Display Hidden Notes to Specifier. (Don't Know How? Click Here) s70

SECTION 13065

BULLET RESISTANT PRODUCTS

Display hidden notes to specifier. (Don't know how? Click Here)

** NOTE TO SPECIFIER ** Total Security Solutions; Bullet Resistant and physical security products.
.
This section is based on the products of Total Security Solutions, which is located at:
170 National Park Dr.
Fowlerville, MI 48836
Toll Free Tel: 888-839-6752
Tel: 517-223-7807
Fax: 517-223-0805
Email: request info ()
Web: www.tssbulletproof.com
[ Click Here ] for additional information.
Three decades of experience have made us an industry leader in bullet-resistant barrier systems, and we bring that expertise to bear on your security challenges. Everything we've learned in thousands of installations has been invested in how we assess security risks, how we select materials, how we craft those materials into bullet-resistant systems, and how we install those systems in the business environments of our customers. And while we've grown significantly over 30 years, we've never lost touch with our foundation - highly responsive customer service.

PART 1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

A. Bullet Resistant Transaction Windows.

B. Bullet Resistant Hollow Metal Windows.

C. Bullet Resistant Aluminum Windows.

D. Bullet Resistant Metal Doors.

E. Bullet Resistant Wood Doors.

F. Bullet Resistant Transaction Equipment.

G. Bullet Resistant Speakers.

H. Bullet Resistant Glazing.

I. Bullet Resistant Composite Panels.

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

A. Section 04899 - Masonry Assemblies: Masonry walls.

B. Section 05100 - Structural Metal Framing; Panel Supporting Members

C. Section 05500 - Metal Fabrications; Panel Supporting Members.

D. Section 06100 - Rough Carpentry; Panel Supporting Members.

E. Section 08710 - Door Hardware.

F. Section 08800 - Glazing.

G. Section 09300 - Plaster and Gypsum Board.

H. Section 09900 - Paints and Coatings.

1.3 REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

A. ASTM International (ASTM):

1. ASTM C 1172 - Standard Specification for Laminated Architectural Flat Glass.

2. ASTM C 920 - Standard Specification for Elastomeric Joint Sealants.

3. ASTM C 1172 - Standard Specification for Laminated Architectural Flat Glass.

4. ASTM D 2000 - Standard Classification System for Rubber Products in Automotive Applications.

5. ASTM E 84 - Test method for the Surface Burning Characteristics of Building Materials.

B. AWS D1.1 - Structural Welding Code-Steel.

C. NIJ Standard 0108.01 - (National Institute of Justice) Standard for Ballistic Resistant Protective Materials (September, 1985).

D. UL 752 - Standard for Bullet Resisting Equipment (January 27, 1995)

1.4 SUBMITTALS

A. Submit under provisions of Section 01300 - Administrative Requirements.

B. Product Data: Manufacturer's data sheets on each product to be used, including:

1. Preparation instructions and recommendations.

2. Storage and handling requirements and recommendations.

3. Installation methods.

C. Shop Drawings:

1. Submit shop drawings prepared by the manufacturer showing plans, sections, elevations, layouts, profiles and product component locations, including anchorage, bracing, fasteners, accessories and finishes.

2. Include dimensioned elevation of each type opening assembly in project; indicate sizes and locations of hardware, and lites if specified.

3. Schedule: Indicate each opening assembly in project; cross-referenced to plans, elevations, and details.

D. Design Data: Bullet resistance analysis design calculations for specific project conditions, certifying system conformance to specified performance requirements.

E. Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square representing actual product, color, and patterns.

F. Test Reports: Certified test reports showing compliance with specified performance characteristics and physical properties.

G. Closeout submittals: Warranty documents, issued and executed by manufacturer of systems, countersigned by Contractor.

1.5 QUALITY ASSURANCE

A. Manufacturer Qualifications: Company specializing in manufacturing products of the type specified with a minimum documented experience of five years.

B. Installer Qualifications: Company specializing in installation of products specified with minimum three years documented experience.

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

C. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.

1. Finish areas designated by Architect.

2. Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.

3. Refinish mock-up area as required to produce acceptable work.

4. Accepted mock-ups shall be comparison standard for remaining Work

D. Pre-installation Meetings: Conduct pre-installation meeting to verify project requirements, substrate conditions, and manufacturer's installation instructions.

