Significant Figures Page 2 of 8
Astronomy Lab
Significant Figures
!!!MAC USERS!!!
This pdf file will not print correctly unless you have the correct Adobe Reader installed. Go here to download it.
http://www.adobe.com/support/downloads/product.jsp?platform=macintosh&product=10
OBJECTIVES:
Identify the significant figures in a given number.
Perform scientific calculations using the correct number of significant figures.
RESOURCES:
I assume you know how to round numbers and how to use a calculator for basic operations.
For more help on: / See:Rounding / “Parke Kunkle’s Dimensional Analysis Lecture” on reserve in the MCTC library or in his office
OR http://www.khanacademy.org/video/rounding-whole-numbers-1?playlist=Developmental+Math
AND http://www.khanacademy.org/video/rounding-whole-numbers-2?playlist=Developmental+Math
AND http://www.khanacademy.org/video/rounding-whole-numbers-3?playlist=Developmental+Math
Significant Figures / “Parke Kunkle’s Dimensional Analysis Lecture” on reserve in the MCTC library or in his office
OR http://www.khanacademy.org/video/significant-figures?playlist=Pre-algebra
AND http://www.khanacademy.org/video/multiplying-and-dividing-with-significant-figures?playlist=Pre-algebra
OR http://education-portal.com then click on Chemistry 101 then click on “Significant Figures and Scientific Notation”
BEFORE YOU COME TO LAB:
WE WILL START THIS IN LAB SO YOU DO NOT NEED TO DO THIS UNTIL LAB.
Make sure your lab notebook is prepared as described in Lab Notebook .
At the top of a right hand page in your lab notebook, enter the title “Significant Figures”.
Enter the title and the page number in the Table of Contents too.
Copy or cut and paste the OBJECTIVES for this exercise into your lab notebook.
In the PREPARATION section of your lab notebook, write or cut and paste the rules for “WHEN IS A DIGIT COUNTED AS A SIGNIFICANT FIGURE” (see the paragraphs below). Include the examples if you want.
Work as far as you can in lab on this material. Then finish it at home. Enter your work in your lab notebook (not on scratch paper or this write-up. Answers are included here so you can check yourself. We will have a quiz as indicated on the lab calendar.
BRING TO LAB: Lab notebook with above work done, pen, this write-up
PROCEDURE for in the lab and later at home:
You may staple or tape all or parts of this write-up in your lab notebook if you like.
Work the exercises in your lab notebook.
WHY BOTHER WITH SIGNIFICANT FIGURES?
Divide 2 by 3 on a calculator and you get something like 0.666666667. In science 0.67 may be good enough. Here’s why. Suppose you measure that you ran 37.5 meters in 6.4 seconds. You only know the distance to 3 digits of accuracy and you only know the time to 2 digits of accuracy. To get your average speed, divide 37.5 m by 6.4 s (37.5 m / 6.4 s). Your calculator reads 5.859375 meters per second. But you clearly do not know your speed to that many digits of accuracy. So be honest and report your result only as accurately as you know it (5.9 meters per second -- more on that later). Besides, don't write down all those digits if you don't have to. So why bother with significant figures? To be honest with how accurate you measured and to save time and effort.
WHEN IS A DIGIT COUNTED AS A SIGNIFICANT FIGURE?
Here is a newer way to count significant figures. It is easier than the older method that some of you may have learned. Either way is fine with me.
Count from left to right.
Always start counting at the first non-zero digit.
If there is a decimal, count all digits from the non-zero digit as significant.
If there is no decimal, stop counting at the last non-zero digit.
If a number is in scientific notation, apply the rules to the factor multiplying the power of ten (not to X 10n ).
Ex: 235. Start at 2. Count to the 5. Three sig. figs.
Ex: 1.287 Start at the 1. Count to the 7. Four sig. figs.
Ex: .16 Start at the 1. Count to the 6. Two sig. figs.
Ex: 3.21 X 106 Apply only to the 3.21. Three sig. figs.
Ex: 6.500 X 10-4 Apply only to the 6.500. Four sig. figs.
Ex: 3 X 108 Apply only to the 3. One sig. fig.
Ex: 3.0200 X 10-3 Start at the three. There is a decimal so count every digit. Five sig. figs.
Ex: 0.00345 Start at 3 (first non-zero digit) and count to the 5. Three sig. figs.
Ex: 34000 No decimal so two sig. figs (start at the 3 and count to the 4).
Ex: 34000. Decimal so five sig. figs. (start at the 3 and count them all).
Ex: 300 000 Start at the 3. No decimal so count the three (last non zero digit). One sig. fig.
