Heat & Enthalpy Changes in Chemical ReactionsName______

Period______Date______

Matching: Write the letter of the definition that best matches the term.

______1.heatA. reactions that release heat

______2.thermochemistryB. the SI unit of energy and heat

______3.exothermic reactionsC. the energy that is transferred from one object to another

______4.endothermic reactionsD. the study of the changes in heat in chemical reactions

______5.jouleE. example of an exothermic reaction

______6.combustionF. reactions that absorb heat

Energy Diagram (thermochemical vs. H)

Problems: Solve each problem and then indicate whether it is an endothermic or exothermic reaction.

7. Calculate the amount of heat released by the combustion of 1.75 mol of benzene (C6H6).

2C6H6 + 15O2 → 12 CO2 + 6H2O∆Hº = -98.0 kJ

8. How much heat is transferred when 100.0 g of calcium oxide reacts with carbon?

CaO+3C→CaC2+CO∆Hº = +464.8 kJ

9. Ammonium dichromate decomposes in a vigorous reaction when it is heated. Calculate the heat

transferred for the decomposition of 53.0 g of ammonium dichromate.

(NH4)2Cr2O7 →N2+ 4H2O+ Cr2O3∆Hº = -315 kJ

Stoichiometry of Energy Changes

10)2S + 3O2  2SO3 ∆Ho = -791.4 kJ

  1. How much heat will be released when 6.44 g of sulfur reacts?
  1. Is this reaction endothermic or exothermic?

11) C + O2  CO2∆Ho = -393.5 kJ

  1. How many grams of carbon would be required to liberate 284 kJ of thermal energy?
  1. Draw and energy diagram for this reaction.

12) H2 + Br2 + 72.80 kJ  2HBr

  1. How much heat will be absorbed when 38.2 g of bromine reacts?
  1. Is this reaction endothermic or exothermic?

13) 2P + 5Cl2  2PCl5∆Ho = -886 kJ

  1. Determine the amount of heat produced if 1.98 L of chlorine gas are reacted at STP.
  1. Write the thermochemical equation for this reaction.

14) C2H5OH + 3O2  2CO2 + 3H2O ∆Ho = -1366.7 kJ

  1. If this reaction gives off 951 kJ of heat, how many molecules of water will be produced?
  1. Will this reaction cause the surroundings to increase or decrease in temperature?

15) N2 + O2 + 180 kJ  2NO

  1. How much heat is required to react 13.7 g of nitrogen.
  1. Draw an energy diagram for this reaction

16) 3Fe + 2O2  Fe3O4+ 1120.48 kJ

  1. How many grams of iron would be required for this reaction to liberate 7985 kJ of thermal energy?
  1. Write this equation in ∆H notation.

17) 4NH3 + 5O2  4NO + 6H2O ∆Ho =-1170.0 kJ

  1. How much heat is transferred when 14.9 g of ammonia react?
  1. Rewrite this equation for 1 mole of ammonia using ∆H notation.

Energy and Change of Enthalpy

18. Indicate the following as either exothermic or endothermic.

a) CH4 + 74.4 kJ → C + 2H2 a) ______

b) 1/8 S8 + O2 → SO2b) ______

c) 3 C + 4 H2 → C3H8 + 104 kJc) ______

d) butane + oxygen → carbon dioxide + water d) ______

e) CO2 → CO + ½ O2 ΔH = +238kJe) ______

19. The energy term of an exothermic reaction is added to the (right / left) side of chemical equation because energy is (absorbed / released).

20. The ∆H of an endothermic reaction is indicated as a (+ / -) value because the enthalpy (potential energy) of the reactants is ( > / < ) than the enthalpy of the products.