E. Coordination of Work: Coordinate layout and installation of components with other construction supported by, or penetrating through, ceilings, including light fixtures, HVAC equipment, fire-suppression system, and partitions.

1.6 DELIVERY, STORAGE, AND HANDLING

A. Deliver materials in manufacturer's unopened, undamaged packaging, with manufacturer's labels intact.

B. Remove wraps or covers from doors and frames upon delivery at the building site; clean and touch-up scratches or disfigurement caused by shipping or handling promptly.

C. Store products in manufacturer's unopened packaging until ready for installation.

D. Store assemblies, off the ground and on end, to prevent damage to face corners and edges.

E. Store assemblies covered to protect them from damage but permitting air circulation.

1.7 SEQUENCING

A. Ensure that locating templates and other information required for installation of products of this section are furnished to affected trades in time to prevent interruption of construction progress.

B. Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.

1.8 PROJECT CONDITIONS

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Total Security Solutions, which is located at: 170 National Park Dr.; Fowlerville, MI 48836; Toll Free Tel: 888-839-6752; Tel: 517-223-7807; Fax: 517-223-0805; Email: request info (); Web: www.tssbulletproof.com

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01600 - Product Requirements.

2.2 APPLICATIONS/SCOPE

A. Bullet resistant protection shall be provided in the sizes and in the configuration indicated on the Drawings.

B. Furnish all hardware necessary for the joining of the components specified.

C. Provide components complete with adhesive, fasteners, and other devices required for complete assembly.

** NOTE TO SPECIFIER ** Select the bullet resistant transaction windows required from the following paragraphs and delete those not required.

2.3 BULLET RESISTANT TRANSACTION WINDOWS

A. Baffle Design Transaction Barrier Window with Natural Voice Communication: Total Security Solutions Model TSSBDT-60, Baffle Window Assembly with two way "natural voice" communication permitted by the design of the vision panels and the offset vertical side baffles and acrylic spacers. All components are cut to size with necessary holes pre-drilled and tapped where required. Edges of all glazing are polished. Aluminum anchor supports and stainless steel fasteners are provided as required for complete assembly.

** NOTE TO SPECIFIER ** Select one of the following two paragraphs and delete the one not required. Insert size as required.

1. Width:

** NOTE TO SPECIFIER ** Windows are available in single or multiple configurations. Indicate unit configurations and sizes on the Drawings.

a. Overall Size and Configuration: As indicated on the Drawings.

2. Height:

a. Size: As indicated on the Drawings.

3. Head and Sill Anchor Supports:

a. Extruded anodized aluminum angles.

b. Extruded anodized aluminum channels.

4. Side Jamb Anchor Supports: Extruded anodized aluminum angles, 1-1/4 inch by 1-1/4 inch by 1/8 inch (32 mm by 32 mm by 6 mm).

a. Baffles: To match glazing type

5. Glazing:

a. Glazing to conform to UL 752 of the following protection level.

** NOTE TO SPECIFIER ** Select protection level required from the following two paragraphs and delete those not required.

1) Level 1.

2) Level 2.

3) Level 3.

b. Glazing Type:

** NOTE TO SPECIFIER ** Select glazing type required from the following paragraphs and delete those not required.

1) Acrylic.

2) Polycarbonate/Acrylic Laminate.

3) Glass/Polycarbonate Composite.

6. Deal Tray: Model TSSDT1610, 16 inches by 10 inches (406 mm by 254 mm) from the outside edge of flanges with a clear open depth under the glazing no less than 1-1/2 inches (38 mm). Fabricate of a minimum 16 gauge (1.5 mm) stainless steel, with a No. 4 finish.

B. Natural Voice Transmission Window: Total Security Solutions Model NVRTW preassembled with two way "natural voice" communication permitted by the design of the vertical side frames and neoprene spacer glazing technique.

** NOTE TO SPECIFIER ** Windows are available in single NVRTW or multiple NVRTW-02 configurations. Indicate unit configurations and sizes on the Drawings.