EXACT NUMBERS:
Some numbers are exact and as such have unlimited accuracy (unlimited number of significant figures). For example, 2 times the radius of a circle equals its diameter. That 2 is an exact number and so it has an unlimited number of significant figures. Other examples occur in stating that 60 seconds equal 1 minute or that 1 meter equals 100 centimeters. These numbers are definitions and therefore have an unlimited number of significant figures. But 1 mile equals 1.609 kilometers is only an approximation so the 1.609 has four significant figures. Usually, a whole number in a formula is exact. With conversion factors, you can ask me but if they are in the same set of units (inches to feet for example) they are exact but if they switch sets of units they are not exact (miles to meters for example).
Try Practice Set 1. The answers can be found below. I encourage you to put these in your lab notebook along with any notes you want to make for yourself to help you understand.
PRACTICE SET 1: How many significant figures are in each of the following?
1) 521.9 m / 2) 503 h / 3) 0.30986 s4) 0.000 000 91 m/s / 5) 93 000 000 mi / 6) 9.1 x 10-31 kg
7) 5.4030 X 1012 Hz / 8) 0.00405 km/h / 9) 3.0 X 108 m/s
10) 0.0060070 min / 11) 0.0344 μm / 12) 89 310 AU
13) 204.50 nm / 14) 5.260 X 10-5 m / 15) 7.70 X 10-6 s
16) 2700. LY / 17) 2700 LY / 18) 2700.0 LY
19) 0.002700 ms / 20) The 60 in the 60 miles per hour on a speedometer. / 21) The 60 in 60 minutes equals 1 hour. (exact)
22) The three in “Her hybrid car used only 3 gallons of gas for that trip.” / 23) The 2 in the area of a triangle where area = (base)(height)/2 / 24) The 1 in
25) The 3 in the average of 6.2, 5.7, and 8.4 where / 26) The 2 in “He is about 2 meters tall.” / 27) The 5280 in 1mi=5280ft. (exact)
28) The 1.609 in 1mi~1.609km (approximate) / 29) The 2.54 in 1in~2.54cm (approximate) / 30) The 1 in 1mi~1.609km
Answers to Practice Set 1:
1) 4 / 2) 3 / 3) 54) 2 / 5) 2 / 6) 2
7) 5 / 8) 3 / 9) 2
10) 5 / 11) 3 / 12) 4
13) 5 / 14) 4 / 15) 3
16) 4 / 17) 2 / 18) 5
19) 4 / 20) 1 / 21) unlimited
22) 1 / 23) unlimited / 24) unlimited
25) unlimited / 26) 1 / 27) unlimited
28) 4 / 29) 3 / 30) unlimited – Even though this is an approximation, we are saying exactly 1 mi is approximately 1.609 km. Treat the 1 like a whole number.
REVIEW OF ROUNDING:
If the part you are throwing away is 5 or higher, round up.
Example 1: Round 32.355923 to 2 significant figures.
Solution: 32|.355923 becomes 32. or 32
Example 2: Round 32.355923 to 5 significant figures.
Solution: 32.355|923 becomes 32.356
Example 3: Round 32.355923 to 4 significant figures.
Solution: 32.35|5923 becomes 32.36
Example 4: Round 179 283 to 2 significant figures.
Solution: 17|9 283 becomes 180 000 (not 18)
Example 5: Round 683.28 to 1 significant figure.
Solution: 6|83.28 becomes 700 (not 7)
Example 6: Round 1499 to 3 significant figures.
Solution: 149|9 becomes 1500 (not 150)
Put it in scientific notation to express 3 sig figs. Ans: 1.50 X 103
PRACTICE SET 2: Round each number to the requested number of significant figures.
1) 24.4568 kg to 5 significant figures / 2) 24.4568 kg to 4 significant figures3) 24.4568 kg to 3 significant figures / 4) 24.4568 kg to 2 significant figures
5) 24.4568 kg to 1 significant figure / 6) 0.05535 m to 3 significant figures
7) 0.05535 m to 2 significant figures / 8) 0.05535 m to 1significant figure
9) 14535.45 mi/h to 4 significant figures / 10) 14535.45 mi/h to 3 significant figures
11) 14535.45 mi/h to 2 significant figures / 12) 14535.45 mi/h to 1 significant figure
13) 29.73 km/s to 1 significant figure / 14) 0.000 6083 s to 2 significant figures
15) 30.2 km/s to 2 significant figures / 16) 30.2 km/s to 1 significant figure
17) 16 002 to 4 significant figures / 18) 0.000 005 000 381 to 3 significant figures
Answers to Practice Set 2:
1) 24.457 kg / 2) 24.46 kg3) 24.5 kg / 4) 24 kg
5) 20 kg (no decimal point) / 6) 0.0554 m
7) 0.055 m / 8) 0.06 m
9) 14540 mi/h (no decimal) / 10) 14500 mi/h
11) 15000 mi/h / 12) 10000 mi/h
13) 30 km/s (No decimal) / 14) 0.000 61 s
15) 30. km/s (Keep decimal) / 16) 30 km/s (No decimal)
17) 1.600 X 104 / 18) 5.00 X 10-6
CALCULATIONS INVOLVING SIGNIFICANT FIGURES:
When you multiply or divide, keep the least number of significant figures.
