_SCHWELLWERT_SATZ set to: option below

Options:
normal = normal
empfindlich = sensitive
sehr_empfindlich = very sensitive
unempfindlich = insensitive

HU_NBT or HU_ENTRYNAV:

Enable AM Radio

3002àRADIO_BAND_KW set to: aktiv

Enable Hold-Mode for Range Extender

3000 à EV_MENU_AVAILABLE set to: rex

Once enabled, under Settings in iDrive à Auto eDrive to enable REx manually (once battery is below 75%)

Set cell phone ringer as primary

3001àINBAND_RINGING set to: aktiv

Disable Auto-Locking of Doors once begin driving

3000àDOOR_LOCK_AFTER_DRIVING_AWAY set to: nicht_aktiv

Change Navi Voice to British English

3000àLANGUAGE_ENGLISH_UK set to: master

3000àLANGUAGE_ENGLISH_US set to: nicht_aktiv

Video In-Motion (No Longer need to be stopped with parking brake set to view videos)

3000 à SPEEDLOCK_X_KMH_MAX werte = FF

3000 à SPEEDLOCK_X_KMH_MIN werte = FF

3000 à VIDEO_HANDBRAKE set to: nicht_aktiv

3000 à VIDEO_FRONT_LOCKED set to: nicht_aktiv

3000 à VIDEO_SPEEDLOCK_CONDITION set to: none

Navi Trip-Import

3000àNAVI_TRIP_IMPORT set to: aktiv

Navi Fuel-Stop Proposal Along Route

3000àNAVI_FUELSTOP_PROPOSAL set to: aktiv

Enable Video Files from USB

3000àENT_CODEC_OGG set to: aktiv

3000àENT_CODEC_XVID set to: aktiv

3000àENT_CODEC_VCD set to: aktiv

3003àAPI_USB_VIDEO set to: both

Add GPS Current Location to Navi Menu Items

3000àNAVI_POSITION_MENU set to: aktiv

Enable the function of saving video files to NBT Hard Drive for play later

3000 à ENT_MC_VIDEO_SUPPORT set to: aktiv

Disable Office Function Speed Lock-Out

3000à OFFICE_MESSAGES_SPEEDLOCK_CONDITION set to: nicht_aktiv

Enable Full Text Lines in Office While Driving

3003 à PIM_DRIVING_TEXT_LENGTH set to: whole text

Disable Audible Chirp/Beep When Locking Car

3000 à ACOUSTICAL_LOCK_CONFIRM set to: nicht_aktiv

Enable Speeach Input for E-Mail or SMS

3003 à SPEECH_2_TEXT set to: aktiv

Enable Time-Stamp Display for Call Log

3003 à TIMESTAMP_DISPLAY set to: aktiv

Add Temperature & PSI to tire monitor screen

3001àRDC_SAFETY set to: aktiv

Disable Legal Disclaimers

3001àLEGAL_DISCLAIMER_TIME set to: kein_ld

3001àMACRO_CAM_LEGALDISCLAIMER set to: kein_ld

3001àMACRO_NIVICAM_LDISCLAIMER set to: kein_ld

Change i-Drive Animation to ///M Logo

3001àSTARTUP_EMBLEM set to: variant_01

Change iDrive Animation to Standard BMW Connected Drive:

3001àSTARTUP_EMBLEM set to: variant_00

Enable Developer Menu

3000 à ENTWICKLER_MENUE set to: aktiv 01

IHKA Module:

HVAC System Remembers Last Setting

3000àOFF_MEMORY set to aktiv

HVAC System Remember Air ReCirculating (ALWAYS AUTO by default on startup)

3000àMEMORY_UMLUFT set to: aktiv

KOMBI or BKOMBI Module:

Show Digital Speed in MPH in Instrument Cluster (active by BC button cycle)

3000àBC_DIGITAL_V set to: aktiv

Enable GPS-Sync for Clock to Instrument Cluster

3000àGPS_UHR set to: aktiv

Alter Range Extender activation battery capacity level:

3000 àSOC_HOLD_POSITION werte = hex value xx

Units are 0.5% -- default = 0C which is 6% ie. 18 = 12%

Increase computer-limited fuel tank capacity of REX to full 2.4 US Gallons physical capacity

3005àTNK_VOLL_ANZEIGE set to: 8_liter

3005à TNK_LITER_RECHTS set to: mcv_rex_liter_kl_rechts

3005àTNK_OHM_RECHTS set to: mcv_rex_ohm_kl_rechts

PMA_PDC Module:

Enable Rear-View Camera at all Speeds

300Bàd_schwelle_2kmh werte = FF

300Bàv_schwelle_2kmh werte = FF