1. Overall Size and Configuration: As indicated on the Drawings.

2. Frame: Stainless steel, 12 gauge (2.66 mm) with a No. 4 finish. Vertical jambs are fabricated with a minimum of 3 predrilled holes on each jamb to permit anchoring to structural backing. Hole located to prohibit access from the opposite site of the frame.

3. Frame conforms to UL 752 of the following protection level.

** NOTE TO SPECIFIER ** Select protection level required from the following paragraph and delete those not required.

a. Level 1.

b. Level 2.

c. Level 3.

4. Glazing: Top and bottom edge of the glazing to be capped with a minimum 20 gauge (0.912 mm) with a No. 4 finish.

a. Glazing to conform to UL 752 of the following protection level.

** NOTE TO SPECIFIER ** Select protection level required from the following paragraph and delete those not required.

1) Level 1.

2) Level 2.

3) Level 3.

b. Glazing Type:

** NOTE TO SPECIFIER ** Select glazing type required from the following paragraph and delete those not required.

1) Acrylic.

2) Polycarbonate/Acrylic Laminate.

3) Glass/ Polycarbonate Composite.

** NOTE TO SPECIFIER ** Shelf is optional delete if not required.

5. Shelf: Full width of window and a minimum of 12 inches (305 mm) deep centered under the glazing:

** NOTE TO SPECIFIER ** Select shelf type required from the following two paragraphs and delete the one not required.

a. Solid core covered with a black high pressure laminate.

b. Stainless steel 18 gauge (1.214 mm) minimum with a No. 4 finish.

c. Deal Tray: Model TSSDT1610, 16 inches by 10 inches (406 mm by 254 mm) from the outside edge of flanges with a clear open depth under the glazing no less than 1-1/2 inches (38 mm). Fabricate of a minimum 16 gauge (1.5 mm) stainless steel, with a No. 4 finish.

C. Natural Voice Transmission Window with Voice Communication: Total Security Solutions Model NVRTW-05 preassembled with two way "natural voice" communication permitted by the design of the vertical side frames and neoprene spacer glazing technique.

** NOTE TO SPECIFIER ** Windows are available in single or multiple configurations. Indicate unit configurations and sizes on the Drawings.

1. Overall Size and Configuration: As indicated on the Drawings.

** NOTE TO SPECIFIER ** Select frame type required from the following two paragraphs and delete the one not required.

2. Frame: Carbon steel, 16 gauge (1.5 mm) adjustable wrap frame with a prime finish. Exterior faced with bullet resistant composite. Frame conforms to UL 752 Rating Level 1 to Level 3.

3. Frame: Stainless steel, 16 gauge (1.5 mm) adjustable wrap frame with a No. 4 finish. Exterior faced with bullet resistant composite. Frame conforms to UL 752 Rating Level 1 to Level 3.

4. Glazing: Top and bottom edge of the glazing to be capped with a minimum 20 gauge (0.912 mm) with a No. 4 finish.

a. Glazing to conform to UL 752 of the following protection level.

** NOTE TO SPECIFIER ** Select protection level required from the following paragraph and delete those not required.

1) Level 1.

2) Level 2.

3) Level 3.

b. Glazing Type:

** NOTE TO SPECIFIER ** Select glazing type required from the following paragraph and delete those not required.

1) Acrylic.

2) Polycarbonate/Acrylic Laminate.

3) Glass/ Polycarbonate Composite.

** NOTE TO SPECIFIER ** Shelf is optional delete if not required.

5. Shelf: Full width of window and a minimum of 12 inches (305 mm) deep centered under the glazing:

** NOTE TO SPECIFIER ** Select shelf type required from the following two paragraphs and delete the one not required.

a. Solid core covered with a black high pressure laminate.

b. Stainless steel 18 gauge (1.214 mm) minimum with a No. 4 finish.

c. Deal Tray: Model TSSDT 1610, 16 inches by 10 inches (406 mm by 254 mm) from the outside edge of flanges with a clear open depth under the glazing no less than 1-1/2 inches (38 mm). Fabricate of a minimum 16 gauge (1.5 mm) stainless steel, with a No. 4 finish.

D. Natural Voice Transmission Window with Transparent Package Receiver and Voice Communication: Total Security Solutions Model NVRTW-07 preassembled with transparent PE package passer and two way "natural voice" communication permitted by the design of the vertical side frames and neoprene spacer glazing technique.