By Sic Pyr0 and Cody
CO2 Mortar
by Sic Pyr0 and Cody
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.To start don't do this near breakable stuff like ummmmm... Cars!! seeing one of these come close to a car is scary enough -- I haven't put one through a windshield and I'm not looking forward to it. That said... on to the construction.
Materials needed
1) a box of 12 gram co2 cartrages (like what you put into a pellet gun.)2) tape (packaging is what i have use but Duct tape should work just as well. Dont use masking or another paper based tape it isnt as durable)
3) A length of 3/4 inch pvc pipe about 2-3 feet long is best.
4) a thumb tack (The upside down T shape)
Construction:
1) Take your pipe and put a peice of masking tape on it at the end.2) Put the tack in the very center of the pipe through the tape and dont press hard it kinda goes through the tape.
3) Take another piece of tape and put it on top of the tack andthen another.
4) Take the cartrige and drop it down the barrel foil side down.
It should go into the air at a reasonable speed.
I havent tried this but it should work - Take a pill bottle like prescriptions come in and attach a rubber band thats been cut with one end on each side. glue a tack on the rubber band so that when you pull it back and let it go it hits a co2 cartrige and sets it off. this would be great for a shoulder-mounted rocket style launcher so u can place a cartrige in the barrell instead of dropping it. /
/
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
If you have any questions about this, please check out our Copyright Policy.