Combination ceiling slot diffuser für supply ans return air COMBIDSC
Specification text
Combination slot diffuser for supply and return air type COMBIDSC
Combined supply and return air diffuser suitable for wall or ceiling mounting. Highly inductive ceiling slot diffuser on the supply air side, free cross-section, resistance and sound pow-er level constant in all blade positions. Frame made of ex-truded natural colour anodised aluminium (E6/EV1) or alu-minium painted to RAL 9010 (white). Supply air element with pivoting air deflection blades in airfoil profile shape made of plastic (hard PVC). Blade colour similar to RAL 9005 (black), RAL 9010 (white) or made of aluminium painted to the RAL colour of the frame profile. Subsequent adjustment of paint-ed blades not possible. Return air element without blades, with perforated plate made of sheet steel painted to RAL 9005 (black). With plenum box made of galvanised sheet steel, with connection spigot for supply and return air and thermally insulated partition plate.
Product: SCHAKO Type COMBIDSC-...-ASK-…
Model:
-2-slot (-2) (1xSA/1xRA)
-4-slot (-4) (2xSA/2xRA)
Air throw:
-Supply air with blades / return air without blades (-ZA)
-Supply air and return air covered (-B0, dummy element, only possible without plenum box.
Frame profile:
-Standard frame profile (-R0)
-Frame with S profile (-S0)
-Frame with P profile (-P0)
Blade position:
-one-way lateral throw (-S, standard)
-vertical throw (-V)
Mounting length:
-1000mm
-1500 mm
-Band (including fishplates made of aluminium [same colour as frame] supplied loose)
Assembly:
-permanent connection to plenum box (-FV, standard)
-concealed mounting (-VM)
The aluminium end pieces (same colour as frame) are sup-plied loose as standard. If there are order details regarding fitting, mounting will take place at the factory. When the end pieces are mounted at the factory, it is essential to specify in the order whether the end piece is to be attached to both sides, or the left- or right-hand side.
Accessories:
-Additional profile, made of aluminium painted to the same colour as the frame profile.
-Z I (-Z1): Mounting of ceiling panels (for COMBIDSC-...-S0-...)
-Z II (-Z2): Mounting of panelled ceilings (for COMBIDSC-...-S0-...)
-Z III (-Z3): Mounting of ceiling panels (for COMBIDSC-...-S0-...)
-Z IV (-Z4): Mounting of light ceilings (for COMBIDSC-...-S0-...)
-Blind profile (-BP), aluminium painted to RAL colour (same colour as frame).
-Rubber lip seal (-GD1), for ASK, special rubber, only both connecting pieces (supply and return air)
-Damper for ASK
- for both laterally arranged connecting pieces (-DK3, supply and return air), with regulation plate
- for both connecting pieces from above (-DK4, supply and return air), damper inside the connecting piece.
-riveting nut M4 (-EM), for ASK, made of brass
-external insulation (-Ia), for ASK, thermal insulation at the outside of the plenum box.
- Corner angle 90°(-EW), made of aluminium (same colour as frame).