In the example mentioned in the beginning of this write-up, the distance was measured as 37.5 m (3 significant figures) and the time was 6.4 seconds (2 significant figures). To get the average speed you divide 37.5 m by 6.4 s. Your calculator shows 5.859375. When you report your answer, use two significant figures (the least of 2 sig. fig. and 3 sig. fig.). In this case, your answer is 5.9 meters per second (round off when needed).
Here is another example. I measure the length of a piece of paper to be 27.9 cm. The width measures 21.65 cm. The area of the paper is then length times width and your calculator shows 604.035 square cm. You keep the least number of significant figures (3 from the number 27.9) so your answer is 604 square cm.
For calculations involving multiple steps, wait until you are all finished to round off.
For example:
yields 0.004130508 on a calculator. The least number of significant figures is 2 (from the 1300) so the answer is 0.0041 .
Here is another example with several steps.
Average 6.2 mm and 5.5 mm. (Keep extra digits for now because we aren’t at the end yet.)
Multiply that answer by 5.328 nm.
Divide that answer by 178 mm.
Plug that answer into ( 186 000 mi/s)
Divide that answer by 0.86 .
Now go back through all the steps to check for the LEAST number of significant figures. Here is a list of the numbers to consider and their significant figures. Do you agree?
Number(s) / Sig. Fig.6.2 mm and 5.5 mm / 2
2 (in the average) / Unlimited
5.328 nm / 4
178 mm / 3
524.628 nm / 6
186 000 mi/s / 3
0.86 / 2
The least of these is 2 significant figures so round your final answer to two significant figures giving you 72 mi/s. We will discuss the units more in another lab.
REMINDER: Report your results only as accurately as you measured. When you finish calculating, round off your answer to the least number of significant figures.
PRACTICE SET 3: Perform the following calculations. Report your results with the correct number of significant figures. These are similar to some of the calculations you will perform during the term.
3) (5.2 ft)(6.78 ft) / 4) (3.14) (930 cm) ( 930 cm)
5) / 6) ( 3.00 X 105 km/s )
7) ( 3.00 X 105 km/s ) / 8) Average 3.32 mm and 2.65 mm.
Then divide by 248.3 nm.
Then multiply by 3.0X105 km/s.
Then divide by 542.37 nm.
Then divide by 0.739
9) The volume V of a sphere is where R is the radius. Find the volume of a basketball if the DIAMETER is 26.26 cm.
Answers to Practice Set 3:
1) 0.389 mi/s / 2) 5970 m23) 35 ft2 / 4) 2 700 000 cm2
5) 5.0 X 102 s (I’d accept 500 but it’s not quite correct.) / 6) 30 km/s
7) 16 / 8) 9.0 km/s
9) 9482 cm3 if you used the pi key on your calculator. But 9480 cm3 if you used 3.14 for pi.
IN LAB EXERCISE:
1. Measure the length and width of the laminate on the table top as accurately as you can. Use the metric system. Don’t just say 60 cm when you mean 60.0 cm. Report your measurements as accurately as you can. Calculate the area of the laminate using the correct number of sig. figs. and the correct units.
2. Measure the length, width, and thickness of the table top as accurately as you can. Use metric system. Calculate the volume of the table top using the correct number of sig. figs. Use the correct units.
3. Calculate the volume of the smallest box that your chair will fit in. In this case, your measurements will not be as accurate as in 1 and 2. Report your answer using the correct units and sig. figs.
MORE RESOURCES:
Lots of websites on significant figures and rounding. Just do a web search. Examples:
Some worked examples at:
http://www.chem.tamu.edu/class/fyp/mathrev/mr-sigfg.html
http://science.widener.edu/svb/tutorial/sigfigures.html
http://chemistry2.csudh.edu/lecture_help/sigfigures.html
For a different way to count significant figures, see:
http://www.khanacademy.org/video/more-on-significant-figures?playlist=Pre-algebra
MORE DRILL: http://www.sciencegeek.net/Activities/sigfigs.html
HOMEWORK:
Finish working the problems in this write-up in your lab notebook.
Begin reading the Dimensional Analysis write-up.
Revised 15 January 2013