21. All chemical fuels produce an (endothermic / exothermic) reaction upon ordinary combustion.

22. Baking a potato is an example of an (exothermic / endothermic ) reaction.

23. Draw an energy diagram for 4 C + S8 + 3511 kJ → 4CS2. Be sure to label all parts. (progress of the reaction, enthalpy or energy, ∆H, reactants, and products)

24. CaO + 3C → CaC2 + CO H = +464.8 k

Is this reaction endo or exothermic? ______Draw a simple energy diagram for this reaction below:

25. 2CO (g) + O2(g) → 2CO2(g) + 566.0 kJ

Is this reaction endo or exothermic? ______Draw a simple energy diagram for this reaction below:

Hess’s Law

Determining ∆H Using Hess’s Law: Each manipulated equation must be rewritten.

26)Given:2P + 3Cl2 → 2PCl3ΔH = −640. kJ

2P + 5Cl2 → 2PCl5ΔH = −886 kJ

Calculate ΔH for: PCl3 + Cl2 → PCl5

27)Given:2HF → H2 + F2ΔH = +542.2 kJ

2H2 + O2 → 2H2OΔH = −571.6 kJ

Calculate ΔH for: 2F2 + 2H2O → 4HF + O2

28)Given:4NH3 + 5O2 → 4NO + 6H2OΔH = −1170 kJ

4NH3 + 3O2 → 2N2 + 6H2OΔH = −1530 kJ

Calculate ΔH for: N2 + O2 → 2NO

29)Given:4Al + 3O2 → 2Al2O3ΔH = −3351.4 kJ

4Fe + 3O2 → 2Fe2O3ΔH = −1648.4 kJ

Calculate ΔH for: 2Al + Fe2O3 → 2Fe + Al2O3

30)Given:C + O2 → CO2ΔH = −393.5 kJ

H2 + ½ O2 → H2OΔH = −286 kJ

2C2H2 + 5O2 → 4CO2 + 2H2OΔH = −2598.8 kJ

Calculate ΔH for: 2C + H2 → C2H2

30A. Use the following thermochemical equations to determine the enthalpy change for the reaction
NO(g) + O(g) → NO2(g)ΔHrxn = ?

NO(g) + O3(g) → NO2(g) + O2(g)ΔH = −198.9 kJ

O3(g) → 3/2 O2(g)ΔH = −142.3 kJ

O2(g) → 2 O(g)ΔH = +495.0 kJ

31)Use Hess’s Law to find ΔH for the following reaction:

N2O(g) + NO2(g) → 3 NO(g)

N2(g) + O2(g) → 2 NO(g) / ΔH = +180.7 kJ
2 NO(g) + O2(g) → 2 NO2(g) / ΔH = −113.1 kJ
2 N2O(g) → 2 N2(g) + O2(g) / ΔH = −163.2 kJ

32)Calculate ΔH for: 2 F2(g) + 2 H2O(l) → 4 HF(g) + O2(g)

Given: H2(g) + F2(g) → 2 HF(g)ΔH = −537 kJ

2 H2(g) + O2(g) → 2 H2O(l)ΔH = −572 kJ

33)Apply Hess’s Law to the given equations to determine the enthalpy change for

C2H4(g) + 6 F2(g) → 2 CF4(g) + 4 HF(g)

H2(g) + F2(g) → 2 HF(g) / ΔH= −537 kJ
C(s) + 2 F2(g) → CF4(g) / ΔH= −680 kJ
2 C(s) + 2 H2(g) → C2H4(g) / ΔH= +52.3 kJ

Calorimetry

Part I:Complete each sentence with the correct term.

waterheat capacityspecific heatheatcalorimetry temperature calorimeter

34)The study of heat flow and heat measurement is called ______.

35)The words calorimeter, calorimetry and calorie are all derived from the Latin word calor, which

means ______.

36)The amount of heat needed to raise an object’s temperature depends on its ______.

37)Every substance has a ______, which tells you how much heat is necessary to raise the temperature of 1 gram of the substance by 1 degree Celcius.

38)______has one of the highest specific heats of any common substance.

39)A transfer of heat is detected by measuring a ______change.

40)A ______is a well-insulated container used to measure temperature changes.

Part II: Define the following symbols:

41)Ti______

42)Tf______

43)qrxn______

44)qsur______

45)m______

46)Cp______

47)How much heat is released when 432 g of water cools from 71.0 ºC to 18.0 ºC?

