- 1 -

CCS PETROL RESISTANT CONCRETE SEALER

Information & Data Sheet

Product Name:CCS Petrol Resistant Concrete Sealer

Product Description:CCS Petrol Resistant Concrete Sealer is specially formulated for surfaces exposed to petrol and mild solvents.

Recommended Uses:CCS Petrol Resistant Concrete Sealer is a high quality semi-gloss acrylic coating for concrete or masonry surfaces. The sealer has exceptional durability, chemical, mild solvent and petrol resistance.

Features:CCS Petrol Resistant Concrete Sealer has been designed to provide a concrete surface treatment for service stations, workshops and factory floors where petrol and chemical spills can be hazardous with conventional concrete sealers.

Standard acrylic concrete sealers usually become very slippery and dirty when contaminated with petrol or solvents.

CCS Petrol Resistant Concrete Sealer is designed as a two coat system on high-density surfaces. The sealer provides excellent protection against fading or leeching of oxides in concrete and staining or marking due to contaminants including grease, oil and dirt.

Colours:It is available in clear, shale grey, and black.

Packaging:20 litre & 200 litre drums.

Application Guidelines:Read Safety Directions first (see label on drum).

  1. Ensure concrete surface is clean and dry. Application of sealer to moist concrete may cause sealer to turn a white colour.
  1. Under hot weather conditions, sealer should be applied during midmorning (after concrete has dried) or late afternoon. Under cool weather conditions, apply sealer during the warmer parts of the day.
  1. Two coats of sealer should be applied to the concrete. For best results the first coat of the sealer should be diluted with CCS Solvent. Mix CCS Solvent with the sealer in the ratio 1 part Solvent to 5 parts Sealer.
  1. To apply, use a broom with a quality bristle brush head, roller or airless sprayer. Spread sealer over surface in an even and systematic way so that the concrete is completely covered with a thin layer of sealer. If “pooling” occurs, immediately spread the accumulated sealer.
  1. When the first coat has dried, apply a second coat in the same manner (as per Guideline 4).

Curing Time:Curing time depends on the temperature. The sealer is usually touch dry in 20 minutes at 25°C. It is important to allow a minimum of 1 hour between coats. The concrete can usually be walked on after 24 hours. Allow 3 to 5 days before driving or parking on the coating.

Clean Up:Wash all equipment thoroughly in CCS Solvent and allow to dry.

Anti Slip Treatment:To aid traction, mix a satchel of CCS Sealer Grip (regular or coarse) additive into sealer, prior to application of final coat.