User Manual

I: Product Introduction

The product IPDV-120S includes a transmitter and a receiver, which can transmit the real-time video (VGA/HDMI/DVI), audio, USB and MIC signal of computer over TCP/IP protocol, and it also provide a DVI out on sender part for local operation.

The extension distance is 120meters per single pair over single cat5e cable, and it can reach 200m after connecting network switch, and support multiple cascade operation, max resolution support 1920*1080 @ 60Hz.

II: Product Specification

Size: Sender: 164mm (L)*115mm (W)*26mm (H)

Receiver: 164mm (L)*123mm (W)*26mm (H)

Weight: 0.75Kg

Extension distance: 120meters

Cable type: Cat5, Cat5e, Cat6 UTP

Resolution: Max 1920*1080

Video connector: HDMI, VGA, RJ45, USB

Video standard: 0.7Vpp

USB Support: support USB1.1, compatible with USB2.0

System Support: Windows, Linux, Unix etc

Sender power supply: DC5V/3A

Receiver power supply: DC5V/3A

USB connector: 4 USB ports on receiver part that only support keyboard, mouse and storage device

Audio connector: USB sound card to stereo audio

III: Packing instruction

When you open the package, you will find:

1, A sender

2, A receiver

3, DC5V power adaptor 2pcs

4, USB link cable 1pc

5, Video cable 1pcs

6, 1meter cat5e cable 1pc

7, Instruction manual

8, Warranty card attached on the manual

IV: Installation Steps

1, Connect sender to PC with USB and video cable, and then install the DC 5V 3A power adaptor for sender.

2, Connect sender to receiver with Cat5e cable, and the cable sequence must be 568B standard, i.e. orange-white, orange, green-white, blue, blue-white, green, brown-white, brown.

3, Install the DC 5V 3A power adaptor for receiver, and connect TV to receiver with video cable.

4, Turn on the TV, and set to the proper video signal mode, and then switch on the computer

5, Connect other USB devices to receiver, such as USB flash drive, wire or wireless mouse, keyboard etc.

6, Connect MIC and speaker to receiver

V: Keystroke instruction

1. If user needs local display, just connect the monitor to sender (if the monitor without DVI port, just use a DVI/VGA converter adaptor), and then click “SW1” button on sender to switch to the local display, and at the same time, the remote video signal will be “off”. The remote video signal will be restored by clicking the button again, in the mean time, the local video signal will be turn-off

2. The "SW2" button on sender does not have any function.

3. By clicking the “SW1” button on receiver, the communication between sender and receiver will be cut off, but the connection will be recovered by clicking the “SW1” again.

4. The “SW2” button on receiver is used to select “VIDEO MODE” and “GRAPHIC MODE”.

VI: Connection and Schematic Diagram

Connection and Schematic Diagram A:

Connection and Schematic Diagram B:

Connection and Schematic Diagram C:

VII: Indicator instruction

1, Sender

POWER LED：lighting on means power supply sender is normal

LINK LED：lighting on means data exchange and communication is normal

2, Receiver

POWER LED：lighting on means power supply receiver is normal

LINK LED：lighting on means data exchange and communication is normal

VIII: Trouble shooting

S/N / Problem / Solution
1 / Video and audio signal is not stable / 1, Check if the power adaptor of receiver is loose.
2, Check if the video and audio connector is loose, and also check if the cat5e cable is well connected.
3, Check if the USB link cable between PC and sender is loose.
2 / Remote USB device is not working / 1, Check if RJ45 connector of cat5e cable is loose, or USB link cable is loose.
2, Check if the USB devices are well connected
3, Check if cat5e cable is well connected..
3 / POWER LED is not lighting on / 1, Check if the power supply system is normal.
4 / LINK LED is not lighting on / 1, Check if the cat5e cable is well connected.
2, Check if the cable sequence is correct.

IX: Warranty and repair service

1, Promise of us

We provide 1year free-repair service starting from your purchase date if it is product quality problem. But if the problems caused by man-made reason, un-proper use etc will not enjoy the free-repair service.

2, Notes

Please keep your invoice, if you meet the quality problem, you may fill the warranty card and take the invoice to seller for repair service.

Warranty card

Model Number:
Machine number:
Purchase date:
Seller name and address :
Seller tel. &f ax :
Invoice number:
Buyer name& address:
Buyer tel. & fax:
Buyer e-mail:
Product problems:

2