48)How many grams of a sample of calcium carbide, CaC2, will be required if as it cools from

74.2 ºC to 11.5 ºC it releases 2680 J of heat? The Cp of calcium carbide is 1.00 J/gº

50. How much heat energy is required to raise the temperature of 789 grams of acetic acid,

CH3COOH, from 25.0 ºC to 82.7 ºC? The Cp of acetic acid is 2.05 J/g ºC.

  1. What is the specific heat of aluminum if the temperature of a 28.4 g sample of aluminum is increased by 8.1 ºC when 207 J of heat is added?
  1. 15.3 g of NaNO3 were dissolved in 100.0 g of water in a calorimeter. The temperature of the water dropped from 25.00 ºC to 21.56 ºC. Calculate ∆H for this process.
  1. What is the specific heat of silicon if the temperature of a 4.11 g sample of silicon is increased by 3.8 ºC when 11.1 J of heat is added?
  1. In order to make 4 cups of tea, 1.00 kg of water is heated from 22.0 ºC to 99.0 ºC. How much heat energy was required to do this?
  1. A 1.0 g sample of octane (C8H18) is burned in a calorimeter containing 1200 g of water. The temperature of the water rises from 25.0 ºC to 33.2 ºC. Calculate ∆H for this process.
  1. A metal has a mass of 23.4 g. If it takes 6.18 J of heat to raise the temperature 1.00ºC, what is the metal’s specific heat?
  1. How much heat is required to raise the temperature of 20.0 g of iron from 26ºC to 72.30ºC. The specific heat of iron is 0.447 J/gºC.

58. What is the specific heat of aluminum if the temperature of a 28.4 g sample of aluminum is increased

by 8.1 ˚C when 207 J of heat is added?

59. How much heat is required to raise the temperature of 3.90 g of water 45 ˚C?

60. How many grams of silver (specific heat = 0.235 J/gºC) can be heated from 49.3 ºC to 60.5 ºC when

40.5 J are added?

61. What mass of water will undergo an increase of temperature of 74.2 ºC when 2905 J of heat is added?

62. What is the specific heat of titanium if the temperature of a 36.7g sample of titanium is increased by

4.8 ˚C when 91.6 J of heat is added?

Heat Review

63. Provide the following information from the above diagram:

a. Does the reaction absorb or release heat? ______

b. endothermic or exothermic ______

c. The value (number and sign) of H: ______

d. The thermochemical equation:

e. Will the temperature increase or decrease during this reaction?______

f. The value (number and sign) of H for the reverse reaction: ______

64. TiO2 + CCl4 → TiCl4 + CO2 + 155KJ

a. Rewrite the equation in H notation.

b. How many kilojoules of heat are produced if 37.8 g of CCl4 is used?

c. Draw an enthalpy diagram for the reaction.

65. If 159 J of heat are added to an unknown metal of mass 135 g, the temperature of the metal goes from 25.2ºC to 27.3ºC. Calculate the specific heat of the metal.

Reaction 1: 2MnO(s)  2Mn(s) + O2(g)H = +770.4 KJ/mol

Reaction 2: 2MnO(s) + O2(g)  2MnO2(s)H = -269.7 KJ/mol

66. Apply Hess’s Law to reactions 1 and 2 and determine the enthalpy change for the following reaction:

Reaction 3:Mn(s) + O2(g)  MnO2(s)

67. Does reaction 3 release or absorb heat?______

68. Is reaction 3 exothermic or endothermic?______

69. Will reaction 3 exhibit an increase or decrease in temperature? ______

70. Write a thermochemical equation for reaction 3.

71. Write the equation for reaction 3 in H notation.

72. Draw and fully label an energy diagram for reaction 3.

  1. Calculate the number of kilojoules of thermal energy involved if 16.9 g of MnO2 are produced according to reaction 3.
  1. Calculate the number of liters of oxygen at STP consumed upon the transfer of 2.97 KJ of heat.