Geolink Design Studio Now Available

GeoLink Design Studio Now Available

GeoLink Design Studio is NOW AVAILABLE! Beta testing with our territorial managers is complete. The latest version is 1.0.0.7. The software is $149 for registration. Follow the instructions below. ALL software questions should be forwarded to your TM first.

“I Have Dealer Meeting Demo Version”

If you DID receive the software at the dealer meeting you can simply update and register your own version.

1)Open GDS from START/Program menu or the shortcut.

2)When it prompts for “Check for updates?” say “YES”. The updates are typically small (200kB or so) and should be quick to download.

3)Upon opening go to “SETUP” menu then select “SOFTWARE REGISTRATION’. You will need to Click “RUN” a couple of times and “FINISHED”. You should eventually be seeing the following screen.

4)Click the bottom green button (all information is copied to your clipboard for pasting automatically). Open your email program. Paste (‘control v’) the clipboard into an email. Select address at top of pasted text. copy and paste in the “TO” then send and wait for response from us.

5) After we respond copy the registration code (select then ‘control c’) and paste (‘control v’) in the cell entitled registration code. Click REGISTER button.

6) You will be billed automatically in several days.

“I Don’t Have the Software but I Want It!”

If you DID NOT receive the software at the dealer meeting you can simply download your own copy.

1) Go to WaterFurnace Website follow the instructions to download the software. BEWARE! The full download is 60 MB and may take a few minutes even on a fast connection. 56k modem lines should probably just get the software from your TM. Updates will be small and should be possible on a 56kB line. You may also copy a version from any TM with a WF flash drive as well. Once installed go on to step 2.

2)Open GDS from START/Program menu or the shortcut

3)When it prompts for “Check for updates?” say “YES”. The updates are typically small (200kB or so) and should be quick to download.

4)Upon opening go to “SETUP” menu then select “SOFTWARE REGISTRATION’. You will need to Click “RUN” a couple of times and “FINISHED”. You should eventually be seeing the following screen.

5)Click the bottom green button (all information is copied to your clipboard for pasting automatically). Open your email program. Paste (‘control v’) the clipboard into an email. Select address at top of pasted text. copy and paste in the “TO” then send and wait for response from us.

6) After we respond copy the registration code (select then ‘control c’) and paste (‘control v’) in the cell entitled registration code. Click REGISTER button.

7) You will be billed automatically in several days.