AURC27013A Apply Safe Working Practices

Automotive Industry RS&R AURC27013A Apply safe working practices

AURC27013A Apply safe working practices

Unit descriptor

This unit covers the competency to:

Avoid workplace hazards
Maintain cleanliness of equipment and work areas
Identify types of fire fighting equipment and their application
Carry out emergency procedures
Follow basic security procedures
Carry out basic first aid
Risk management

Element

Performance Criteria

1. Prepare for work / 1.1 Work instructions are used to determine job requirements including hazard and safety procedures
1.2 Job specifications are read and interpreted
1.3 Workplace health and safety requirements, including personal protection needs, are observed throughout the work
2. Follow workplace procedures for hazard identification and avoidance / 2.1 Hazards in the work area are recognised and appropriate control actions are taken.
2.2 Established workplace policies and procedures for controlling risks are followed.
2.3 Displayed safety signs and warnings are followed.
2.4 Safety apparel IS worn as required
2.5 Appropriate manual handling/lifting techniques are used.
3. Maintain the cleanliness of equipment and work areas / 3.1 Equipment is isolated prior to cleaning and routine maintenance operations.
3.2 Safe, approved methods for cleaning and/or maintaining equipment are used.
3.3 Equipment and work areas are cleaned/maintained according to agreed safety, preventative maintenance schedules, and where applicable, manufacturer specifications.
4. Locate and identify workplace fire extinguisher types, applications and operating procedures / 4.1 Fire extinguishers identified are to be appropriate to the type required for the workplace environment.
4.2 Fire extinguisher application and operating procedures are to be identified in accordance with equipment manufacturer specifications, OH&S legislation, statutory legislation and enterprise procedures/policies.
5. Carry out emergency procedures / 5.1 In the event of warning, procedures for isolating machines are followed.
5.2 Workplace alarm/alert/evacuation procedures are followed.
5.3 In the event of warning, appropriate professional emergency procedures for isolating machines are followed.
5.4 Appropriate professional emergency services are summoned immediately by authorised persons.
6. Follow basic security procedures / 6.1 Security policies/procedures are followed according to enterprise practices and appropriate legislation.
6.2 All Security related events are recorded/reported on the relevant forms
6.3 All staff are advised of enterprise security procedures and correct methods of implementation.
7. Carry out basic first aid / 7.1 First aid treatment is carried out correctly.
7.2 First aid treatment given is accurately reported/recorded in accordance with OH&S legislation, statutory legislation and enterprise procedures/policies.
8. Clean up work area and maintain equipment / 8.1 Material that can be reused is collected and stored
8.2 Waste and scrap is removed following workplace procedures.
8.3 Equipment and work area are cleaned and inspected for serviceable conditions in accordance with workplace procedures.
8.4 Unserviceable equipment is tagged and faults identified in accordance with workplace.
8.5 Operator maintenance is completed in accordance with manufacturer’s specifications and site procedures.
8.6 Tooling is maintained in accordance with workplace procedures.

©Australian National Training Authority AUR99 Version 4.00 Review by 30 June 2004

Automotive Industry RS&R AURC27013A Apply safe working practices

Range statement

The Range Statement provides advice to interpret the scope and context of this unit of competency, allowing for differences between enterprises and workplaces. It relates to the unit as a whole and facilitates holistic assessment. The following variables may be present for this particular unit:

Workplace Health and Safety

First Aid and Fire Fighting Equipment and Certified Personnel

Unit Scope

Work involves establishing a safe working environment in relation to the specific.

Unit Context

Workplace health and safety requirements include OH&S legislation, material safety management systems, hazardous substances and dangerous goods code and local safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate some discretion, judgement and problem solving skills in first aid safety procedures, risk management and fire fighting procedures.
Competency may be demonstrated in workplaces involved in the RS&R sector of the automotive industry.

Tools and Equipment

Tools and equipment may include, but not be limited to:

Fire fighting and First aid
Personal protection apparel
Cleaning equipment and materials
All relevant tools, equipment and machinery
Cleaning agents and lubricants
Safety apparel

Materials

Materials are to include first aid kit (as required by industry standards), Safety signage, Communication facilities

Personal Protective Equipment

Personal protective equipment is to include that prescribed Equipment under legislation, regulations and enterprise policies and practices

©Australian National Training Authority AUR99 Version 4.00 Review by 30 June 2004

Automotive Industry RS&R AURC27013A Apply safe working practices

Information and procedures

Workplace procedures relating to the use of first aid, fire extinguisher and cleaning equipment and safety apparel.
Work instructions, including first aid book, fire extinguisher identification and use sheets
Workplace procedures relating to reporting and communication
Manufacturer’s specifications and operational procedures.

©Australian National Training Authority AUR99 Version 4.00 Review by 30 June 2004

Automotive Industry RS&R AURC27013A Apply safe working practices

EVIDENCE GUIDE

The Evidence Guide identifies the critical aspects, knowledge and skills to be demonstrated to confirm competency for this unit. This is an integral part of the assessment of competency and should be read in conjunction with the Range Statement.

Critical Aspects of Evidence

Carry out emergency procedures
Selecting the correct fire extinguisher necessary
Maintaining the cleanliness of machinery, equipment and the work area
Identifying and avoiding workplace hazards
Applying basic first aid
Applying basic security procedures
Work effectively with others
Modify activities to cater for variations in workplace context and environment.

Underpinning Knowledge

OH&S regulations/Committees
Workplace safety procedures
Equipment and work area maintenance requirements
Hazard identification and avoidance in the workplace
Basic first aid procedures
Basic security procedures
The correct use and application of fire extinguishers
Manual handling techniques
Personal safety requirements
Hazchem symbols
Workplace safety policies and procedures
Procedures for reporting machinery faults and material defects.

Underpinning Skills

These include a number of processes that are learnt throughout work and life, which are required in most jobs. Some of these are covered by the national key competencies, although others may be added. The questions below highlight how these processes are applied in this competency unit. The number in brackets indicates the level to which the key competency needs to be demonstrated where (1) is where work is within set conditions and process, (2) is where the management or facilitation of conditions or process is exercised, and (3) is where the design and/or development of conditions or process is required.

How will the candidate apply the following key competency in this unit?

The candidate will need to:

Collect, Analyse and Organise Information

Collect, organise and understand information related to first aid, safety procedures, fire fighting and risk management

(Level 2)

Communicate Ideas and Information

Communicate ideas and information to enable confirmation of work requirements and specifications, co-ordination of work with site supervisor, other workers and customers, and the reporting of work outcomes and problems.

(Level 2)

Plan and Organise Activities

Plan and organise activities including the preparation and

layout of the worksite and the obtaining of equipment and materials to avoid any back tracking, workflow interruptions or wastage.

(Level 2)

Work With Others and in a Team

Work with others and in a team by recognising dependencies and using co-operative approaches to optimise workflow and productivity.

(Level 2)

Use Mathematical Ideas and Techniques

Use mathematical ideas and techniques to correctly complete measurements and estimate material requirements required for the work.

(Level 1)

Solve Problems

Use pre-checking and inspection techniques to anticipate planning and scheduling problems, avoid wastage of line and material.

(Level 2)

Use Technology

Use the workplace technology related to Occupational Health and safety including tools, equipment.

(Level 2)

Automotive Industry RS&R AURC27013A Apply safe working practices

Resource Implications

Access to certified personnel as identified in the Range Statement, standard operating procedures, First aid and fire fighting equipment and risk management procedures.

Method of Assessment

Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competency

Context/s of Assessment

Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.